User Guide E12332 15060-93710000
DRAFT / 03-10-17 First Edition/ January 2017 Model:ASUS_A002(ZS571KL) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www.asus.com.
Side features Microphone Nano SIM1/ Nano SIM2/ microSD combo card slot Volume key Power key Audio jack Speaker USB Type C port NOTE: The USB Type-C port supports USB2.0 transfer rate.
DRAFT / 03-10-17 Rear features RGB sensor / Camera flash Rear camera Depth sensing camera Motion tracking camera Laser focus Rear cover
Charging your ASUS Phone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the USB Type C cable to your ASUS Phone. 3. Plug the power adapter into a wall socket. 3 2 1 • When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. • When charging your ASUS Phone through your computer, ensure that you plug the USB Type C cable to your computer’s USB 2.
DRAFT / 03-10-17 Installing a Nano SIM /MicroSD card To install a Nano SIM / MicroSD card: 1. Push a pin into the hole on the Nano SIM / MicroSD card tray to eject it. Insert the Nano SIM or MicroSD card(s) into the card slot(s). 2. Push the tray to close it. IMPORTANT: You can only use the Nano SIM2 card or the MicroSD card at a time. NOTES: • • Both Nano SIM card slots support GSM/ GPRS/EDGE, WCDMA/HSPA+/DC-HSPA+, FDD-LTE, and TD-LTE DSDS network bands.
CAUTION! • • Do not use sharp tools or solvent on your device to avoid scratches on it. Use only a standard Nano SIM card on your ASUS Phone. Using NFC You can use NFC in the following two scenarios: Reader mode: Your phone reads information from a contactless card, NFC tag, or other NFC devices. Peer-to-Peer mode: Transfers photos, contacts, or other data between your phone and an NFCenabled smartphone. Bring the NFC areas of both smartphones together, without any space between them.
DRAFT / 03-10-17 Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
• Consult the dealer or an experienced radio/TV technician for help. The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US must be fixed to US-operated channels only. Hearing Aid Compatibility Information (HAC) Your phone is compliant with the FCC Hearing Aid Compatibility requirements. M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.
DRAFT / 03-10-17 This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise.
Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in portable exposure conditions.
DRAFT / 03-10-17 Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792. html CAN ICES-3(B)/NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device and its antenna(s) must not be colocated or operated in conjunction with any other antenna or transmitter, except tested built-in radios.
To reduce exposure to RF energy, use a handsfree accessory or other similar option to keep this device from your head and body. Carry this device at least 15 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner.
DRAFT / 03-10-17 CE RF Exposure Compliance This device meets the EU requirements (1999/519/ EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 0.
For 5GHz WLAN: This equipment may be operated in: AT BE BG CH CY CZ DE DK EE ES FI FR GB GR HU IE IT IS LI LT LU LV MT NL NO PL PT RO SE SI SK TR Laser safety information CLASS 1 LASER PRODUCT To use the GPS positioning feature on your ASUS Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data.
DRAFT / 03-10-17 Safety information CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ASUS Phone care • Use your ASUS Phone in an environment with ambient temperatures between 0 °C (32 °F) and 35 °C (95 °F). The battery Your ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life.
NOTES: • • Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. The charger • Use only the charger supplied with your ASUS Phone. • Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.
DRAFT / 03-10-17 ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http:// csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. Regional notice for Singapore This ASUS Phone complies with IMDA Standards.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in fire. DO NOT short circuit the contacts. DO NOT disassemble this product.
DRAFT / 03-10-17 ASUS Address: 4F, 150 LI-TE RD., PEITOU, TAIPEI, TAIWAN Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.