H300
BEFORE USING YOUR HEADSET Please read this user's guide to get started, and to make the best use of the headsets many features. Product Specification Bluetooth Specification: Bluetooth Version 2.0 compliant. Power Level: Class II. Support Profile: Hands-Free, Headset (Headset role only). Standby Time: 120 hours. Talk Time: Up to 5 hours Operating Range: 10 meters (30 feet). *Above mentioned standby time and talk time will be different depending on mobile phone setting and usage environment.
Your headset overview The headset contains the following parts: 3.Charging Socket 1 2 3 4 4.Volume Down Button 5 1.Ear Hook 2.Speaker 5.Volume Up Button 6.Multi-function Button 6 7.Indicator Light 7 8.
Charging the headset This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. 1. Connect the charger to the correct outlet. 2. While the charger is connected, the red indicator light is displayed during charging. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the red indicator light turns off.
Storage of the headset Always store the headset with the power off and make sure it is safely protected. Avoid storage at high temperatures (above 40 C/104F), such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can damage performance and reduce battery life). Do not expose the headset or any of its supplied parts to rain or other liquids. BASIC OPERATIONS Turning headset On/Off To turn the headset on, press and hold the Multi-Function button for 2-4 seconds.
Pairing with your Bluetooth phone Pairing will create an encrypted wireless link between your bluetooth phone and bluetooth headset. 1. Ensure that your phone's Bluetooth feature is on (see your phone's guide for details). 2. Ensure that the headset is off (see Turning the headset on/off). 3. Press and hold the Multi-Function button for about 6-8 seconds until the indicator light alternately flashes blue and red. 4. Set your Bluetooth phone to discover the headset by following your phone's guide.
To confirm your phone and headset are operating properly, make a test call: 1. Place the headset over your ear. 2. On your phone, dial the number you want to call and press the "send" key. 3. If paired successfully, you will hear the ring tone on the headset. After headset is successfully paired , you should not need to repeat these initial setup steps each time you use the headset, unless pairing data is deleted on your phone. Wearing the headset Place the headset in your ear.
Making a call Making a voice activated call If the voice recognition feature is on, you can make a voice activated call. 1. Press the Multi- Function button once, you will hear the voice-activation tone. 2. Say the name of the person you wish to call. Depending on your phone, this feature may not be supported. Redialing the last number One of the following may or may not apply. Please refer to your mobile phone manual. To make 1. Press 2. Press 3.
Answering a call After you hear the ring tone, press the Multi-Function button once. Transferring a call between phone and headset If you answer the call with your phone, you can transfer the call to the headset by simultaneously pressing both volume control buttons once or , by using the transfer function on your phone. You can also transfer the call from the headset to the phone by simultaneously pressing both volume control buttons once or, by using the transfer function on your phone.
Adjusting the volume Press [ + ] on the top of the headset to increase the volume level and [ - ] to decrease the volume level. *For your protection, the volume may not be able to be raised to its maximum level using only your headset. Deleting all pairing data When the headset is on and disconnected from your phone, the pairing information can be deleted by pressing and holding the Multi-Function button until a long beep tone is heard.
FCC Statement Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user s authority to operate the equipment.
Warranty The condition of this warranty and our responsibilities under this warranty are as follows: Warranty is non-transferable, and is limited to the original purchaser only. * You must be able to prove the date of original purchase of the unit with a dated receipt. * The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by unauthorized third party.
