User's Manual

MODEL: ATA12WT
LED WHIPS
INSTALLATION MANUAL
EN
Model#
ATA12WT
LEFT RIGHT ATA12WT
LED WHIPS
1
INSTALLATION STEPS
DOWNLOAD APP SOFTWARE
please search BT-light inmajor appcenters, or scan below QR code
google-Android
1.Download the "BT-Light "APP with your mobile phones by scanning the QR code on user manual or search
the "BT-Light" APP in iPhone APP store or Google play store.
2.After the APP are downloaded successfully,you need to turn on Bluetooth function on your phone rstly,then
plug in the striplight,then open the APP,your APP will pair with the strip light automatically and you can control it.
☆Android phones need to open the location function and allow permission
Unable to Connect Troubleshooting
(1) Check if the power supply of the light strip is normal.
(2) Check if the Bluetooth is turn on.
(3) Check if there are other mobile phone are connected, Bluetooth 4.0 only support connections one to many,
dose not support many to many.
(4) Check APP Bluetooth setting if the phone is connected to the device, if connect, exit the APP and reopen, the
APP will go to connect automaticall.
(5) Normal operations and can not connect, please exit the APP and reopen.
(6) Exit APP, restart mobile phone, power on the strip light, reopen the APP, then them will connect automatically
IOS
Function
APP+Bluetooth +Remote Control
PARAMETER