VivoMini VC65 Series User Manual
E11262 Revised Edition V3 January 2016 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual.............................................................................................. 4 Conventions used in this manual................................................................ 4 Typography.......................................................................................................... 4 Package contents................................................................................................ 5 Getting to know your VivoMini Features.................
About this manual This manual provides information about the hardware and software features of your PC, organized through the following chapters: Chapter 1: Getting to know your VivoMini This chapter details the hardware components of your VivoMini. Chapter 2: Using your VivoMini This chapter provides you with information on using your VivoMini.
Package contents Your VivoMini package contains the following items: Technical documentations VivoMini Keyboard (optional)** Power cord* Mouse (optional)** Driver DVD** NOTE: • *Actual product specifications and package contents may vary depending on the model type, country, or region. • **The availability and quantity of these items vary with your VivoMini package.
VivoMini VC65 Series
1 Getting to know your VivoMini
Features Front panel Top cover The removable top cover allows you access to the hard disk drive and the memory modules. IMPORTANT! Before removing the top cover, turn off your VivoMini and unplug the power cable. Drive activity indicator This indicator lights up when your VivoMini is accessing the internal storage drive. USB 3.0 port The USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate up to 5 Gbit/s and is backward compatible to USB 2.0.
Left side Air vents The air vents allow air to enter your VivoMini chassis. IMPORTANT! For optimum air flow, ensure that the air vents are free from obstructions. Right side Air vents The air vents allow air to exit your VivoMini chassis. IMPORTANT! For optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions. Memory card slot This built-in memory card reader slot supports MMC, SD, SDHC, and SDXC card formats.
Rear panel USB 3.0 port The USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate up to 5 Gbit/s and is backward compatible to USB 2.0. NOTE: On selected models these ports are USB 2.0 ports. Top cover lock latch + Kensington® security slot The top cover lock latch fastens the top cover on your VivoMini. The Kensington® security slot allows you to secure your VivoMini using Kensington® compatible VivoMini security products.
LAN port The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. Serial (COM) connector The 9-pin serial (COM) connector allows you to connect devices that have serial ports such as mouse, modem, or printers. Power (AC) input port Insert the power cord into this port to supply power to your VivoMini. Headphone jack This port allows you to connect amplified speakers or headphones.
Air vents The air vents allow air to enter your VivoMini chassis. IMPORTANT! For optimum air flow, ensure that the air vents are free from obstructions.
Using your VivoMini 2
Getting started Connect the AC power cord to your VivoMini To connect the AC power cord to your VivoMini: A. Connect the AC power cord to the AC-IN port. B. Plug the AC power cord into a 100V~240V power source. IMPORTANT! • We strongly recommend that you use only the AC power cord that came with your VivoMini. • We strongly recommend that you use a grounded wall socket while using your VivoMini. • The socket outlet must be easily accessible and near your VivoMini.
Connect a display panel to your VivoMini You can connect a display panel or projector to your VivoMini that has the following connectors: • HDMI connector • DisplayPort connector • VGA connector • DVI connector (use with an HDMI/DisplayPort/VGA to DVI adapter) NOTE: The HDMI to DVI adapter, DisplayPort to DVI adapter, or VGA to DVI adapter are each sold separately. To connect a display panel to your VivoMini: Connect a display cable either to the HDMI, DisplayPort or VGA port.
Connecting display via VGA port 16 VivoMini VC65 Series
Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your VivoMini. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your VivoMini: Connect the USB cable from your keyboard and mouse to any of the USB ports of your VivoMini.
Turn on your VivoMini Press the power button to turn on your VivoMini.
Turning your VivoMini off If your VivoMini is unresponsive, press and hold the power button for at least four (4) seconds until your VivoMini turns off. Putting your VivoMini to sleep To put your VivoMini on Sleep mode, press the Power button once. Entering the BIOS Setup BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the VivoMini. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance.
Quickly enter the BIOS To quickly enter the BIOS: • Press the power button for at least four (4) seconds to shut down your VivoMini, then press the power button again to turn your VivoMini back on, then press or during POST. • When your PC is off, disconnect the power cord from your VivoMini’s power connector. Reconnect the power cable and press the power button to turn on your VivoMini. Press or during POST.
Upgrading your VivoMini 3
Installing 2.5” hard disk drive / solid state drive To install or upgrade the hard disk drives / solid state drives: 22 1. Turn off your VivoMini then disconnect all cables and peripherals. 2. Place the VivoMini on a flat stable surface, with its top side facing up. 3. Remove the screw from the top cover lock latch and push the latch down (A and B), then slide the top cover towards the rear of your VivoMini (C) until it is detached from the chassis. 4.
5. Remove four (4) screws from the HDD/SSD bracket. HDD1R HDD1L 6. (optional) To upgrade your HDD/SDD, first remove the four (4) screws on the bracket, then remove the bracket.
7. To install a new HDD/SSD, secure the HDD/SSD to the bracket using four (4) screws. NOTE: • E nsure to remove the holder from the bracket when installing an HDD/SDD to the HDD1R bracket. • T he availablility of the holder may vary depending on the model type, country, or region. 8. Connect the cable to the HDD1L, HDD1R and PWR1 connectors in your VivoMini.
9. Connect the cable to the HDD/SSD, then align the bracket to the HDD/SSD compartment of your VivoMini and secure the bracket with the screws previously removed. HDD1R HDD1L NOTE: Ensure to organize the cables to prevent any damage to your VivoMini and to ensure the top cover can be replaced successfully.
10. Replace the top cover (A) your VivoMini and slide it towards the front of the VivoMini to re-attach (B), then push the latch up and secure it using a screw (C and D).
Upgrading memory modules Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2GB, 4GB, or 8GB unbuffered non-ECC 1.35 V DDR3L 204-pin SO-DIMMs for a maximum of 16GB memory. IMPORTANT! Refer to http://www.asus.com for the list of compatible DIMMs. You can only install 1.35 V DDR3L SO-DIMM to the VivoMini’s DIMM slots. To install or upgrade the memory modules: 1. Follow steps 1-4 under the Installing 2.
3. Pry the SO-DIMM slot cover open, then set it aside. NOTE: If you want to remove the SO-DIMM slot cover, use a flathead screwdriver.
4. Align and insert the memory module into the slot (A) and press it down (B) until it is securely seated in place. Repeat the same steps to install the other memory module. IMPORTANT! Always install into the lower slot first. 5. Replace the SO-DIMM slot cover.
6. Align the HDD1L bracket and secure it using the screws removed previously. HDD1R HDD1L NOTE: Ensure to organize the cables to prevent any damage to your VivoMini and to ensure the top cover can be replaced successfully. 7. 30 Follow step 10 under the Installing 2.5” hard disk drive / solid state drive section to replace the top cover of your VivoMini.
Appendix
Safety information Your VivoMini is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation.
Lithium-Metal Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users DO NOT throw the VivoMini in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Regulatory notices REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.5 MHz NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr) NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
CE Mark Warning CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Rd., Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 http://www.asus.com +86-21-3842-9911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://usa.asus.
VivoMini VC65 Series 41 Declaración de conformidad EU GERMANY Country: ALEMANIA País: Ver. 151216 HARKORT STR. 21-23, 40880 RATINGEN Address, City: HARKORT STR. 21-23, 40880 RATINGEN Dirección, ciudad: VC65R , VC65 Nombre del modelo : 2015 Año de inicio del establecimiento de la marca CE Fecha corregida de declaración CEO 28/12/2015 Fecha original de declaración 09/12/2012 Taipei, Taiwan Lugar de emisión (marca de conformidad EU) Regulation (EC) No. 278/2009 Regulation (EU) No.
VivoMini VC65 Series 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH Strada HARKORT Nr 21-23, RATINGEN 40880 Germania Reprezentant autorizat în Europa: Adresă, Oraș: Țară: VC65R , VC65 Nume model: Ver. 151216 2015 Poziția Anul aplicării însemnului CE Data declarației revizuite 28/12/2015 Data declarației inițiale 09/12/2012 Taipei, Taiwan Locul emiterii (Însemnul de conformitate EU) Regulation (EC) No. 278/2009 Regulation (EU) No.
VivoMini VC65 Series 43 ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Authorized representative in Europe: Address, City: Country: VivoMini VC65R , VC65 Model name : 2015 Position Ver. 151216 Year to begin affixing CE marking Corrected Declaration Date 28/12/2015 Original Declaration Date 09/12/2012 Taipei, Taiwan Place of issue (EU conformity marking) Regulation (EC) No. 278/2009 Regulation (EU) No. 617/2013 EN 60065:2002 / A12: 2011 EN 301 489-1 V1.9.
VivoMini VC65 Series EU Declaração de Conformidade 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Morada: Representante autorizado na Europa: Morada, Cidade: País: VC65R , VC65 Modelo : HARKORT STR. 21-23, 40880 RATINGEN ALEMANIA Nombre del modelo : Ano para começar a aposição da marca CE 2015 2015 Ver.
VivoMini VC65 Series 45 HARKORT STR. 21-23, 40880 RATINGEN ALMANYA Adres, Şehir: Ülke: VC65R , VC65 Model adı : 2015 Pozisyon CE İşaretinin Eklendiği Yıl Düzeltilmiş Deklerasyon Tarihi 28/12/2015 Orjinal Deklerasyon Tarihi 09/12/2012 Taipei, Taiwan Sürüm yeri (EU uygunluk işareti) Regulation (EC) No. 278/2009 Regulation (EU) No. 617/2013 EN 60065:2002 / A12: 2011 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : VivoMini Model Number : VC65R , VC65 Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
