DVA200 2.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Read and pay attention to all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
TABLE OF CONTENTS Front and Back Panels ..............................................................................1 Front Panel ..............................................................................................1 Back Panel...............................................................................................1 Remote Control....................................................................................... 2 Operating the Remote Control............................................
POWER L/R PUSH DVA200 PLAY/PAUSE STOP PREV NEXT 5 1. POWER 2. PLAY/PAUSE 3. STOP 4.PREV 5.NEXT Back Panel Functions AC IN S-VIDEO YUV A/VOUT EARPHONE 4 1. PLUG PORT 2.S-VIDEO OUTPUT 3.YUV OUTPUT 4.
CONTROL POWER [1] ANGLE [2] SUBTITLE [3] TITLE [4] PBC(Playback Control) [5] PBC [18] DISPLAY DISPLAY POWER SUBTITLE ANGLE LANGUAGE RESET TITLE RESUME VOL- MUTE [19] LANGUAGE [20] RESET [21] RESUME [22] MUTE VOL+ VOL-(Volume Down) [6] [23] VOL+(Volume Up) ENTER [7] ENTER MENU SETUP MENU [8] [24] SETUP PLAY/PAUSE [9] STOP PLAY/PAUSE STEP [25] STEP STOP [10] FWD(Forward) [11] REV FWD PREV NEXT NUMBER BUTTONS [13] [26] PREV(Previous) [27] NEXT REV(Reverse) [12] 5 2 3 6 7 4
OPERATING THE REMOTE CONTROL Battery Installation 1. Push down and out on the battery compartment cover to remove it. 2. Insert the two "AAA" batteries into the battery compartment of the remote control making sure the '+' and the '-' signs on the batteries match up to the '+' and '_' markings inside the battery compartment. 3. Replace the battery compartment cover. Notes: Do not mix batteries from different manufacturers or old with new.
CONNECTING DEVICES CONNECTIONS The following is an example that illustrates how to connect your speakers to the source. MODEL:DVA200 MADE IN CHINA OUTPUT POWER:RMS 13W(8W*1+2.5W*2) OUTPUT L R L R INPUT ON AC:120V~60Hz OFF CONFORMS TO ANSI/UL STD 60065 CERTIFIED TO C 3127509 CAN/CSA STD US C22.2 NO.60065 TURNING THE SPEAKERS ON 1. Plug the power plug into an AC source. 2.Follow above connection diagram and connect speakers to your source. 3.
FUNCTIONS To play a DVD video disc: Turn on the TV set and select the A/V mode. 1. Press the POWER button on front panel, DISC LOADING appears on screen. Note: It is possible to damage a disc if it is not placed correctly on the guides in the disc tray. This may also cause the DVD player to malfunction. Do not force or place anything other than a 5" DVD or CD onto the disc tray. Never move the DVD player during playback, as this may cause damage to the disc as well as the player.
FUNCTIONS 1/2 REV Screen/Display To activate either function, simply press the FWD or REV buttons on the remote control. The speed changes each time the button is pressed. To resume normal playback, press the PLAY/PAUSE button. While a disc is playing, the status of various functions may be checked, such as the title, track number, and several time categories. 1. Press the DISPLAY button once and the title appears along with the chapter and how much time has played. DISPLAY Stop playback 1.
FUNCTIONS 2. The button may be pressed only when the flashing angle icon appears in the unit's display panel. Audio-L & Audio-R The default audio setup is STEREO. Press Audio-L, and the sound will be output from Left channel only, press Audio-R, and the soundwill be output from Right channel only. Press Audio-L or Audio-R again and the sound will return to Stereo. Subtitles Language The unit has the capability to show movies in one of eight languages. 1. Press the LANGUAGE button.
FUNCTIONS A-B Repeat Press "A-B" once to set a start-point, press again to set an end and complete the setting. The selected section A-B will be repeated. The third press will cancel this function. A-B AB PB C function With the PB C function on, choosing a song on a CD can only be done when at the main menu. With the PBC function off, song selections can be made by entering the number of the song selection with the number buttons.
SYSTEM SETUP General Setup This option is used to setup the following format and functions: Language Setup, Screen Setup, Audio setup, Custom Setup, and Exit Setup. Language Setup OSD :English Menu :English Audio : English Subtitle : English Language Setup OSD Language: There are three languages to select from English, French and Spanish. DVD MENU: When playing DVD discs, the player can support English, Chinese, Japanese, French, German, Italian, Spanish, Portuguese, Hindi, Thai and Russia.
SYSTEM SETUP Custom Setup OPERATION OF MP3 FUNCTION PARENTAL CONTROL To restrict the viewing of certain movie ratings, Parental Controls can be accessed on this menu. In order to set or change these settings, the password must first be entered. After entering the password, make sure the password is then set to OFF on the menu, and then you can set / change Parental Controls.
JPEG FILES JPEG is the most efficient image compression format and is widely used for photo / picture storage. Even when pictures are compressed 15-20 times, they still maintain an excellent quality. The JPEG format is also supported by most picture processing software. The JPEG file uses less storage space and is easy to use. This DVD player can read JPEG formatted picture CD discs. 1.Place a photo disc in the DVD player and menu will appear. 2.Press the number buttons of the selection you want to view. 3.
LIMITED 90 DAY WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a 90-day period after purchase. We will repair or replace the unit free of charge should it become defective under this warranty, providing you submit proof of purchase (sales slip) along with the unit and all accessories. During the initial 90-day period after original purchase, we will service or exchange, at no charge.
Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
