User Manual

Before Setup
AiMesh Setup Steps
AiMesh routerAiMesh node
Prepare
01
Place your AiMesh router and node within 3 meters of each
other during the setup process.
AiMesh node
02
Keep your AiMesh node powered on and standby for AiMesh
system settings.
Setting up an AiMesh WiFi system
02
1
Prepare two or more ASUS routers supporting AiMesh.
2
Assign one as AiMesh router, and another one as AiMesh node.
** If you have multiple AiMesh routers, we recommend using the router with the highest specifications as your AiMesh router and the
others as AiMesh nodes.
3
Go to AiMesh SETUP STEPS.
Setting up a standalone router
01
1
Go to ONE ROUTER SETUP STEPS.
One Router Setup
AiMesh Setup Steps
AiMesh routerAiMesh node
One Router Setup Steps
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If
it has a battery backup, remove the battery.
2
Connect your modem to the router
with the network cable provided.
3
Power on the modem. Plug modem
to the power outlet and power on.
WE SUGGEST...
Modem back
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for
internet, you will need your
username / password from
your Internet service provider
(ISP) to properly configure your
router.
Modem front
Connect your Device
02
1
Power on the router.
Plug in and press the Power On/
Off button at the back of your
router.
2
Check that the LED turns solid
blue to indicate that the hardware
connection is ready for setup.
3
[Web] Connect your PC
to the router using an
additional network cable.
[App] Or you can use a
phone or pad to complete
the setup via ASUS Router
App.
Login and Connect
03
1
[Web] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not,
navigate to http://router.asus.com.
[App] Launch ASUS Router App and follow the instructions
to complete the setup.
[Web]
1
Refer to ONE ROUTER SETUP STEPS to
connect your AiMesh router to your PC and
modem, and then log in into the web GUI.
AiMesh router
03
2
Go to Network Map page, click AiMesh
icon and then Search for your extending
AiMesh node.
3
Click Search, it will automatically search for your AiMesh
node nearby. When the AiMesh node shows on this
page, click it to add it into the AiMesh system.
** If you cannot find any AiMesh node, please go to
TROUBLE SHOOTING.
4
A message is displayed when synchronization
is completed.
5
Congratulations! You
will find the pages
below show up when an
AiMesh node has been
successfully added to
the AiMesh network.
Successfully added RT-ABCDE to your AiMesh
system, it will take awhile to show up as connected
in the AiMesh router list.
OK
within
3 meters
[App] Log in to your existing router via ASUS Router App and choose “Add AiMesh Node” to complete the setup.
ASUS ZenWiFi Pro ET12
AXE11000 Tri Band Router
Model: ET12
Quick
Start Guide
1
Plug the adapter into the DCIN port, and press the power switch.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
Button and Port Explanations
2.5G / 1G WAN port
Connect your optical modem to this
port with a network cable.
LAN ports 1-2
Connect your PC to a LAN port with
a network cable.
DC Power adapter DC Output: +19V with max 2.37A current
+19.5V with max 2.31A current
Operating Temperature 0~40
o
C Storage Temperature 0~70
o
C
Operating Humidity 50~90% Storage Humidity 20~90%
Specications:
LAN ports 1-2
WPS button
Reset button
Power switch
DCIN port
2.5G / 1G LAN port
Connect your PC to a 2.5G / 1G LAN
port with a network cable.
2.5G / 1G WAN port
2.5G / 1G LAN port
Modem
AiMesh router
AiMesh node
Logout/Reboot
AiMesh Router