Quick start guide DLP72212/DLP72362/DLP72412 DECT 6.
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 1-3 of this manual. Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. For customer service, please visit our website at https://telephones.att.com or call 1 (800) 222-3111.
Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information f Read and understand all instructions in the user’s manual. Observe all markings on the product. f Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.
Important safety information i f f CAUTION: To prevent risk of fire or battery explosion, replace with the correct battery type. Dispose of used batteries according to the instructions. Disconnect the telephone line from the equipment before open the battery door. Do not use the battery in following conditions: f High or low extreme temperature during use, storage or transportation. f Replacement of a battery with an incorrect type that can defeat a safeguard.
Important safety information f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickelmetal hydride rechargeable batteries when taken out of service within the United States.
Table of contents Important safety information.....................................................................................................1 Install............................................................................................................................................................ 5 Handset overview............................................................................................................................... 7 Telephone base overview............................
Install Telephone base f f Notes: Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter (not included) is required. Charger Caution: Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Install Battery Install the battery, as shown below. T U A H H) -M Ni Ah LE T U A ) H IS S ID E Ô T É V E R S L E H i-M C S. N E IE S. h R LE A /C TE PI P 0m : U s 40 : AT S le V T B LE pi .4 EN RE c- (2 ER e lo 2 EM TU C in R / B 34 SS NC ch H PE T ck 83 TI PU U en Pa BT2 ER R O ué ry 2/ AV O iq te 34 G / RN ER br ÉR at B 83 NIN BU IN / Fa T1 B AR OT INC na W N S Chi O D PA in E N e ad M C R 15 35 S R . ES S.
Handset overview 1 8 9 2 10 3 11 4 12 5 13 6 14 7 15 Handset 1 CHARGE light Ì On when the handset is charging in the telephone base or charger. 2 CELL Ì Ì Press to make or answer a cell call. During a call, press to answer an incoming cell call when you hear a call waiting alert. 3 HOME/ FLASH Ì Ì Press to make or answer a home call. During a call, press to answer an incoming home call when you receive a call waiting alert.
Handset overview 6 /SPEAKER Ì Ì 7 MUTE/ DELETE/ VOICE Ì Ì Ì Ì Ì Ì Ì Ì Ì 8 VOL p Ì Ì Ì Ì VOL q CID Ì Ì Ì Ì Press to make or answer a home or cell call using the speakerphone. Press to switch between the speakerphone and the handset. During a call, press to mute the microphone. When the handset is ringing, press to mute the ringer temporarily. While reviewing the redial list, phonebook, caller ID log, block list, or the star name list, press to delete an individual entry.
Handset overview 9 MENU/ SELECT Ì Ì Press to display the menu. While in the menu, press to select an item or save an entry or setting. 10 CALL BLOCK Ì When the handset is not in use, press to show the call block menu options. When the telephone is ringing, press to block the incoming home call or cell call. When on a home call or cell call, press to block the call. Ì Ì 11 OFF/ CANCEL Ì Ì Ì Ì 12 13 OPER 0 QUIET# Ì When entering names, press to insert a space.
Handset overview HANDSET 1 ECO 10:30 1 2 AM PM NEW ANS ON MSG # 10 /16 Handset display The battery icon flashes when the battery is low and needs charging. The battery icon animates when the battery is charging. The battery icon becomes solid when the battery is fully charged. The handset ringer is turned off. There are new voicemail received from the telephone service provider. Displays when Home line is in use. 1 2 Bluetooth device is paired and active. Bluetooth device / Cell line is in use.
Telephone base overview 1 2 3 4 5 6 7 9 8 Telephone base 1 FIND HS Ì Press to page all handsets. 2 IN USE light Ì On when the handset is in use, or when the answering system is answering an incoming call. Flashes when there is an incoming call, or another telephone sharing the same line is in use. Ì 3 4 X/DELETE Ì Ì Press to delete the message currently playing. Press twice to delete all old messages when the telephone is not in use. /REPEAT Ì Ì Press to repeat a message.
Telephone base overview 5 Antenna 6 Ì Press to turn the built-in answering system on or off. 7 Ì Press to activate the voice guide for pairing cell phone or headset, or downloading cell phone phonebook to the telephone system. Ì Press and hold to add or replace a Bluetooth device. Light on when the telephone base is paired and connected with a Bluetooth device. Light flashes when the telephone base is in discoverable mode.
Initial basic settings After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. To skip setting the date and time, press OFF/CANCEL on the handset. Voice guide to set Smart call blocker and answering system After you install your telephone for the first time, the telephone base will prompt if you want to set Smart call blocker and answering system. Follow the voice guide to set or skip the settings.
Initial basic settings Date and time Note: Set the date/time before using the answering system. Using a cordless handset: 1. MENU -> / -> Set date/time -> SELECT. 2. Enter the month (MM), day (DD) and year (YY) -> SELECT. 3. Enter the hour (HH) and minute (MM). 4. / -> AM or PM -> SELECT. Record your own announcement Your outgoing announcement plays when calls are answered by the answering system. You can use the preset announcement to answer calls, or replace it with your own recorded announcement.
Initial basic settings Ringer volume You can set the ringer volume level to one of the six levels, or turn the ringer off, for incoming home or cell calls. Using a cordless handset: Set ringer volume for incoming home calls: 1. MENU -> / -> Ringers -> SELECT. 2. SELECT to select Home volume. 3. / to choose the desire level -> SELECT. Set ringer volume for incoming cell calls: 1. MENU -> / -> Ringers -> SELECT. 2. / to to select Cell volume -> SELECT. 3. / to choose the desire level -> SELECT.
Bluetooth® Add a Bluetooth® cell phone/headset Note: Your DLP72212/DLP72362/DLP72412 is compatible with Bluetooth version 2.0 or above devices. To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base. Bluetooth wireless technology operates within a short range (up to 30 feet). Keep the connected device within 15 feet of the telephone base for optimal performance.
Bluetooth® Connect to CellTM app Connect to Cell™ application consists of Caller ID manager and Alerts manager (Mobile notification). It extends the flexibility of your DLP72212/DLP72362/DLP72412 telephone system. If you are using Bluetooth-enabled cell phones with Android® OS 2.3 or above, you may download the Connect to Cell™ application from Google Play® Store. You can also scan the QR code on the right to download the application.
Bluetooth® To activate remote voice control: 1. Press MUTE/DELETE/VOICE. f If you have two connected cell phones -> / to select a device. 2. When the handset plays the confirmation tone, speak toward the handset, and then wait for feedback. Make reply to the voice app’s feedback, if necessary. 3. Press CANCEL to exit. Refer to the online Complete user’s manual for a list of troubleshooting tips on using Remote voice control feature.
Operate Operation Steps Call waiting (Requires subscription from telephone) Press HOME/FLASH on the handset to put current call on hold and to take the new call. Press HOME/FLASH on the handset at any time to switch back and forth between calls. Push-to-talk (PTT) You can use a handset to initiate two-way talk with other system handsets. Operation Steps Turn PTT on/off 1. PTT -> / -> PTT On/Off -> SELECT. 2. / -> On or Off -> SELECT. PTT call to a single device With two handsets: 1.
Phonebook The phonebook can store up to 1,200 entries, which are shared by all system devices. Operation Adding an entry in the phonebook Steps 1. MENU -> 2. / / -> Phonebook -> SELECT. -> Add contact -> SELECT. 3. Enter a telephone number up to 30 digits -> SELECT. 4. Enter a name up to 15 characters -> SELECT. Searching/dialing an entry 1. Press on the handset in idle mode -> select the desired phonebook entry. / to 2. Press HOME/FLASH or /SPEAKER on the handset to call using the home line.
Caller ID This product supports caller ID services offered by most telephone service providers. The telephone stores caller ID information of the last 50 incoming calls in the telephone base. This information is common to all devices. Call lD announce 1. MENU -> / -> Caller ID annc -> SELECT. 2. / -> On or Off -> SELECT. f f Notes: To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider. Pronunciation of names may vary with this feature.
Answering system About answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service provider’s voicemail. To listen to messages recorded on the built-in answering system, refer to the Message playback section; to listen to voicemail, contact your telephone service provider for more information.
Answering system Turn answering system on or off The answering system must be turned on to answer and record messages. Using a cordless handset: 1. MENU -> / -> Answering sys -> SELECT. 2. / -> Answer on/off -> SELECT. 3. / to choose On or Off-> SELECT. When the answering system is on, the handset shows ANS ON. Using the telephone base: f Press to turn the answering system on or off. If the answering system is turned on, it announces, “Calls will be answered.
Answering system Message playback Using the telephone base: Ì Press /PLAY/STOP when the telephone base is in idle mode. Using a cordless handset: Ì Press MENU then SELECT when the handset is in idle mode.
For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation.
For C-UL compliance f f f Remplacez les piles uniquement tel que décrit dans votre guide d’utilisation (Page 6). N’incinérez pas et ne percez pas les piles — elles contiennent des produits chimiques caustiques. L’adaptateur de courant est conçu pour être orienté verticalement ou installé sur le plancher. Les broches ne sont pas conçues pour se maintenir en place si la fiche est branchée dans une prise de courant au plafond, sous la table ou sous une armoire.
For C-UL compliance Spécifiquement en rapport avec les téléphones sans fil f f f f f Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil si pratiques créent également des restrictions. Les appels téléphoniques sont transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au sein de la portée du téléphone sans fil.
For C-UL compliance Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) : L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme.
FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.
3. How long is the limited warranty period? The limited warranty period for SynJ® and Syn248® products is TWO (2) YEARS from the date of purchase, while all other products limited warranty period is ONE (1) YEAR from the date of purchase.
2. Include “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address and telephone number. 7. Other limitations This warranty is the complete and exclusive agreement between you and Advanced American Telephones. It supersedes all other written or oral communications related to this Product. Advanced American Telephones provides no other warranties for this Product.
Technical specifications RF frequency band 1921.536MHz — 1928.448MHz Channels 5 Telephone base voltage (AC voltage, 60Hz) 96 — 130 Vrms i Telephone base voltage (DC adapter output) 6VDC @0.4A Charger voltage (DC adapter output) 6VDC @0.4A Handset voltage 2.4 VDC, AAA x 2, Ni-MH Operating times* Talk time (handset): up to 10 hours Standby: up to 5 days * Operating times vary depending on your actual use and the age of the battery.
