E3860 Xonar U1 External USB Audio Station Quick installation guide R
1.1 Installation requirements English To ensure a successful installation of the Xonar U1 external USB audio station, your computer must meet the following requirements: • IBM compatible PC with one USB1.1 (or higher) compatible port for the USB audio device • Microsoft® Windows® Vista/XP(32/64bit)/MCE2005 • Intel® Pentium®4 1.
Driver installation After installing the Xonar U1 external USB audio station on your computer, you need to install the device driver that enables the Xonar U1 audio station to work with Windows operating system. The version and content of the driver CD are subject to change without notice. If you have already installed the Xonar U1 external USB audio station, the Found New Hardware Wizard window may pop up before or during the driver installation. See the figure below. 1.3.1 English 1.
1.4 Hardware introduction English 1 2 R 4 3 1. 2. 3. 4.
Connecting speakers For Analog Spakers 2 Speakers 2.1 Speakers R English 1.
English For Digital Speakers SPDIF Out R Plug the optical TOSLINK adapter into the S/PDIF-Out port. Then, connect your decoder’s S/PDIF In port to the optical adapter with a TOSLINK optical cable. The TOSLINK optical cable is purchased separately.
English Connecting Line-In audio sources R Xonar U1 Quick installation guide
English Xonar U1 Quick installation guide
