User's Manual

RK626A User Manual

HOW TO USE THE RF KEYBOARD

1. Insert the receiver into the USB port.

2. Your operation system will start to install the receiver automatically. And

You can see the information as below display in your computer.

3. In Win98/Me operation system you need to follow the instructions on your

screen. During the install process, the O/S may ask you to put Win98 CD

into the CD-ROM.

4. After the install process finished, the keyboard will be working.

Better than other competition:

1. RF (2.420GHz) Any angle, up to 7 Meters.

2. 256 ID and RF-technique to Anti-interference.

3. No matter what PC Off or Battery Out, The ID will not be lost.

Notice:

If the keyboard is not working:

1. Maybe no power, please check your battery .

2. Maybe different ID, please link ID.

(1). push the button on Receiver.

(2). press “Fn” key on keyboard within 3 SEC .

CAUTION

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the authority to operate equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

PAGE 1
RK626A User Manual HOW TO USE THE RF KEYBOARD 1. Insert the receiver into the USB port. 2. Your operation system will start to install the receiver automatically. And You can see the information as below display in your computer. 3. In Win98/Me operation system you need to follow the instructions on your screen. During the install process, the O/S may ask you to put Win98 CD into the CD-ROM. 4. After the install process finished, the keyboard will be working. Better than other competition: 1. RF (2.
PAGE 2
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
PAGE 3
Power consumption 5VDC, _5%,60mA Maximum RF specification Frequency : 2.420GHz Modulation mode : GFSK Channel : 1ch ID number : 256 Link : “SW” Key Effective distance : 7M Compatible with Windows Windows 98/ME/2000/XP Dimension 60(L) * 60(W) * 22(H)mm Weight 70g max. Cable length 1800mm _ PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.