E9224 Revised Edition 3 April 2014 Notebook PC E-Manual T300L Series
COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents About this manual......................................................................................................7 Conventions used in this manual.............................................................................. 8 Icons..................................................................................................................................... 8 Typography..............................................................................................................
Using the keyboard....................................................................................................46 Function keys.................................................................................................................... 46 Function keys for apps................................................................................................... 47 Windows®8 keys..............................................................................................................
Chapter 4: Power-on Self Test (POST) The Power-on Self Test (POST)...............................................................................80 Using POST to access BIOS and Troubleshoot...................................................... 80 BIOS.................................................................................................................................80 Accessing BIOS ................................................................................................................
FCC Radio Frequency (RF) Exposure Caution Statement.................................. 120 Declaration of Conformity (R&TTE directive 1999/5/EC)................................... 121 CE Marking......................................................................................................................... 121 IC Radiation Exposure Statement for Canada....................................................... 122 Déclaration d’Industrie Canada relative à l’exposition aux ondes radio ....
About this manual This manual provides information about the hardware and software features of your Notebook PC, organized through the following chapters: Chapter 1: Hardware Setup This chapter details the hardware components of your Notebook PC. Chapter 2: Using your Notebook PC This chapter shows you how to use the different parts of your Notebook PC. Chapter 3: Working with Windows® 8 This chapter provides an overview of using Windows® 8 in your Notebook PC.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing tasks and prevent damage to your Notebook PC's data and components.
Safety precautions Using your Notebook PC This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F). Refer to the rating label on the bottom of your Notebook PC and ensure that your power adapter complies with this rating. Do not leave your Notebook PC on your lap or near any part of your body to prevent discomfort or injury from heat exposure. Do not use damaged power cords, accessories, and other peripherals with your Notebook PC.
Caring for your Notebook PC Disconnect the AC power and remove the battery pack (if applicable) before cleaning your Notebook PC. Use a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water. Remove any extra moisture from your Notebook PC using a dry cloth. Do not use strong solvents such as thinners, benzene, or other chemicals on or near your Notebook PC. Do not place objects on top of your Notebook PC.
Proper disposal Do not throw your Notebook PC in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercurycontaining button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products. Do not throw the battery in municipal waste.
Notebook PC E-Manual
Chapter 1: Hardware Setup Notebook PC E-Manual 13
Top view NOTE: The keyboard's layout may vary per region or country.
Touch screen panel Your Notebook PC comes with a detachable touch screen panel that works like a tablet PC to suit your mobile needs. The touch screen panel is also equipped with its own features for work and play which can be accessed using touch screen panel gestures. NOTE: For more details on using the touch screen panel, refer to the Touch screen panel features and Using touch screen panel gestures sections in this manual.
Left side The following hardware features located on your touch screen panel and PC dock can be used while working on your Notebook PC. NOTE: The following hardware features on the touch screen panel also work when using the device as a tablet. USB 3.0 port This Universal Serial Bus 3.0 (USB 3.0) port provides a transfer rate of up to 5 Gbit/s and is backward compatible to USB 2.0.
Power (DC) input port Insert the bundled power adapter into this port to charge the battery pack and supply power to your Notebook PC. WARNING! The adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source. IMPORTANT! Use only the bundled power adapter to charge the battery pack and supply power to your Notebook PC.
Touch screen panel LED color table Color Status Solid White The touch screen panel is plugged to a power source, charging its battery, and the battery power is between 95% and 100%. Solid Orange The touch screen panel is connected to the PC dock, charging its battery, and the touch screen panel’s battery power is less than 30%. NOTE: This charging process is automatically enabled even while your system is on sleep mode or turned off.
Right side The following hardware features located on your touch screen panel can be used while working on your Notebook PC. These features also work when the touch screen panel is used as a tablet device. Audio speakers This touch screen panel uses SonicMaster technology to provide hi-fi sound quality, with richer bass sounds, straight from the built-in audio speakers.
Front side The following hardware features located on your touch screen panel can be used while working on your Notebook PC. These features also work when the touch screen panel is used as a tablet device. Power button Press the power button to turn your touch screen panel on or off. You can also use the power button to put your Notebook PC to sleep or hibernate mode and wake it up from sleep or hibernate mode.
Touch screen panel Top and back view NOTE: The keyboard's layout may vary per region or country.
Front camera The built-in front camera allows you to take pictures or record videos using your Notebook PC. Camera indicator The camera indicator lights up when the built-in camera is in use. Ambient light sensor The ambient light sensor detects the amount of ambient light in your environment. It allows the system to automatically adjust the brightness of the display depending on the ambient light condition.
Bottom side PC dock slot This slot is magnetic and aligns conveniently with the magnetic PC dock tab to securely attach the touch screen panel to its PC dock. WARNING! • The PC dock slot is magnetic Please keep out of children’s reach. • Magnetic fields generated by mobile devices may damage data on magnetic storage media, such as credit cards, computer discs or tapes. Do not place your device next to such media.
PC dock Top view NOTE: The keyboard's layout may vary per region or country. e 1 2 3 - 0 Power indicator This indicator lights up when the PC dock is turned on. NOTE: For more details, refer to the PC dock LED color table section in this manual.
PC dock LED color table Color Status Solid White The PC dock is currently paired with the touch screen panel and can be used via wireless connection. Solid Orange The PC dock is currently connected to a power source and charging its battery. Blinking white The PC dock is currently pairing with the touch screen panel. Blinking Orange The PC dock’s power is less than 5%. Lights off The PC dock is running out of battery power and needs to connect to a power source.
PC dock hinge This hinge supports the touch screen panel while it is connected to the PC dock. It also holds the touch screen panel in place while you adjust it into different viewing angles. ASUS Console key Press this button to launch the ASUS Console app launcher. Numeric keypad on keyboard Using the function key, you can toggle between using these keys according to their original function or using them as a numeric keypad.
Rear view PC dock tab The magnetic PC dock tab securely attaches the touch screen panel to the PC dock. Attach the touch screen panel to the PC dock by aligning the PC dock slot on top of this tab. Once attached, you can adjust the touch screen panel according to your preferred viewing angle. WARNING! • The PC dock tab is magnetic. Please keep out of children’s reach. • Magnetic fields generated by mobile devices may damage data on magnetic storage media, such as credit cards, computer discs or tapes.
Docking the touch screen panel Align the touch screen panel on top of the PC dock tab as illustrated below. NOTE: The PC dock slot and the PC dock tab have magnetic parts. The pull between these magnets help align the touch screen panel to securely connect it with the PC dock.
Undocking the touch screen panel Press the release button on the PC dock to securely detach the touch screen panel from the PC dock tab, then gently pull out the touch screen panel.
Notebook PC E-Manual
Chapter 2: Using your Notebook PC Notebook PC E-Manual 31
Getting started Dock the touch screen panel on the PC dock.
Charge your Notebook PC. Connect both your touch screen panel and PC dock to a power source using the following steps: A. Plug the AC power adapter into a 100V~240V power source. B. Connect the DC power connector into your touch screen panel’s power (DC) input. C. Connect the USB to micro USB cable to your touch screen panel and PC dock. Charge the Notebook PC for 8 hours before using it in battery mode for the first time.
IMPORTANT! • Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU. • Ensure that your Notebook PC is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your Notebook PC on power adapter mode.
WARNING! Read the following precautions for your Notebook PC’s battery. • Only ASUS-authorized technicians should remove the battery inside the device. • The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. • Follow the warning labels for your personal safety. • Risk of explosion if battery is replaced by an incorrect type. • Do not dispose of in fire. • Never attempt to short-circuit your Notebook PC’s battery.
Turn on your Notebook PC. A. Press the power button on your touch screen panel. B. Move your PC dock’s power switch to the right.
Gestures for the touch screen panel and touchpad Gestures allow you to launch programs and access the settings of your Notebook PC. Refer to the following illustrations when using hand gestures on your touch screen panel and touchpad. Using the touch screen panel Left edge swipe Right edge swipe Swipe from the left edge of the screen to shuffle your running apps. Swipe from the right edge of the screen to launch the Charms bar.
Zoom out Zoom in Bring together your two fingers on the touch panel. Spread apart your two fingers on the touch panel. Top edge swipe Finger slide • In the Start screen, swipe from the top edge of the screen to view the All Apps bar. Slide your finger to scroll up and down and slide your finger to pan the screen left or right. • In a running app, swipe from the top edge of the screen to view its menu.
Using the touchpad Moving the pointer You can tap or click anywhere on the touchpad to activate its pointer, then slide your finger on the touchpad to move the pointer onscreen.
One-finger gestures Tap/Double tap • In the Start screen, tap an app to launch it. • In Desktop mode, double-tap an application to launch it. Drag and drop Double-tap an item, then slide the same finger without lifting it off the touchpad. To drop the item to its new location, lift your finger from the touchpad.
Left-click Right-click • In the Start screen, click an app to launch it. • • In Desktop mode, doubleclick an application to launch it. In the Start screen, click an app to select it and launch the settings bar. You can also press this button to launch the All Apps bar. • In Desktop mode, use this button to open the rightclick menu. NOTE: The areas inside the dotted line represent the locations of the left mouse button and the right mouse button on the touchpad.
Top edge swipe • In the Start screen, swipe from the top edge to launch the All Apps bar. • In a running app, swipe from the top edge to view its menu. Left edge swipe Right edge swipe Swipe from the left edge to shuffle Swipe the right edge to launch your running apps. the Charms bar.
Two-finger gestures Tap Rotate Tap two fingers on the touchpad to simulate the right-click function. To rotate an image, place two fingers on the touchpad then turn one finger clockwise or counterclockwise while the other stays still. Two-finger scroll (up/down) Two-finger scroll (left/right) Slide two fingers to scroll up or down. Slide two fingers to scroll left or right.
Zoom out Zoom in Bring together your two fingers on Spread apart your two fingers on the touchpad. the touchpad. Drag and drop Select an item then press and hold the left button. Using your other finger, slide down the touchpad to drag and drop the item to a new location.
Three-finger gestures Swipe up Swipe down Swipe three fingers upward to show all running applications. Swipe three fingers downward to show the Desktop mode.
Using the keyboard Function keys The function keys on your Notebook PC’s keyboard can trigger the following commands: Puts the Notebook PC into Sleep mode Turns Airplane mode on or off NOTE: When enabled, the Airplane mode disables all wireless connectivity. Decreases display brightness Increases display brightness Turns the display panel off Activates the second screen NOTE: Ensure that the second display is connected to your Notebook PC.
Turns the speaker volume down Turns the speaker volume up Function keys for apps Your Notebook PC also comes with a special set of function keys that can be used to launch some featured apps. Toggles the ASUS Splendid Video Enhancement Technology app to switch between these display color enhancement modes: Gamma Correction, Vivid Mode, Theater Mode, Soft Mode, My Profile, and Normal.
Windows®8 keys There are two special Windows® keys on your Notebook PC’s keyboard used as below: Press this key to go back to the Start screen. If you are already in the Start screen, press this key to go back to the last app you opened. Press this key to simulate the right-click functions. Multimedia control keys* The multimedia control keys allow you to control multimedia files, such as audios and videos, when played in your Notebook PC.
Numeric keypad on keyboard* This Notebook PC comes with 15 select keys that you can also use for numeric input. The numeric keypad on your Notebook PC are 15 select keys that are originally part of your standard QWERTY keyboard. Using the function key, these select keys can become a numeric keypad on your Notebook PC. Press to toggle between using these keys as number keys or as their original keyboard function.
Notebook PC E-Manual
Chapter 3: Working with Windows® 8 Notebook PC E-Manual 51
Starting for the first time When you start your computer for the first time, a series of screens appear to guide you while configuring the basic settings of your Windows® 8 operating system. To start your Notebook PC for the first time: 1. Press the power button on your Notebook PC. Wait for a few minutes until the setup screen appears. 2. From the setup screen, pick a language to use on your Notebook PC. 3. Carefully read the License Terms. Tick I accept the terms for using Windows then click Accept.
Windows® UI Windows® 8 comes with a tile-based user interface (UI) which allows you to organize and easily access Windows® apps from the Start screen. It also includes the following features that you can use while working on your Notebook PC. Start screen The Start screen appears after successfully signing in to your user account. It helps organize all the applications you need in just one place.
Hotspots Onscreen hotspots allow you to launch programs and access the settings of your Notebook PC. The functions in these hotspots can be activated using the touchpad.
Hotspot Action upper left corner Hover your mouse pointer on the upper left corner then tap on the recent app’s thumbnail to revert back to that running app. If you launched more than one app, slide down to show all running apps. lower left corner From a running app screen: Hover your mouse pointer on the lower left corner then tap on the Start screen’s thumbnail to go back to the Start screen. NOTE: You can also press the Windows key on your keyboard to go back to the Start screen.
Hotspot Action top side Hover your mouse pointer on the top side until it changes to a hand icon. Drag then drop the app to a new location. NOTE: This hotspot function only works on a running app or when you want to use the Snap feature. For more details, refer to the Snap feature under Working with Windows® apps. upper or lower right corner 56 Hover your mouse pointer on the upper or lower right corner to launch the Charms bar.
Working with Windows® apps Use your Notebook PC’s touchscreen, touchpad, or keyboard to launch, customize, and close apps. Launching apps Tap an app to launch it. Position your mouse pointer over the app then left-click or tap once to launch it. Press twice then use the arrow keys to browse through the apps. Press to launch an app.
Resizing apps 1. Swipe down the app tile to select and launch the settings bar. 2. Tap to reduce or to enlarge the app tile. Right-click on the app to activate its settings bar then tap or . Unpinning apps 1. Swipe down the app tile to select and launch the settings bar. 2. Tap to unpin an app. Right-click on the app to activate the settings bar then tap 58 .
Closing apps Tap and hold the top side of the running app then drag it down to the bottom of the screen to close it. 1. Move your mouse pointer on the top side of the launched app then wait for the pointer to change to a hand icon. 2. Drag then drop the app to the bottom of the screen to close it. From the running app’s screen, press Notebook PC E-Manual .
Accessing the Apps screen Aside from the apps already pinned on your Start screen, you can also open other applications through the Apps screen.
Launching the Apps screen Launch the Apps screen using your Notebook PC's touch screen panel, touchpad, or keyboard. 1. Swipe from the top or bottom edge of the screen to launch the All Apps bar. 2. Tap to show all installed apps in your Notebook PC. Swipe from the top edge to launch the All Apps bar. From the Start screen, press All Apps icon Notebook PC E-Manual then press to select the .
Pinning more apps on the Start screen You can pin more apps on the Start screen using your touch screen panel or touchpad. 1. In the Apps screen, swipe down the app to select and launch the settings bar. 2. Tap to pin the selected app on the Start screen. 62 1. Position the mouse pointer over the app you want to pin on the Start screen. 2. Right-click on the app to activate its settings. 3. Tap on the icon.
Charms bar The charms bar is a toolbar that can be triggered on the right side of your screen. It consists of several charms that allow you to share applications and provide quick access for customizing the settings of your Notebook PC.
Launching the charms bar NOTE: When called out, the charms bar initially appears as a set of white icons. The image above shows how the charms bar looks like once activated. Use your Notebook PC’s touch screen panel, touchpad, or keyboard to launch the charms bar. Swipe from the right edge of the screen to launch the charms bar. Move your mouse pointer on the upper or lower right corner of the screen. Press 64 .
Inside the charms bar Search This charm allows you to look for files, applications, or programs in your Notebook PC. Share This charm allows you to share applications via social networking sites or email. Start This charm reverts the display back to the Start screen. From the Start screen, you can also use this to revert back to a recently opened app. Devices This charm allows you to access and share files with the devices attached to your Notebook PC such as an external display or printer.
Snap feature The Snap feature displays two apps side-by-side, allowing you to work or switch between apps. IMPORTANT! Ensure that your Notebook PC’s screen resolution is set to 1366 x 768 pixels or higher before using the Snap feature.
Using Snap Use your Notebook PC’s touch screen panel, touchpad or keyboard to activate and use Snap. 1. Launch the app you wish to snap. 2. Tap and hold the app’s topmost part then drag it to the left or right side of the screen until the snap bar appears. 3. Launch another app. 1. Launch the app you wish to snap. 2. Hover the mouse point on the top side of your screen. 3. Once the pointer changes to a hand icon, drag then drop the app to the left or right side of the display panel. 4.
Other keyboard shortcuts Using the keyboard, you can also use the following shortcuts to help you launch applications and navigate Windows® 8.
Opens the Second screen pane Opens the Apps search pane Opens the Run window Opens Ease of Access Center Opens the Settings charm Opens a menu box of Windows® tools Launches the magnifier icon and zooms in your screen Zooms out your screen Opens the Narrator Settings Notebook PC E-Manual 69
Connecting to wireless networks Wi-Fi Access emails, surf the Internet, and share applications via social networking sites using your Notebook PC’s Wi-Fi connection. IMPORTANT! The Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Wi-Fi connection of your Notebook PC. Enabling Wi-Fi Activate Wi-Fi in your Notebook PC using the following steps on your touch screen panel or touchpad. 1. Launch the Charms bar. 2. Tap/click 3.
4. Tap/click Connect to start the network connection. NOTE: You may be prompted to enter a security key to activate the Wi-Fi connection. or 5. If you want to enable sharing between your Notebook PC and other wireless-enabled systems, tap Yes, turn on sharing and connect to devices. Tap*/click No, don't turn on sharing or connect to devices if you do not want to enable the sharing function.
Bluetooth Use Bluetooth to facilitate wireless data transfers with other Bluetoothenabled devices. IMPORTANT! The Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Bluetooth connection of your Notebook PC. Pairing with other Bluetooth-enabled devices You need to pair your Notebook PC with other Bluetooth-enabled devices to enable data transfers. To do this, use your touch screen panel or touchpad as follows: 1. Launch the Charms bar. 2.
4. or Select a device from the list. Compare the passcode on your Notebook PC with the passcode sent to your chosen device. If they are the same, tap/click Yes to successfully pair your Notebook PC with the device. NOTE: For some bluetooth-enabled devices, you may be prompted to key in the passcode of your Notebook PC.
Airplane mode The Airplane mode disables wireless communication, allowing you to use your Notebook PC safely while in-flight. IMPORTANT! When Airplane mode is enabled, your PD dock cannot function as a wireless input device for your touch screen panel. On Airplane mode, you can only use the PC dock as input device for the touch screen panel if both devices are connected. Turning Airplane mode on 1. Launch the Charms bar. 2. Tap/click 3. Move the slider to the right to turn the Airplane mode on.
Turning Airplane mode off or 1. Launch the Charms bar. 2. Tap/click 3. Move the slider to the left to turn the Airplane mode off. Press and tap/click . . NOTE: Contact your airline provider to learn about related inflight services that can be used and restrictions that must be followed when using your Notebook PC in-flight.
Connecting to wired networks You can also connect to wired networks, such as local area networks and broadband Internet connection, using your Notebook PC’s LAN port. NOTE: Contact your Internet Service Provider (ISP) for details or your network administrator for assistance in setting up your Internet connection. To configure your settings, refer to the following procedures.
Click Obtain an IP address automatically then tap OK. 6. NOTE: Proceed to the next steps if you are using PPPoE connection. 7. Return to the Network and Sharing Center window then tap Set up a new connection or network. 8. Select Connect to the Internet then tap Next. 9. Click Broadband (PPPoE). 10. Type your User name, Password, and Connection name then tap Connect. 11. Click Close to finish the configuration. 12. Tap on the taskbar then tap the connection you just created. 13.
Turning your Notebook PC off You can turn off your Notebook PC by doing either of the following procedures: • Tap/click tap/click or from the Charms bar then > Shut down to do a normal shutdown. • From the log-in screen, tap/click > Shut down. • You can also shut down your Notebook PC using Desktop mode. To do this, launch the desktop then press alt + f4 to launch the Shut Down window. Select Shut Down from the drop-down list then select OK.
Chapter 4: Power-on Self Test (POST) Notebook PC E-Manual 79
The Power-on Self Test (POST) The Power-on Self Test (POST) is a series of software-controlled diagnostic tests that run when you turn on or restart your Notebook PC. The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture. Using POST to access BIOS and Troubleshoot During POST, you can access the BIOS settings or troubleshooting options of your Notebook PC. You may refer to the following information for more details.
Accessing BIOS 1. During POST, press and hold the volume down button until the following screen appears: 2. Once the Select Page appears, you may release the volume down button then select SETUPMENU to enter BIOS. IMPORTANT! If you fail to select SETUPMENU before the counter turns from 9 to 0, your Notebook PC will proceed to launching Windows® 8.
Using BIOS The BIOS feature of this Notebook PC is touch-enabled. You may access the BIOS settings and configure it using your touch screen panel. You may also navigate its tabs using the arrow keys and select function keys on your Notebook PC’s keyboard. Your Notebook PC includes the following BIOS menu options: • Main • Advanced • Boot • Security • Exit The details on how to configure your BIOS, using these menu options, are shown in the following pages.
NOTE: The BIOS screens in this section are for reference only. The actual screens may differ by model and territory. Main The MAIN menu screen appears when you enter BIOS. It provides an overview of the basic system information and allows you to set the system date and time. BIOS Information BIOS Vendor Version VBIOS Version EC Version Processor Information Memory Information Total Memory American Megatrends 205 2175.I15T300.005 t31S090001 Intel(R) Core(TM) i34010U CPU @ 1.
Boot This menu allows you to configure and enable or disable the following boot options: • Fast Boot • Launch CSM • Boot Option Priorities • Add New Boot Option • Delete Boot Option Boot Configuration Fast Boot Launch CSM Enabled Enabled Disabled Boot Option Priorities Boot Option #1 Windows Bo Add New Boot Option Delete Boot Option This option controls if CSM will be launched. Refer to the following pages for details on how to configure these boot options.
Fast Boot Using Fast Boot allows you to switch between normal or accelerated boot speeds for your Notebook PC. To configure your Fast Boot settings: Select the drop-down arrow in the box beside Fast Boot then select Enabled or Disabled. Boot Option Priority Using Boot Option Priority allows you to specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
Add New Boot Option Using Add New Boot Option allows you to add a new EFI boot option into the current boot order. Add New Boot Option Add boot option Path for boot option Boot option File Path Create Specify name for new boot option To add a new boot option: 86 1. On the Boot screen, select Add New Boot Option. 2. Select Add boot option and input your preferred name for the new boot option. 3.
Delete Boot Option Using Delete Boot Option allows you to delete an EFI boot option from the boot order. Delete Boot Option Delete boot option Select one Remove an EFI boot option from the boot order To delete a boot option: 1. On the Boot screen, select Delete Boot Option. 2. Select the drop-down arrow to show the list of all current boot options then choose the boot option to delete.
Security This menu allows you to control access to your Notebook PC’s disk drive, I/O ports, BIOS, and operating system. It provides you additional security measures to set passwords, enable/disable, and lock/unlock features under the following items: • User and Administrator Password • HDD Password • I/O Interface Security • Secure Boot menu Password Description If ONLY the Administrator’s password is set, this only limits access to Setup and is only asked for when entering Setup.
User and Administrator Password Using the Security menu, you can set up a user password and administrator password for your Notebook PC that works as below: • If you install a User Password, you will be prompted to input this during POST. • If you install an Administrator Password, you will be prompted to input this before entering BIOS.
To set the user or administrator password: 1. On the Security screen, select Administrator Password or User Password. 2. Type in a password then select OK. NOTE: You may also use the onscreen keyboard and input your password using the touch screen panel. Create New Password Ok 90 Cancel 1 2 3 4 5 6 7 8 9 0 BKS ESC q w e r t y u i o p CAP a s d f g h j k l Alt !@ z x c v b n m ENTER 3. Re-type to confirm the password then select OK. 4.
To clear the user or administrator password: 1. On the Security screen, select Administrator Password or User Password. 2. Type in the current password then select OK. NOTE: You may also use the onscreen keyboard and input your password using the touch screen panel. Create New Password Ok Cancel 1 2 3 4 5 6 7 8 9 0 BKS ESC q w e r t y u i o p CAP a s d f g h j k l Alt !@ z x c v b n m ENTER 3. Leave the Confirm New Password field blank then select OK. 4.
HDD Password In the Security menu, you can use Set Master Password to set up a password-enabled access to your hard disk drive. In Setup the User will have Administrator rights. Administrator Password Status User Password Status Administrator Password User Password NOT INSTALLED NOT INSTALLED HDD Password Status: Set Master Password Set User Password NOT INSTALLED I/O Interface Security Secure Boot menu Set HDD Master Password.
To set the HDD password: 1. On the Security screen, select Set Master Password. 2. Type in a password then select OK. NOTE: You may also use the onscreen keyboard and input your password using the touch screen panel. Create New Password Ok Cancel 1 2 3 4 5 6 7 8 9 0 BKS ESC q w e r t y u i o p CAP a s d f g h j k l Alt !@ z x c v b n m ENTER 3. Re-type to confirm the password then select OK. 4. The next screen confirms that the password has been set.
I/O Interface Security In the Security menu, you can access I/O Interface Security to lock or unlock some interface functions of your Notebook PC. I/O Interface Security Wireless Network Interface HD AUDIO Interface USB Interface Security UnLock UnLock If Locked, Wireless Network will be disabled To lock an interface: 94 1. On the Security screen, select I/O Interface Security. 2. Select an interface you would like to lock then select Lock.
USB Interface Security Inside the I/O Interface Security menu, you can also access USB Interface Security to lock or unlock ports and devices. USB Interface Security External Ports BlueTooth CMOS Camera Card Reader UnLock UnLock UnLock UnLock If Locked, USB External Ports will be disabled To lock the USB interface: 1. On the Security screen, select I/O Interface Security > USB Interface Security. 2. Select an interface that you would like to lock then select Lock.
Advanced This menu provides advanced options for experienced end-users to configure the BIOS settings. NOTE: The items included in your Advanced menu may vary depending on model. WARNING: Using inappropriate BIOS settings may result to system instability or boot failure. We strongly recommend that you change these BIOS settings only with the help of a trained service personnel.
Exit The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Save Changes and Exit Discard Changes and Exit Save Options Save Changes Discard Chnages Restore Defaults Boot Override Windows Boot Manager (P2: KINGSTON RBU-SNS8100S364G1) Launch EFI Shell from filesystem device Exit system setup after saving the changes.
Updating the BIOS 1. Verify the Notebook PC’s exact model then download the latest BIOS file for your model from the ASUS website. 2. Save a copy of the downloaded BIOS file to a flash disk drive. IMPORTANT! Ensure that the file is saved in the root directory of your flash disk drive. 3. Connect your flash disk drive to your Notebook PC. 4. Enter BIOS. NOTE: For details, refer to the Accessing BIOS section in this manual. 5. From the BIOS menu, Select Advanced > Start Easy Flash. 6.
Troubleshoot During POST, you can also access the following troubleshoot options from Windows® 8: • Refresh your PC • Reset your PC • Advanced options These options allow you to fix some system issues and help improve the performance of your Notebook PC. Accessing Troubleshoot 1. During POST, press and hold the volume down button until the following screen appears. 2. Once the Select Page appears, you may release volume down button then select RECOVERY to enter BIOS.
Refresh your PC Use Refresh your PC if you want to refresh your system without losing your current files and applications. To access this during POST: 1. Refer to steps 1 to 2 on page 99 under Accessing Troubleshoot during POST. 2. Wait for Windows® to load the Choose an option screen then tap Troubleshoot. 3. Tap Refresh your PC. 4. In the Refresh your PC screen, read the bullet points to learn more about using this option then tap Next. 5. Tap the account you would like to refresh. 6.
Reset your PC IMPORTANT! Back up all your data before performing this option. Use Reset your PC to restore your Notebook PC to its default settings. To access this during POST: 1. Refer to steps 1 to 2 on page 99 under Accessing Troubleshoot during POST. 2. Wait for Windows® to load the Choose an option screen then tap Troubleshoot. 3. Tap Reset your PC. 4. In the Reset your PC screen, read the bullet points to learn more about using this option then tap Next. 5.
Advanced options Use Advanced options to perform additional troubleshooting options in your Notebook PC. To access this during POST: 1. Refer to steps 1 to 2 on page 99 under Accessing Troubleshoot during POST. 2. Wait for Windows® to load the Choose an option screen then tap Troubleshoot. 3. Tap Advanced options. 4. In the Advanced options screen, select the troubleshooting option you wish to perform. 5. Follow the succeeding steps to complete the process.
4. In the Advanced options screen, select System Image Recovery. 5. Choose an account you would like to recover using a system image file. 6. Type your account password then tap Continue. 7. Select Use the latest available system image (recommended), then tap Next. You can also choose Select a system image if your system image is in an external device or DVD. 8. Follow the succeeding steps to complete the system image recovery procedure.
Notebook PC E-Manual
Tips and FAQs Notebook PC E-Manual 105
Useful tips for your Notebook PC To help you maximize the use of your Notebook PC, maintain its system performance, and ensure all your data are kept secured, here are some useful tips that you can follow: • Update Windows® periodically to ensure that your applications have the latest security settings. • Use ASUS Live Update to update ASUS-exclusive applications, drivers and utilities in your Notebook PC. Refer to the ASUS Tutor installed in your Notebook PC for more details.
Hardware FAQs 1. A black dot, or sometimes a colored dot, appears onscreen when I turn on the Notebook PC. What should I do? Although these dots normally appear onscreen, they will not affect your system. If the incident continues and subsequently affects system performance, consult an authorized ASUS service center. 2. My display panel has an uneven color and brightness.
4. 5. 6. My battery LED indicator does not light up. What’s wrong? • Check whether the power adapter or battery pack is attached correctly. You may also disconnect the power adapter or battery pack, wait for a minute, then reconnect them again to the power outlet and Notebook PC. • If the problem still exists, contact your local ASUS service center for assistance. Why is my touchpad not working? • Press to enable your touchpad.
8. Why does audio still come out from my Notebook PC’s audio speakers even if I already connected my headphone into the right jack port? Go to Control Panel > Hardware and Sound then access Audio Manager to configure the settings. 9. My Notebook PC cannot do keystrokes correctly because my cursor keeps on moving. What should I do? Make sure that nothing accidentally touches or presses on your touchpad while you type on the keyboard. You can also disable your touchpad by pressing 10. .
Software FAQs 1. When I turn on my Notebook PC, the power indicator lights up but not my drive activity indicator. System bootup does not happen as well. What can I do to fix this? You can try doing any of the following suggestions: 2. • Force shutdown your Notebook PC by pressing the power button for more than four (4) seconds. Check if the power adapter and battery pack are inserted correctly then turn on your Notebook PC.
4. My Notebook PC does not boot up. How can I fix this? You can try doing any of the following suggestions: 5. • Remove all connected devices to your Notebook PC then restart your system. • Refer to the Troubleshoot section in this manual. • If the problem still exists, contact your local ASUS service center for assistance. Why can’t my Notebook PC wake up from sleep or hibernate mode? • You need to press the power button to resume your last working state.
6. How can I boot to DOS using my USB drive or ODD? Refer to the following steps: a. During POST, press and hold the volume down button until the following screen appears. b. Once the Select Page appears, you may release volume down button then select SETUPMENU to enter BIOS. IMPORTANT! If you fail to select SETUPMENU before the counter turns from 9 to 0, your Notebook PC will proceed to launching Windows® 8. 112 c. Go to the Security menu then set Secure Boot Control to Disabled. d.
Appendices Notebook PC E-Manual 113
DVD-ROM Drive Information (on selected models) The DVD-ROM drive allows you to view and create your own CDs and DVDs. You can purchase an optional DVD viewer software to view DVD titles. Regional Playback Information Playback of DVD movie titles involves decoding MPEG2 video, digital AC3 audio and decryption of CSS protected content.
Region Definitions Region 1 Canada, US, US Territories Region 2 Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran, Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal, Saudi Arabia, Scotland, South Africa, Spain, Sweden, Switzerland, Syria, Turkey, UK, Greece, Former Yugoslav Republics, Slovakia Region 3 Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand, Vietnam Region 4 Australia, Caribbean (Except US Territories), Central America, Ne
Blu-ray ROM Drive Information (on selected models) The Blu-ray ROM Drive allows you to view high definition (HD) videos and other disc file formats such as DVDs and CDs. Region Definitions Region A North, Central and South American countries, and their territories; Taiwan, Hong Kong, Macao, Japan, Korea (South and North), South East Asian countries and their territories. Region B European, African, and South West Asian countries and their territories; Australia and New Zealand.
Overview On 4th August 1998 the European Council Decision regarding the CTR 21 has been published in the Official Journal of the EC. The CTR 21 applies to all non voice terminal equipment with DTMF-dialling which is intended to be connected to the analogue PSTN (Public Switched Telephone Network).
This table shows the countries currently under the CTR21 standard.
This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom.de/technologies/ctr_21. html 1 National requirements will apply only if the equipment may use pulse dialling (manufacturers may state in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superfluous). In The Netherlands additional testing is required for series connection and caller ID facilities.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING! The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
Declaration of Conformity (R&TTE directive 1999/5/EC) The following items were completed and are considered relevant and sufficient: • Essential requirements as in [Article 3] • Protection requirements for health and safety as in [Article 3.1a] • Testing for electric safety according to [EN 60950] • Protection requirements for electromagnetic compatibility in [Article 3.
IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Déclaration d’Industrie Canada relative à l’ exposition aux ondes radio Cet appareil est conforme aux limites d’exposition aux radiations d’Industrie Canada définies pour un environnement non-contrôlé. Pour maintenir la conformité avec les exigences d’exposition RF d’IC, veuillez éviter tout contact direct avec l’antenne pendant l’émission. Les utilisateurs finaux doivent suivre les instructions de fonctionnement spécifiques pour satisfaire la conformité aux expositions RF.
Wireless Operation Channel for Different Domains N. America 2.412-2.462 GHz Ch01 through CH11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13 France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) • 100mW for frequencies between 2446.5 MHz and 2483.
Departments in which the use of the 2400–2483.
UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFPA 70).
Power Safety Requirement Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2. TV Notices Note to CATV System Installer—Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.
Nordic Lithium Cautions (for lithium-ion batteries) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente.
Optical Drive Safety Information Laser Safety Information CD-ROM Drive Safety Warning CLASS 1 LASER PRODUCT WARNING! To prevent exposure to the optical drive’s laser, do not attempt to disassemble or repair the optical drive by yourself. For your safety, contact a professional technician for assistance. Service warning label WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
CTR 21 Approval (for Notebook PC with built-in Modem) Danish Dutch English Finnish French 130 Notebook PC E-Manual
German Greek Italian Portuguese Spanish Swedish Notebook PC E-Manual 131
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity.
Global Environmental Regulation Compliance and Declaration ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/english/Compliance.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
