VX229 Series LCD Monitor User Guide
First Edition June 2013 Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of contents Notices.......................................................................................................... iv Safety information........................................................................................ v Care & Cleaning........................................................................................... vi Takeback Services...................................................................................... vii 1.1 Welcome!.....................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view VX229H VX229N 1. 6 7 4 6 7 4 2 7 4 2 7 Button: • Activates the QuickFit function. (Please refer to 1.3.3 QuickFit Function). • Press this hotkey to switch from six video preset modes (Scenery Mode, Standard Mode, Theater Mode, Game Mode, Night View Mode, and sRGB Mode) with SPLENDID™ Video Intelligence Technology. • Exit the OSD menu or go back to the previous menu as the OSD menu is active.
4. MENU Button: • Turns on the OSD menu. • Enacts the selected OSD menu item. • Press this button for 5 seconds to activate the Key Lock function. Press it again for 5 seconds to disactivate the function. • Increases values or moves your selection right/up. • Brightness hotkey 5. Button: 6. Input Select Button: • Selects an available input source (only available in VX229H models).
1.3.2 Back view VX229H HDMI HDMI 2 VGA HDMI 1 VGA HDMI 1 2 4 6 VX229N DVI DVI VGA 7 2 VGA 5 6 1-4 1. HDMI port: This port is for connection with an HDMI compatible device. 2. VGA port: This 15-pin port is for PC VGA connection. 3. Audio-in port: This port connects PC audio source by the bundled audio cable. 4. Earphone jack: This port connects to an earphone. 5. DC-in port: This port connects the adapter. 6.
1.3.3 QuickFit Function The QuickFit function allows users to have a preview of the document or photo layout directly on screen without printing test copies. QuickFit has two patterns: a. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. Alignment Grid EXIT b. QuickFit Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen.
1.3.4 GamePlus Function The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. In addition, Aimpoint function is specially designed for new gamers or beginners who are interested in First Person Shooter (FPS) games. To activate GamePlus: 1. Press the MENU button to activate the OSD menu. 2. Press and to select System Setup and press the MENU button to enter the System Setup sub-menu. 3.
2.1 Assembling the monitor base 2.1.1 Assembling the base 1. Have the front of the monitor face down on a table. 2. Attach the base to the arm and fix with the screw to join them tightly. You can easily tighten the screw by fingers. 3. Adjust the monitor to the angle that is most comfortable for you. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.1.2 2-2 Detaching the base 1. Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. 2. Use your fingers to loosen the screw located at the bottom of the base, and remove the base from the stand. 3. Or, you may directly use a screwdriver to remove the screw that secures the base to the stand, and detach the base from the stand. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling while changing its angle. • You can adjust the monitor’s angle from -5˚ to 20˚. -5 to +20 It is normal that the monitor slightly shakes while you adjust the viewing angle. 2.
VX229N DVI DVI VGA VGA DC-IN DVI • • VGA To connect the power cord: a. Connect the adapter to the monitor's DC input. b. Connect one end of the power cable to the adapter, and the other end to a power outlet. To connect the VGA, HDMI, or DVI cable: a. Plug one end of the VGA, HDMI, or DVI cable to the monitor's VGA, HDMI, or DVI port. b. Connect the other end of the VGA, HDMI, or DVI cable to your computer's VGA, HDMI, or DVI port. c.
2.4 Turning on the monitor Press the power button . See 1.3.1 Front view for the location of the power button. The power indicator monitor is ON.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. 2. Press the MENU button to activate the OSD menu. VX229 Splendid Scenery Mode Color Standard Mode Image Theater Mode Input Select Game Mode System Setup Night View Mode Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions.
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR functions are not user-configurable. In the sRGB Mode, the Brightness, Contrast, Saturation, Color Temp., Skin Tone, Sharpness, and ASCR functions are not userconfigurable. 2. Color You can adjust Brightness, Contrast, Saturation, Color Temp., and Skin Tone from this menu. • Brightness: the adjusting range is from 0 to 100. button is a hotkey to activate this function.
• Position: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (only available for VGA input). • Focus: reduces the Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100. • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal distrubances.
• ECO Mode: Activate the ecology mode for power saving. (Some gray levels may not be distinguished if ECO is ON. Its brightness is lower than that when setting the Contrast Ratio to 100.) • OSD Setup: Adjust the horizontal postition (H-Position), vertical position (V-Position), OSD Timeout, DDD/CI, and Transparency of the OSD screen. • Language: Select OSD language. The selections are English, French, German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified Chinese, and Japanese.
3.2 Specifications Summary VX229H Model Name TFT LCD Panel Size 21.5” (16:9, 68.6 cm) wide screen Max. Resolution 1920 x 1080 Brightness (Typ.) 250 cd/m2 (Center 1 point, type) Contrast Ratio (Typ.) 1000:1 (Typical) ASUS Smart Contrast Ration (ASCR) ≥ 80,000,000:1 (with ASCR on) Color Saturation (NTSC) 72 % (Typ) Viewing Angle (H/V) CR>10 178° (H) / 178° (V) Display Colors 16.7 M colors (6 bits + Advanced-FRC) Response Time 5ms GTGσ Pixel Pitch 0.24795(H)mm x 0.
VX229H Model Name VX229N 40W adaptor DC 19V 2.1A, 100~240V at 50/60Hz Voltage Rating AC adaptor: Enertronix, EXA1204YH AD adaptor: Delta, ADP-40KD BB Power Consumption Power On: 26W (max), Standby: < 0.5W at AC110V~ AC220V Power Off: < 0.5W at AC110V~ AC220 Temperature (Operating) 0 ~ 40° C Temperature (Non-operating) -30 ~ 65° C Dimensions (W x H x D) Power On: 24W (max), Standby: < 0.5W at AC110V~ AC220V Power Off: < 0.5W at AC110V~ AC220V 371.3 x 499.8 x 210.
3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the adapter and power cable are properly connected to the monitor and the power outlet. The power LED lights amber and • Check if the monitor and the computer are in the there is no screen image ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent.
3.4 Mode Supported operating modes Resolution DOS 720x400@70Hz 640x480@60Hz VGA 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz SVGA 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz XGA 1024x768@75Hz VESA 1152x864@75Hz 1280x1024@60Hz 1280x1024@75Hz SXGA 1280x960@60Hz 1280x800@60Hz 1280x720@60Hz WXGA 1280x768@60Hz 1360x768@60Hz 1366x768@60Hz WXGA+ 1440x900@60Hz UXGA 1600x1200@60Hz WSXGA+ 1680x1050@60Hz 1920x1080@60Hz WUXGA 1920x1080@60Hz MAC 640x480@66.
