ASUS ZenWiFi Pro AX11000 Tri Band WiFi Router AX11000 三頻無線路由器 Model ( 型號 ): XT12 Quick Start Guide A19130 / First Edition / September 2021 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
Table of Contents English .............................................................................................................................................................................................. 3 繁體中文 ......................................................................................................................................................................................... 8 Bahasa Indonesia....................................................................................
Hardware Explanations 1 Plug the adapter into the DCIN port, and press the power switch. 2 The power LED will light up when your hardware is ready. English Button and Port Explanations WPS button LAN ports 1-2 Reset button 2.5G / 1G WAN port Power switch 2.5G / 1G LAN port DCIN port 2.5G / 1G WAN port Connect your optical modem to this port with a network cable. LAN ports 1-2 Connect your PC to a LAN port with a network cable. 2.5G / 1G LAN port Connect your PC to a 2.
Before Setup Preparing to set up an AiMesh WiFi system 1 Find two ZenWiFi Pro XT12, and power both on. 2 Use a network cable to connect your optical modem to the WAN port of either ZenWiFi Pro XT12. English This ZenWiFi Pro XT12 will be the AiMesh router, and the other ZenWiFi Pro XT12 will be the AiMesh node. 3 The LED turns solid blue to indicate that ZenWiFi Pro XT12 is ready for setup.
AiMesh Setup Steps 01 Prepare English Place your AiMesh router and node within 3 meters of each other during the setup process. within 3 meters AiMesh node AiMesh router 02 AiMesh node Keep your AiMesh node powered on and standby for AiMesh system settings. 03 Enabling Bluetooth Enable Bluetooth on your phone. 04 Launching ASUS Router APP Launch ASUS Router APP, and then follow the on-screen instructions to finish the AiMesh setup. 5 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
Troubleshooting If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again. a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters. English b Your AiMesh node is powered on. Relocation THE BEST PERFORMANCE Locate the AiMesh router and node at the best place. NOTES: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens.
FAQ FREQUENTLY ASKED QUESTIONS Q1: Does the AiMesh router support Access Point mode? Q2: English A: Yes. You can choose to set the AiMesh router as router mode or access point mode. Please go to web GUI (http://router.asus.com), and go to the page Administration > Operation Mode. Could I setup wired connection between AiMesh routers (Ethernet backhaul)? A: Yes. AiMesh system supports both wireless and wired connection between AiMesh router and node to maximize throughput and stability.
硬體說明 1 將電源變壓器插入無線路由器的電源插孔（DC-IN），並滑動電源開關。 2 當您的路由器準備就緒後，電源指示燈將會亮起。 繁體中文 按鈕及插孔說明 WPS 按鈕 LAN 1-2 連接埠 重置按鈕 2.5G / 1G WAN 連接埠 電源開關 2.5G / 1G LAN 連接埠 電源插孔 2.5G / 1G WAN 連接埠 請使用網路線將您的數據機連接至此連接埠。 LAN 1-2 連接埠 請使用網路線將您的電腦連接至 LAN 連接埠。 2.5G / 1G LAN 連接埠 請使用網路線將您的電腦連接至 2.5G / 1G LAN 連接埠。 規格： 直流電源變壓器 DC 輸出： +19V，最大電流 2.37A； DC 輸出： +19.5V，最大電流 2.31A； 運作溫度 0~40°C 儲存溫度 0~70°C 運作濕度 50~90% 儲存濕度 20~90% 8 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
1 準備兩台ZenWiFi Pro XT12 並連接電源。 2 將網路線的一端插入您的數據機，另一端插入 ZenWiFi Pro XT12 的 WAN 連接 埠。此 ZenWiFi Pro XT12 即為 AiMesh 路由器，另一台 ZenWiFi Pro XT12 即 為 AiMesh 節點。 3 LED 指示燈變為藍色恆亮表示 ZenWiFi Pro XT12 已準備就緒。 AiMesh 節點 繁體中文 開始設定前 準備設定 AiMesh WiFi 系統 AiMesh 路由器 AiMesh 設定步驟 ASUS Router APP 下載免費的 ASUS Router APP 設定和管理您的路由器。 9 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
AiMesh 設定步驟 01 準備 設定過程中，請將 AiMesh 節點距離 AiMesh 路由器 3 公尺內。 繁體中文 3 公尺內 AiMesh 節點 AiMesh 路由器 02 AiMesh 節點 設定 AiMesh 系統時，請保持路由器處於通電及運作狀態。 03 開啟手機藍牙 請開啟手機藍牙。 04 開啟 ASUS Router App 開啟 ASUS Router App，並依照螢幕指示完成 AiMesh 設定。 10 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
疑難解決 若您的 AiMesh 路由器無法搜尋到任何附近的 AiMesh 節點或同步失敗，請檢查 以下幾個方面並重試。 繁體中文 a 將您的 AiMesh 節點移至距 AiMesh 路由器更近的地方。請確認 AiMesh 節點 距離 AiMesh 路由器 3 公尺內。 b AiMesh 節點已開機。 尋找最佳位置 優異效能 將 AiMesh 路由器和節點放置在最佳位置。 注意： 為將干擾降至最低，請將路由器放置在遠離無線室內電 話、藍牙裝置和微波爐等裝置的位置。 建議您將路由器放在開放區域的高處。 ZenWiFi Pro XT12 LED 指示燈說明 白色恆亮：訊號良好 黃色恆亮：訊號微弱 紅色恆亮：沒有訊號 11 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
FAQ 常見問題解答 AiMesh 路由器支援無線存取點模式嗎？ A: 是。您可以選擇將您的 AiMesh 路由器設定為路由器模式或無線存取點 模式。請至網頁圖形使用者介面（web GUI ）http://router.asus.
Penjelasan Perangkat Keras Bahasa Indonesia 1 Pasang adaptor ke port DCIN, lalu tekan tombol daya. 2 LED, Daya akan menyala saat perangkat keras Anda siap. Penjelasan Tombol dan Port Tombol WPS Port LAN 1~2 Tombol atur ulang Port WAN 2,5G/1G Tombol daya Port LAN 2,5G/1G Port (DC-IN) Port WAN 2,5G/1G Menyambungkan modem ke port ini dengan kabel jaringan. PORT LAN 1-2 Menyambungkan PC ke port LAN dengan kabel jaringan. Port LAN 2,5G/1G Menyambungkan PC ke port LAN 2,5G/1G dengan kabel jaringan.
Persiapan Konfigurasi Bahasa Indonesia Persiapan konfigurasi sistem WiFi AiMesh 1 Temukan dua ZenWiFi Pro XT12, dan hidupkan keduanya. 2 Gunakan kabel jaringan untuk menyambungkan modem ke port WAN salah satu ZenWiFi Pro XT12. ZenWiFi Pro XT12 ini akan menjadi router AiMesh, dan ZenWiFi Pro XT12 lainnya akan menjadi node AiMesh. 3 LED menyala biru solid untuk menunjukkan bahwa ZenWiFi Pro XT12 siap untuk konfigurasi.
Langkah-langkah konfigurasi aimesh Bahasa Indonesia 01 Persiapan Letakkan router dan node AiMesh dalam jarak 3 meter selama proses konfigurasi. dalam jarak 3 meter Node AiMesh Router AiMesh 02 Node AiMesh Pastikan Node AiMesh tetap hidup dan siaga untuk pengaturan sistem AiMesh. 03 Mengaktifkan Bluetooth Aktifkan Bluetooth di ponsel Anda. 04 Mengakses Aplikasi Router ASUS Akses Aplikasi Router ASUS, lalu ikuti petunjuk di layar untuk menyelesaikan konfigurasi AiMesh.
Penyelesaian masalah Bahasa Indonesia Jika router AiMesh tidak menemukan node AiMesh terdekat atau sinkronisasi gagal, periksa berikut ini, lalu coba lagi. a Pindahkan node AiMesh agar lebih dekat secara ideal ke router AiMesh. Pastikan router berada dalam jarak 3 meter. b Node AiMesh telah dihidupkan. Ubah lokasi PERFORMA TERBAIK Letakkan router dan node AiMesh di tempat terbaik.
FAQ TANYA JAWAB Apakah router AiMesh mendukung mode Access Point (Jalur Akses)? Bahasa Indonesia T1: J: Ya. Anda dapat memilih untuk mengatur router AiMesh sebagai mode router atau mode jalur akses. Buka GUI web (http://router.asus.com), lalu buka halaman Administration (Administrasi) > Operation Mode (Mode Operasi). T2: Dapatkah sambungan berkabel di antara router AiMesh (backhaul Ethernet) dikonfigurasi? J: Ya.
하드웨어에 대한 설명 1 어댑터를 DCIN 포트에 끼운 다음 전원 스위치 누릅니다. 2 하드웨어가 작동할 준비가 끝나면 전원 LED에 불이 들어오게 됩니다. 한국어 버튼 그리고 포트 설명 WPS 버튼 LAN 포트 1~2 리셋 버튼 2.5G/1G WAN 포트 전원 스위치 2.5G/1G LAN 포트 (DC-IN) 포트 2.5G/1G WAN 포트 네트워크 케이블을 이용해서 모뎀을 이 포트에 연결할 수 있습니다. LAN 포트 1-2 네트워크 케이블을 이용해서 PC를 LAN 포트에 연결할 수 있습니다. 2.5G/1G LAN 포트 네트워크 케이블을 이용해서 PC를 2.5G/1G LAN 포트에 연결할 수 있습니다. 사양: DC 전원 어댑터 DC 출력: 최대 2.37A 전류에서 +19V DC 출력: 최대 2.31A 전류에서 +19.
설정하기 전에 AiMesh WiFi 시스템 설정 준비하기 1 2개의 ZenWiFi Pro XT12를 찾아 모두 전원을 켭니다. 2 네트워크 케이블을 사용하여 광학 모뎀과 ZenWiFi Pro XT12 하나의 WAN 포트를 한국어 연결합니다.이 ZenWiFi Pro XT12이 AiMesh 라우터가 되고, 나머지 ZenWiFi Pro XT12이 AiMesh 노드가 됩니다. 3 LED에 파란색 불이 들어오면 ZenWiFi Pro XT12을 설정할 준비가 된 것입니다. AiMesh node AiMesh router AiMesh 설정 단계 ASUS 라우터 앱 ASUS 라우터 앱을 무료로 다운로드해서 라우터를 설정하거나 관리할 수 있습니다. 19 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
AiMesh 설정 단계 01 준비 한국어 설정 과정이 진행되는 중에는 AiMesh 라우터와 노드 간 간격이 3m 이내에 있도 록 하십시오. 3 m 이내 AiMesh node AiMesh router 02 AiMesh 노드 라우터 전원을 켠 상태에서AiMesh 시스템 설정을 대기합니다. 03 블루투스 사용 휴대폰에서 블루투스 사용. 04 ASUS 라우터 앱 시작 ASUS 라우터 앱을 시작한 후 화면 지침에 따라AiMesh 설정을 마칩니다. 참고: 무선 백홀을 사용하여 라우터와 AiMesh 노드를 연결하는 경우, AiMesh 노드 의 WAN 포트를 최대 2.5 G까지 전송 속도를 제공하는 LAN 포트로 사용할 수 있습니다. 20 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
문제해결 AiMesh 라우터가 근처에 있는 어떤 AiMesh 노드도 찾지 못하거나 동기화에 실패한 경우 다음 사항을 점검한 다음 다시 시도해 보십시오. a AiMesh 노드를 옮겨서 AiMesh 라우터와의 간격을 좁힙니다. 이때 간격은 한국어 3 m 이내이어야 합니다. b AiMesh 노드가 켜져 있어야 합니다. 위치 변경 최상의 성능 AiMesh 라우터와 노드에 최적합한 장소를 찾으십시오. 참고 : 전파 간섭을 최소화하려면 무선 전화기 , 블루투스 장치 , 전자레인지와 같은 장치 근처에 라우 터를 두지 마십시오 . 라우터를 넓고 트인 공간에 놓을 것을 권장합니다 . ZenWiFi Pro XT12 LED 의미 흰색 점등: 신호 양호 노란색 점등: 신호 미약 빨간색 점등: 신호 없음 21 APAC19130_ZenWiFi_Pro_XT12_2PK_booklet_QSG.
FAQ 자주 묻는 질문 Q1 AiMesh 라우터가 Access Point mode(액세스 포인트 모드)를 지원 합니까? 한국어 A: 예. AiMesh 시스템은 처리량과 안정성을 극대화할 수 있도록 AiMesh 라우터와 노드 간 유선 연결과 무선 연결을 모두 지원 합니다. 웹 GUI (http:// router.asus.com)로 가서 Administration(관리) > Operation Mode(작동 모드) 페이지로 들어가십시오. Q2 AiMesh 라우터(이더넷 백홀) 간에 무선 연결을 설정할 수 있습니까? A: 예. AiMesh 시스템은 처리량과 안정성을 극대화할 수 있도록 AiMesh 라우턴 간 유선 연결과 무선 연결 둘 다를 지원합니다. AiMesh는 사용 가능한 모든 주파수 대역의 무선 신호 강도를 분석한 다음 무선과 유선 중 어떤 연결이 라우터간 연결 백본으로 사용하기에 적합한지를 자동으로 결정합니다.
Penerangan Perkakasan 1 Palam masuk penyesuai ke dalam port DC-IN dan tekan suis kuasa. Bahasa Melayu 2 LED Kuasa, akan menyala apabila perkakasan anda sedia. Butang dan Port Explanations Butang WPS Port LAN 1~2 Butang tetapkan semula Port WAN 2.5G / 1G Suis kuasa Port LAN 2.5G / 1G Port (DC-IN) Port WAN 2.5G / 1G Sambung modem anda ke port ini dengan kabel rangkaian. Port LAN 1-2 Sambung PC anda ke port LAN dengan kabel rangkaian. Port LAN 2.5G / 1G Sambung PC anda ke port LAN 2.
Sebelum Penyediaan Bersedia untuk menyediakan sistem WiFi AiMesh Bahasa Melayu 1 Cari dua ZenWiFi Pro XT12 dan hidupkan kuasa kedua-duanya. 2 Gunakan kabel rangkaian untuk menyambungkan modem anda ke port WAN bagi salah satu ZenWiFi Pro XT12. ZenWiFi Pro XT12 ini akan menjadi penghala AiMesh dan ZenWiFi Pro XT12 yang lagi satu akan menjadi nod AiMesh. 3 LED bertukar menjadi biru terang untuk menunjukkan bahawa ZenWiFi Pro XT12 sedia untuk penyediaan.
Langkah-langkah Penyediaan AiMesh Bahasa Melayu 01 Sediakan Letakkan penghala dan nod AiMesh anda dalam jarak 3 meter di antara satu sama lain semasa proses penyediaan. dalam jarak 3 meter Nod AiMesh Penghala AiMesh 02 Nod AiMesh Kekalkan kuasa nod AiMesh anda hidup dan tunggu sedia untuk tetapan sistem AiMesh. 03 Mendayakan Bluetooth Mendayakan Bluetooth pada telefon anda.
Penyelesaian Masalah Jika penghala AiMesh anda tidak menemui sebarang nod AiMesh yang berdekatan atau penyegerakan gagal, sila semak perkara berikut dan cuba lagi. Bahasa Melayu a Alihkan nod AiMesh anda lebih hampir dengan penghala AiMesh dengan sempurna. Pastikan ia dalam jarak 3 meter. b Kuasa nod AiMesh anda dihidupkan. Penempatan Semula PRESTASI TERBAIK Letakkan penghala dan nod AiMesh di tempat terbaik.
FAQ SOALAN LAZIM S1 Adakah penghala AiMesh menyokong mod Titik Capaian? S2 Bahasa Melayu J: Ya. Anda boleh memilih untuk menetapkan penghala AiMesh sebagai mod penghala atau mod titik capaian. Sila pergi ke GUI web (http://router.asus.com) dan pergi ke halaman Administration (Pentadbiran) > Operation Mode (Mod Operasi). Bolehkah saya menyediakan sambungan berwayar di antara penghala AiMesh (Angkut balik Ethernet)? J: Ya.
คำ�อธิบ�ยฮ�ร์ดแวร์ 1 เสียบอะแดปเตอร์เข้ากับพอร์ต DCIN และกดสวิตช์พาวเวอร์ 2 ไฟ LED ของพาวเวอร์จะสว่างขึ้นเมื่อฮาร์ดแวร์พร้อมใช้งาน ไทย คำาอธิบายพอร์ตและปุ่ม ปุ่ม WPS พอร์ต LAN 1-2 ปุ่มรีเซ็ต สวิตช์พาวเวอร์ พอร์ต WAN 2.5G / 1G พอร์ต LAN 2.5G / 1G พอร์ตเพาเวอร์ (DC-เข้า) 2.5G / 1G WAN PORT (พอร์ต WAN 2.5G / 1G) เชื่อมต่อโมเด็มของคุณเข้ากับพอร์ตนี้ด้วยสายเคเบิลเครือข่าย LAN PORT 1-2 (พอร์ต LAN 1-2) เชื่อมต่อ PC ของคุณเข้ากับพอร์ตนี้ด้วยสายเคเบิลเครือข่าย 2.5G / 1G LAN PORT (พอร์ต LAN 2.
ก่อนการตั้งค่า การเตรียมพร้อมในการตั้งค่าระบบ WiFi ของ AiMesh 1 ค้นหา ZenWiFi Pro XT12 สองเครื่องและเปิดเครื่องทั้งคู่ เครื่องใดเครื่องหนึ่ง ZenWiFi Pro XT12 เครื่องนี้จะเป็นเราเตอร์ AiMesh และ ZenWiFi Pro XT12 อีกเครื่องจะเป็นโหนด AiMesh 3 ไฟแสดงสถานะ LED เปลี่ยนเป็นสีน้ำาเงินหยุดนิ่งเพื่อบ่งชี้ว่า ZenWiFi Pro XT12 พร้อมสำาหรับการ ไทย 2 ใช้สายเคเบิลเครือข่ายเพื่อเชื่อมต่อโมเด็มของคุณเข้ากับพอร์ต WAN ของ ZenWiFi Pro XT12 ตั้งค่าแล้ว โหนด AiMesh เราเตอร์ AiMesh ขั้นตอนก�รตั้งค่� AiMesh แอป ASUS เร�
ขั้นตอนก�รตั้งค่� AiMesh 01 จัดเตรียม วางเราเตอร์และโหนด AiMesh ของคุณไว้ภายในระยะ 3 เมตรระหว่างขั้นตอนการตั้งค่า ไทย ภายใน 3 เมตร โหนด AiMesh เราเตอร์ AiMesh 02 โหนด AiMesh เปิดโหนด AiMeshและสแตนด์บายไว้สำาหรับการตั้งค่าระบบ AiMesh 03 การเปิดใช้งานบลูทูธ เปิดใช้งานบลูทูธบนโทรศัพท์ของคุณ 04 การเรียกใช้ ASUS Router APP เรียกใช้ ASUS Router APP จากนั้นทำาตามคำาแนะนำาบนหน้าจอเพื่อทำาให้การตั้ง ค่า AiMesh เสร็จสมบูรณ์ หม�ยเหต: เมื่อคุณใช้ Backhaul ไร้ส�ยเพื่อเชื่อมต่อเร�เตอร์และโหนด AiMesh คุณส�ม�รถใช้
ก�รแก้ไขปัญห� ถ้าเราเตอร์ AiMesh ของคุณไม่สามารถค้นหาโหนด AiMesh ใกล้เคียง หรือการซิงโคร ไนซ์ล้มเหลว กรุณาตรวจสอบสิ่งต่อไปนี้และลองอีกครั้ง a ย้ายโหนด AiMesh ของคุณเข้าใกล้กับเราเตอร์ AiMesh มากขึ้น ตรวจสอบให้แน่ใจว่าภายใน 3 เมตร ไทย b โหนด AiMesh ของคุณเปิดอยู่ ก�รจัดว�งตำ�แหน่งที่ตั้งใหม่ ประสิทธิภาพที่ดีที่สุด จัดวางเราเตอร์และโหนด AiMesh ไว้ในตำาแหน่งที่ดีที่สุด หมายเหตุ: เพื่อลดสัญญาณรบกวน ให้เก็บ เราเตอร์ห่างจากอุปกรณ์ต่าง ๆ เช่น โทรศัพท์ไร้สาย อุปกรณ์บลูทูธ และเตาอบไมโครเวฟ เราขอแนะนำาให้คุณว
FAQ คำาถามที่ถามบ่อย เราเตอร์ AiMesh รองรับโหมด Access Point หรือไม่ คำาถาม 2 ฉันสามารถตั้งค่าการเชื่อมต่อแบบมีสายระหว่างเราเตอร์ AiMesh (การส่ง ต่ออีเทอร์เน็ต) ได้หรือไม่ ไทย คำาถาม 1 ตอบ: ใช่ คุณสามารถเลือกที่จะตั้งค่าเราเตอร์ AiMesh เป็นโหมดเราเตอร์ หรือโหมด Access Point กรุณาไปที่เว็บ GUI (http://router.asus.
Chú thích phần cứng 1 Cắm adapter vào cổng DCIN và nhấn nút bật/tắt nguồn. Tiếng Việt 2 Các đèn LED nguồn sẽ sáng lên khi phần cứng của bạn đã sẵn sàng. Kết nối bàn phím và chuột Nút WPS Cổng LAN 1- 2 Nút khởi động lại Cổng WAN 2.5G/1G Nút bật/tắt nguồn Cổng LAN 2.5G/1G Cổng DCIN Cổng WAN 2.5G/1G Kết nối modem của bạn với cổng này bằng cáp mạng. CỔNG LAN 1- 2 Kết nối máy tính của bạn với một cổng LAN bằng cáp mạng. Cổng LAN 2.5G/1G Kết nối máy tính của bạn với một cổng LAN 2.5G/1G bằng cáp mạng.
Trước Khi Thiết Lập Chuẩn bị thiết lập một hệ thống WiFi AiMesh 1 Tìm hai router ZenWiFi Pro XT12 và bật nguồn cả hai thiết bị. Tiếng Việt 2 Sử dụng cáp mạng để cắm modem vào cổng WAN trên cả hai router ZenWiFi Pro XT12. ZenWiFi Pro XT12 sẽ là router AiMesh và ZenWiFi Pro XT12 còn lại sẽ là bộ thu phát phân nhánh AiMesh. 3 Đèn LED chuyển sang một sắc lam để cho biết router ZenWiFi Pro XT12 đã sẵn sàng thiết lập.
Các Bước Thiết Lập AiMesh 01 Chuẩn bị Tiếng Việt Đặt router và bộ thu phát phân nhánh AiMesh cách nhau từ 3 mét trong quá trình thiết lập. trong khoảng cách 3 mét Bộ thu phát phân nhánh AiMesh Router AiMesh 02 Bộ thu phát phân nhánh AiMesh Duy trì bộ thu phát phân nhánh AiMesh ở chế độ bật nguồn và chờ cho các cài đặt hệ thống AiMesh. 03 Bật Bluetooth Bật Bluetooth trên điện thoại của bạn.
Khắc Pgục Sự Cố Nếu router AiMesh của bạn không thể tìm thấy bất kỳ bộ thu phát phân nhánh AiMesh nào gần đó hoặc quá trình đồng bộ hóa bị lỗi, hãy kiểm tra các mục sau và thử lại. Tiếng Việt a Di chuyển bộ thu phát phân nhánh AiMesh lại gần hơn với router AiMesh. Đảm bảo nó nằm trong khoảng cách 3 mét. b Bộ thu phát phân nhánh AiMesh sẽ được bật nguồn. Bố Trí Lại HIỆU SUẤT TỐT NHẤT Bố trí router và điểm phân nhánh AiMesh ở vị trí tiện lợi nhất.
FAQ Hỏi Đáp Hỏi 1 Router AiMesh có hỗ trợ chế độ Access Point (Bộ thu phát không dây)? Hỏi 2 Tiếng Việt Trả lời: Có. Bạn có thể chọn thiết lập router AiMesh dưới dạng chế độ router hoặc chế độ bộ thu phát không dây. Vui lòng truy cập GUI web (http://router. asus.com) và vào trang Administration (Quản lý) > Operation Mode (Chế độ hoạt động). Tôi có thể thiết lập kết nối có dây giữa các router AiMesh (Ethernet backhaul)? Trả lời: Có.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.
Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
India RoHS This product complies with the "India E-Waste (Management) Rules, 2016" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1 % by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.
DFS 警語 操作在 5.15~5.35/5.47~5.85GHz 之無線資訊傳輸設備 (802.
Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED) Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
Precautions for the use of the device a. Pay particular attention to the personal safety when use this device in airports, hospitals, gas stations and professional garages. b. Medical device interference: Maintain a minimum distance of at least 15 cm (6 inches) between implanted medical devices and ASUS products in order to reduce the risk of interference. c. Kindly use ASUS products in good reception conditions in order to minimize the radiation’s level. d.
AEEE Yönetmeliğine Uygundur. IEEE Yönetmeliğine Uygundur. - Bu Cihaz Türkiye analog şebekelerde çalışabilecek şekilde tasarlanmıştır. - Cihazın ayrıntılı kurulum rehberi kutu içeriğinden çıkan CD içerisindedir. Cihazın kullanıcı arayüzü Türkçe’dir. - Cihazın kullanılması planlanan ülkelerde herhangi bir kısıtlaması yoktur. Ülkeler simgeler halinde kutu üzerinde belirtilmiştir. Manufacturer ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 1F, No. 15, LIDE RD., BEITOU DIST.
Networks Global Hotline Information Area Country/ Region Service Hours 09:00-13:00; 14:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri Cyprus 800-92491 France Hungary 0033-170949400 0049-1805010920 0049-1805010923 (component support ) 0049-2102959911 (Fax) 0036-15054561 Italy 06-97626662 Greece 00800-44142044 Austria Netherlands/ Luxembourg Belgium Norway Sweden Finland Denmark Poland Spain Portugal Slovak Republic Czech Republic Switzerland-German Switzerland-French Switzerland-Italian United Kingdom Irel
Networks Global Hotline Information Area Country/ Region Australia New Zealand Japan Korea Thailand Asia-Pacific Singapore Malaysia Philippine India India(WL/NW) Indonesia Americas Hotline Numbers 1300-278788 0800-278788 0800-1232787 0081-570783886 (Non-Toll Free) 0082-215666868 0066-24011717 1800-8525201 0065-64157917 0065-67203835 (Repair Status Only) 1300-88-3495 1800-18550163 1800-2090365 0062-2129495000 500128 (Local Only) Vietnam 1900-555581 Hong Kong USA Canada Mexico 00852-35824770 1-812-28
Networks Global Hotline Information Area Middle East + Africa Country/ Region Egypt Saudi Arabia UAE Turkey South Africa Israel Romania Bosnia Herzegovina Bulgaria Balkan Countries Baltic Countries Croatia Montenegro Serbia Slovenia Estonia Latvia Lithuania-Kaunas Lithuania-Vilnius Hotline Numbers 800-2787349 800-1212787 00971-42958941 0090-2165243000 0861-278772 *6557/00972-39142800 *9770/00972-35598555 0040-213301786 Service Hours 09:00-18:00 Sun-Thu 09:00-18:00 Sat-Wed 09:00-18:00 Sun-Thu 09:00-18
