RP-AC55 Wireless AC1200 Repeater Quick Start Guide U14322_RP-AC55_QSG_V3.
RP-AC55 Wireless AC1200 Repeater ENGLISH Package contents Quick Start Guide Warranty Card NOTE: If any of the items is damaged or missing, please contact your retailer. A quick look 1) Reset button 2) Power switch 3) WPS button 4) Power LED On: RP-AC55 is power on. Off: RP-AC55 is power off. 5) Existing network LED On: Connected to the router/AP. Off: Not connected to the router/AP. 6) Move closer Need to move RP-AC55 closer to the router/AP.
ENGLISH Setting up the Repeater Turning the Repeater on 1. Place your RP-AC55 near your Router/AP and plug it to a power outlet. Press the power switch to ON. 2. Wait until the power LED changes from red to solid blue, indicating that RP-AC55 is ready to connect to the existing network. Connecting to a network Select one of the following ways to connect the Repeater to a network. Method One: Using WPS (Wi-Fi Protected Setup) 1. Press the WPS button on the router/AP. 2.
ENGLISH 3. Follow the Quick Extender Setup steps to set up the Repeater: • Connect to a Wi-Fi network and when prompted, enter the security key. If your Wi-Fi network is hidden, click Manual setting. • Tick Same with Parent AP SSID/Password to copy the router/AP’s SSID and password for your extended network. You could also set a unique SSID and password for your extended network by typing in the text box. When done, click Apply.
ENGLISH Frequently Asked Questions Q1: What should I do if my router does not support WPS? • You can use Method Two to set up RP-AC55. Q2: W hy is it that the LED indicator for the current network does not light up after the Wi-Fi setup is complete? • You may have entered the wrong password for the router/AP. Please restart your RP-AC55, enter the correct password, and try to set up your RP-AC55 again. Q3: Why is it that I cannot see the login page after entering http://repeater.asus.
ENGLISH B. Set the TCP/IP settings to automatically obtain an IP address. 1. Click Start > Control Panel > Network and Internet > Network and Sharing Center > Manage network connections. 2. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties. 3. Tick Obtain an IP address automatically. 4. Click OK when done. Mac OS A. Disable the proxy server, if enabled. 1. From the menu bar, click Safari > Preferences... > Advanced tab. 2. Click Change Settings... in the Proxies field. 3.
ENGLISH B. Set the TCP/IP settings to automatically obtain an IP address. 1. Click the Apple icon > System Preferences > Network. 2. Select Ethernet and select Using DHCP in the Configure field. 3. Click Apply when done. 8 U14322_RP-AC55_QSG_V3.