VivoMini VC66 Series User Manual
E12343 Revised Edition V2 December 2016 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual.............................................................................................. 4 Conventions used in this manual................................................................ 4 Typography.......................................................................................................... 4 Package contents................................................................................................ 5 Getting to know your VivoMini Features.................
About this manual This manual provides information about the hardware and software features of your PC, organized through the following chapters: Chapter 1: Getting to know your VivoMini This chapter details the hardware components of your VivoMini. Chapter 2: Using your VivoMini This chapter provides you with information on using your VivoMini.
Package contents Your VivoMini package contains the following items: VivoMini Power cord* Technical documentations AC power adapter* NOTE: • * Actual product specifications and package contents may vary depending on the model type, country, or region. • I f the device or any of its components fail or malfunction during normal or proper use and it is still within the warranty period, bring the device and the warranty card to you nearest ASUS Service Center.
VivoMini VC66 Series
1 Getting to know your VivoMini
Features Front panel Top cover The removable top cover allows you access to the hard disk drive and the memory modules. IMPORTANT! Before removing the top cover, turn off your VivoMini and unplug the power cable. Optical Drive (on selected models) Your VivoMini's optical drive may support several disc formats such as CDs, DVDs, recordable discs, or rewritable discs. Headphone jack This port allows you to connect amplified speakers or headphones. USB 3.0 port The USB 3.0 (Universal Serial Bus 3.
USB 3.0 Type-C port This USB Type-C (Universal Serial Bus Type-C) port provides a maximum of 1.5A output current, transfer rate of up to 5 Gbit/s, and is backward compatible to USB 2.0. NOTE: The Type C port has a reversible-plug connector. USB 2.0 port The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, flash disk drives, external HDDs, speakers, cameras and printers.
Left side Air vents The air vents allow air to enter your VivoMini chassis. IMPORTANT! For optimum air flow, ensure that the air vents are free from obstructions. Right side Air vents The air vents allow air to enter your VivoMini chassis. IMPORTANT! For optimum air flow, ensure that the air vents are free from obstructions.
Rear panel Kensington® security slot The Kensington® security slot allows you to secure your VivoMini using Kensington® compatible VivoMini security products. Power input The bundled power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the VivoMini. To prevent damage to the VivoMini, always use the bundled power adapter. WARNING! The power adapter may become warm or hot when in use. Do not cover the adapter and keep it away from your body.
HDMI port The HDMI (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow viewing on a larger external display. DisplayPort The DisplayPort sends high-performance digital output from your VivoMini to a display device such as an LCD TV or HD monitor. LAN port The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. USB 3.0 port The USB 3.0 (Universal Serial Bus 3.
Using your VivoMini 2
Getting started Connect the AC power adapter to your VivoMini To connect the AC power adapter to your VivoMini: A. Connect the power cord to the AC power adapter. B. Plug the AC power adapter into a 100V~240V power source. C. Connect the DC power connector into your VivoMini’s power (DC) input. IMPORTANT! • e strongly recommend that you use only the AC power cord W that came with your VivoMini. • e strongly recommend that you use a grounded wall socket W while using your VivoMini.
Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your VivoMini. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your VivoMini: Connect the USB cable from your keyboard and mouse to any of the USB ports of your VivoMini.
Connect a display panel to your VivoMini You can connect a display panel or projector to your VivoMini that has the following connectors: • HDMI connector • DisplayPort connector • DVI connector To connect a display panel to your VivoMini: Connect a display cable either to the HDMI, DisplayPort or DVI port.
Connecting display via DVI port VivoMini VC66 Series 17
Turn on your VivoMini Press the power button to turn on your VivoMini.
Turning your VivoMini off If your VivoMini is unresponsive, press and hold the power button for at least four (4) seconds until your VivoMini turns off. Putting your VivoMini to sleep To put your VivoMini on Sleep mode, press the Power button once. Entering the BIOS Setup BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the VivoMini. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance.
Quickly enter the BIOS To quickly enter the BIOS: • Press the power button for at least four (4) seconds to shut down your VivoMini, then press the power button again to turn your VivoMini back on, then press or during POST. • When your PC is off, disconnect the power cord from your VivoMini’s power connector. Reconnect the power cable and press the power button to turn on your VivoMini. Press or during POST.
Upgrading your VivoMini 3
Upgrading memory modules Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2GB, 4GB, 8GB, or 16GB unbuffered non-ECC 1.35 V DDR4 260-pin SO-DIMMs for a maximum of 32GB memory. IMPORTANT! Refer to http://www.asus.com for the list of compatible DIMMs. You can only install 1.35 V DDR4 SO-DIMM to the VivoMini’s DIMM slots. NOTE: The illustrations in this section are for reference only and may vary per model. To install or upgrade the memory modules: 1.
4. Lift and remove the top cover and set it aside. IMPORTANT! Remove the top cover carefully to prevent pulling on and causing damage to the cables connected. This may vary per model. 5. Remove the screw from the HDD layer.
6. Lift open the HDD layer. IMPORTANT! Lift the HDD layer carefully to prevent pulling on and causing damage to the cables connected. 7. 24 Align and insert the memory module into the slot and press it down (A) until the retaining clips snaps back into place and it is securely seated in place. Repeat the same steps to install the other memory module.
8. Replace the HDD layer. NOTE: Ensure to organize the cables to prevent any damage to your VivoMini and to ensure the HDD layer can be replaced successfully. 9. Replace the screw to secure the HDD layer.
10. Replace the top cover of your VivoMini NOTE: Ensure to organize the cables to prevent any damage to your VivoMini and to ensure the top cover can be replaced successfully. 11. Reattach the screws to secure the cover back on the bottom side of the main box, then replace the rubber feet back on each screw hole.
Installing or upgrading the M.2 SSD NOTE: The illustrations in this section are for reference only and may vary per model. Your VivoMini includes a M.2(NGFF) slot that supports a M.2 2280 SSD. To install or upgrade the M.2 SSD: 1. Follow steps 1-6 under the Upgrading memory modules section to remove the top cover and HDD layer of your VivoMini. 2. Align and insert the M.2 SSD into its slot inside the VivoMini, then secure it with a screw. 3.
Installing or upgrading the wireless card NOTE: The illustrations in this section are for reference only and may vary per model. Your VivoMini includes a M.2(NGFF) slot that supports a M.2 2230 wireless and bluetooth module. To install or upgrade a wireless card: 28 1. Follow steps 1-6 under the Upgrading memory modules section to remove the top cover and HDD layer of your VivoMini. 2. Align and insert the wireless card into its slot inside the VivoMini (A), then secure it with a screw (B). 3.
Installing 2.5” HDD / SSD NOTE: • T he illustrations in this section are for reference only and may vary per model. • This bay supports 7mm/9.5mm 2.5” HDDs/SSDs. • Some models may only support one (1) HDD/SSD. To install or upgrade the HDD / SSD: 1. Follow steps 1-4 under the Upgrading memory modules section to remove the top cover of your VivoMini. 2. Remove four (4) screws from the HDD/SSD bracket. 3. Remove the HDD/SSD bracket. 4.
NOTE: • E nsure to remove the holder from the bracket when installing an HDD/SDD to the bracket. • T he availablility of the holder may vary depending on the model type, country, or region. 30 5. To install a new HDD/SSD, secure the HDD/SSD to the bracket using the bundled four (4) screws. 6. Connect the cable to the HDD/SSD, then align the bracket to the HDD/SSD compartment of your VivoMini and secure the bracket with the screws previously removed. 7.
Appendix
Safety information Your VivoMini is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation.
• If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. – The power cord or plug is damaged. – Liquid has been spilled into the system. – The system does not function properly even if you follow the operating instructions. – The system was dropped or the cabinet is damaged. – The system performance changes. Lithium-Metal Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced.
Regulatory notices REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
ISED Radiation Exposure Statement for Canada This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with ISED RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Regional notice for Malaysia CIDF15000026 Regional notice for California WARNING! This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling. ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Rd., Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 http://www.asus.com +86-21-3842-9911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://usa.asus.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Asus Computer International Responsible Party Name: 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : VivoMini Model Number : VC66,VC66R Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
VivoMini VC66 Series
