Use and Care Manual

Important!

Please read and follow ALL instructions before assembling or using this

product, particularly the safety statements. Failure to follow instructions

and warnings could result in damage to property, serious injury or death.

Tools Required:

• Phillips Head Screwdriver

• Adjustable Wrench

Part # Quantity Part Description

A 1 Fire Bowl

B 1 Screen Lifting Tool

C 1 Spark Screen

D 4 Outer Ring Section

Hardware Pack

Stand Legs

Assembly Instructions

Step 1:

Carefully unpack all parts. Inspect for missing

parts or damage.

Parts Check List

Continued on Reverse

(M6x12mm with Nuts x 8pcs +

M6x12mm with Nuts x 9pcs + M6x10mm x 4pcs)

• Outdoor use only. Never use in enclosed area. Use in unventilated

areas will endanger your life.

• Do not use this unit on or near combustible surfaces or structures

• Use on level, non-combustible surface only.

• Keep away from all combustible materials including gasoline

property damage could result.

• Screen lifting tool may become hot when in use! Failure

to wear protective gloves may lead to injury.

metal screen and lifting tool.

• Keep away from house, garage, balconies, or overhangs.

• Avoid using during dry or windy conditions.

• Keep out of reach of children.

• Never leave unit unattended while hot or in use.

• Dispose of cold ashes properly.

Contact local authorities regarding possible burn

restrictions before using product.

WARNING!

such as wood decks, dry leaves or grass, vinyl or wood siding, etc.

42" Fire Pit

PAGE 1
42" Fire Pit Parts Check List Tools Required: • Phillips Head Screwdriver • Adjustable Wrench Important! Please read and follow ALL instructions before assembling or using this product, particularly the safety statements. Failure to follow instructions and warnings could result in damage to property, serious injury or death.
PAGE 2
Assembly Instructions (cont.) Figure 1 Figure 2 Step 2: Align holes of Fire Bowl (A) with holes of stand Legs (E). Insert short Bolts through holes of Fire Bowl and Legs and attach with Nuts (Fig 1). Attach all three (3) legs to Fire Bowl and securely fasten bolts with screwdriver and wrench. Step 3: Attach four (4) Outer Ring Sections together by inserting each end together forming ring as shown (Fig 2).