VivoMini UN65 Series User Manual
E13167 Revised Edition V3 June 2017 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual.............................................................................................. 4 Conventions used in this manual................................................................ 4 Typography.......................................................................................................... 4 Package contents................................................................................................ 5 Getting to know your VivoMini Features.................
About this manual This manual provides information about the hardware and software features of your PC, organized through the following chapters: Chapter 1: Getting to know your VivoMini This chapter details the hardware components of your VivoMini. Chapter 2: Using your VivoMini This chapter provides you with information on using your VivoMini. Chapter 3: Memory upgrade This chapter provides you with information on how to install new memory modules to your VivoMini.
Package contents Your VivoMini package contains the following items: Driver DVD** VivoMini Power cable* Technical documentations AC power adapter* DisplayPort to VGA adapter** NOTE: • *Actual product specifications and package contents may vary depending on the model type, country, or region. • **The availability and quantity of these items vary with your VivoMini package.
VivoMini UN Series
1 Getting to know your VivoMini
Features Front panel ASUS VivoMini Drive activity indicator This indicator lights up when your VivoMini is accessing the internal storage drive. Power button The power button allows you to turn the VivoMini on or off. You can also press the power button once to put your VivoMini to sleep mode.
Left panel Kensington® security slot The Kensington® security slot allows you to secure your VivoMini using Kensington® compatible security products. NOTE: The position for this slot may vary per model. Memory card slot The built-in memory card reader enables your VivoMini to read and write data to and from MMC/SD cards. USB 3.0 ports The USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate of up to 5 Gbit/s and is backward compatible to USB 2.0.
Rear panel Air vents The air vents allow warm air to exit your VivoMini chassis. NOTE: The air vents found on the bottom side of your VivoMini allow cool air to enter your device. It is recommended that you place your VivoMini on a flat stable surface for optimum air ventilation. IMPORTANT! For optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions. Power input (DC 19V) The supplied power adapter converts AC power to DC power for use with this jack.
HDMI port The HDMI (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow viewing on a larger external display. DisplayPort The DisplayPort sends high-performance digital output from your VivoMini to a display device such as an LCD TV or HD monitor. USB 3.0 port The USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate up to 5 Gbit/s and is backward compatible to USB 2.0.
VivoMini UN Series
Using your VivoMini 2
Getting started Connecting the AC power adapter To connect the AC power adapter to your VivoMini: A. Connect the AC power cord to the AC/DC adapter. B. Plug the AC power cord into a 100 V~240 V power source. C. Connect the DC power connector into your VivoMini’s power (DC) input port. NOTE: The power adapter may vary in appearance depending on the model or region.
IMPORTANT! • We strongly recommend that you use only the AC power adapter and cable that came with your VivoMini. • We strongly recommend that you use a grounded wall socket while using your VivoMini. • The socket outlet must be easily accessible and near your VivoMini. • To disconnect your VivoMini from its main power supply, unplug your VivoMini from the power socket.
Connecting a display panel You can connect a display panel or projector to your VivoMini that has the following connectors: • HDMI connector • DisplayPort connector • VGA connector (use with a DisplayPort to VGA adapter or HDMI to VGA adapter) • DVI connector (use with a DisplayPort to DVI adapter or HDMI to DVI adapter) NOTE: The DisplayPort to DVI adapter, HDMI to DVI adapter, DisplayPort to VGA adapter, or HDMI to VGA adapter are each sold separately.
Connecting USB keyboard or mouse You can connect generally any USB keyboard and mouse to your VivoMini. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your VivoMini: Connect the USB cable from your keyboard and mouse to any of the USB ports of your VivoMini. Turning on your VivoMini Press the power button to turn on your VivoMini.
Turning off your VivoMini If your VivoMini is unresponsive, press and hold the power button for at least four (4) seconds until your VivoMini turns off. Putting your VivoMini to sleep To put your VivoMini on Sleep mode, press the Power button once. Entering the BIOS Setup BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the VivoMini. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance.
Memory upgrade 3
Upgrading memory modules Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-ECC 1.35 V DDR3L 204-pin SO-DIMMs for a maximum of 16 GB memory. IMPORTANT! • It is recommended that you replace the memory modules under professional supervision. Visit an ASUS service center for further assistance. • Refer to http://www.asus.com for the list of compatible DIMMs. You can only install 1.35 V DDR3L SO-DIMM to the VivoMini’s DIMM slots.
3. Using a flat-head screwdriver or straightened paper clip, remove the rubber feet from the bottom side then set them aside. IMPORTANT! Take note of the orientation of the holed rubber foot on the cover, and the number printed under each rubber foot. These indicate the sequence you must follow when removing the rubber foot from its slot. Refer to the following illustration for details.
4. Remove the four screws securing the cover. 5. Get one screw from the ones you previously removed then place it into the hole. Leave a portion of the screw head that would be enough for you to hold.
6. Hold the screw then gently pull out the cover from the bottom side of the VivoMini. Use your other free hand to hold the VivoMini in place.
7. Align and insert the memory module into the slot (A) and press it down (B) until it is securely seated in place. Repeat the same steps to install the other memory module. IMPORTANT! Always install into the lower slot first. 8.
9. Reattach the screws to secure the cover back on the bottom side of the main box. 10. Replace the rubber feet back on each screw hole. IMPORTANT! Take note of the orientation of the holed rubber foot on the cover, and the number printed under each rubber foot. These indicate the sequence you must follow when replacing the rubber foot back into each slot. Refer to the following illustration for details.
VivoMini UN Series
Appendix VivoMini UN Series 27
Safety information Your VivoMini is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • • 28 Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation.
Care during use • • • • Do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug the power cord from the power outlets before cleaning the system. If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. – The power cord or plug is damaged.
Regulatory notices REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This Class B digital apparatus complies with Canadian ICES-003, RSS210, and CAN ICES-3(B)/NMB-3(B). This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Regional notice for California WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Rd., Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 http://www.asus.com +86-21-3842-9911 +86-21-5866-8722, ext. 9101# http://qr.asus.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Asus Computer International Responsible Party Name: 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : VivoMini Model Number : UN65 Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Asus Computer International Responsible Party Name: 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : VivoMini Model Number : UN65H Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
