First Edition May 2019 Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.......................................................................................................... iv Safety information........................................................................................ v Care & Cleaning........................................................................................... vi Takeback Services...................................................................................... vii Chapter 1: Product introduction 1.1 Welcome!.........
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
viii
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
Monitor introduction 1.3.1 Front view 6 1 2 3 4 5 1. ( 5-way) button • Turns on the OSD menu. Enacts the selected OSD menu item. • Increases/Decreases values or moves your selection up/down/left/right. • Turns on the OSD menu when the monitor enters standby mode or displays the “NO SIGNAL“ message. 2. button • Exits the OSD menu item. • Toggles the Key Lock function between on and off with a long press for 5 seconds.
• Turns on the OSD menu when the monitor enters standby mode or displays the “NO SIGNAL“ message. 5. Power button/power indicator • Turns the monitor on/off. • The color definition of the power indicator is as the below table. Status Description White ON Amber flashing Entering standby mode 6. Amber Standby mode/No signal OFF OFF Green Red HDR G-SYNC Ambient light sensor. 1.3.2 Back view 13 11 12 13 4 9 5 6 7 8 1. DC IN port. This port connects the power cord. 2. HDMI port.
10. Light In Motion. 11. Vent (air intake). Do not cover the ventilation slots on the monitor. Heat build-up can reduce the service life of your monitor and also be dangerous. 12. Control buttons. 13. Vent (heated air exhaust). Do not cover the ventilation slots on the monitor. Heat build-up can reduce the service life of your monitor and also be dangerous.
1.3.3 GamePlus function The GamePlus function provides a toolkit and creates a better gaming environment for users when playing different types of games. The crosshair overlay with 6 different crosshair options lets you choose the one that best suits the game you're playing. There's also an onscreen timer you can position on the left of the display so you can keep track of the elapsed gaming time; while the FPS (frames per second) counter lets you know how smooth the game is running.
1.3.4 Using the sound hotkey There are 2 audio paths, either from the USB cable or from the HDMI/DisplayPort cable. After pressing the sound hotkey, the sound settings for you to determine the audio path and to adjust the volume will appear. • • Audio Path: You can select between USB (Hi-Res support) or HDMI/DP path. * USB (Headset/Hi-Res Support): Supports high-resolution audio playback.
2.1 Assembling the monitor arm/base Do not remove the monitor from the packaging box before attaching the stand. To assemble the monitor base: 1. After opening the box, remove the foam cushions. (Figure 1) (Figure 1) 2. Insert the base into the arm, and attach the LED projection cover to the stand after removing the plastic cap. (Figure 2) 1 3 2 (Figure 2) To change the film on the LED projection cover, follow the illustration below.
3. Remove the tape that fastens the stand and place the monitor upright. (Figure 3) 4. Remove the cover from the monitor. (Figure 4) 2 1 (Figure 3) (Figure 4) Do not press on the screen when lifting the monitor. Lift the monitor carefully to prevent it from slipping or falling.
2.2 Cable management You can organize the cables with the help of the input/output port cover. • Arranging the cables • Using the input/output port cover: the cover can be attached or detached.
2.3 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • The recommended adjusting angle is +21˚ to -6˚ (for tilt)/+35˚ to -35˚ (for swiveling)/ +100 mm (for height adjustment).
2.4 Detaching the arm (for VESA wall mount) The detachable arm of this monitor is specially designed for VESA wall mount. To detach the arm: 1. Have the front of the monitor face down on a table. 2. Use a screwdriver to remove the covers on where the monitor and the arm meet. 3. Loosen the four screws on the back of the monitor and remove the arm/base. 4. Fasten the wall mount screws. 1 2 3 4 5 We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.5 Connecting the cables Connect the cables as the following instructions: • • To connect the power cord: a. Connect the power adapter securely to the monitor’s DC IN input. b. Connect one end of the power cord to the power adapter and the other end to a power outlet. To connect the DisplayPort/HDMI cable: a. Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/ HDMI port. b. Connect the other end of the DisplayPort/HDMI cable to your computer's DisplayPort/HDMI port.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure Normal Mode DisplayPort HDR Off Racing Mode 3440x1440@60 Hz Aura Off ROG Swift PG35V Over Clocking Max Refresh Rate 200 Hz Blue Light Filter GameVisual Color Image Input Select System Setup BACK MOVE/ENTER 1. Press the 2. Move the ( ) button up/down to navigate through the functions. Highlight the desired function and press the ( ) button to activate it.
• 2. Max Refresh Rate 200 Hz: allows you to select a maximum refresh rate of 200Hz (Only for DisplayPort input). After selecting, press the ( ) button twice to activate the setting. • This function is only available when the color gamut is YUV422, or RGB/ YUV444 with 8-bit color depth or below. • After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA Control Panel. If you don’t see an image, disconnect the DP cable and use the monitor OSD to try again with a safer Max Refresh Rate.
3. GameVisual This function contains 6 sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
4. Color You can set the color related setting from this menu. Normal Mode DisplayPort HDR Off Racing Mode 3440x1440@60 Hz Aura Off ROG Swift PG35V Over Clocking Brightness Blue Light Filter Reference White (nits) GameVisual Contrast Color Color Temp. Image Gamma 60 50 Input Select System Setup BACK MOVE/ENTER EXIT • Brightness: The adjusting range is from 0 to 100.
A slight halo effect may be noticed on dark backgrounds when the function is enabled. This is normal and not a malfunction. • Auto Black Level: Increases the black level according to the ambient brightness, making different shades of grey more visible to human eyes. • Aspect Control: Adjusts the aspect ratio to Full, Aspect, or 1:1. 6. Input Select In this function, you can select your desired input source and toggle the input auto switch function between on and off.
• If the Aura Sync function is turned ON, the Aura RGB function will become unavailable. • See 3.2 Aura for information on how to customize Aura light effects from your computer. • OSD Position: Adjusts the horizontal position (H-Position)/the vertical position (V-Position) of the OSD. • Transparency: Adjusts the OSD background from opaque to transparent. • OSD Timeout: Adjusts the OSD timeout from 10 to 120 seconds. • Key Lock: To disable all function keys. Press cancel the key lock function.
• Display SDR Input: “sRGB” is recommended when using Microsoft based systems. “Wide Gamut” is recommened when using Mac OS systems. • All Reset: “Yes” allows you to restore the default settings.
3.2 Aura AURA is a software program that controls the colorful LEDs on supported devices, such as monitors, motherboards, graphic cards, desktop PCs, etc. Aura allows you to adjust the color of the RGB LEDs on these devices and select different light effects. You can also correct or adjust the color of the LEDs by calibrating them. To activate Aura: 1. Turn ON the Aura Sync function in the OSD menu. 2. Connect the USB 3.0 upstream port of the monitor to the USB port of your computer. 3.
3.3 Specifications summary Panel Type TFT LCD Panel size 35.03”W (21:9, 88.98 cm) wide screen Max. Resolution 3440 x 1440 Pixel pitch 0.2382 mm x 0.2402 mm Brightness (Typ.) 1000 cd/m2 (Peak/HDR on) Contrast Ratio (Typ.) 2500:1 Viewing angle(H/V) CR>10 178˚/178˚ Display colors 16.7 M Response time 2 ms (Gray to Gray) Color temperature selection 4 color temperatures Analog input No Digital input DisplayPort v1.4 x 1, HDMI v2.
Accessories DP cable, HDMI cable, USB cable, power adapter, power cord, quick start guide, warranty card, LED projection cover and changeable films, input/output port cover, wall mount screws, color calibration testing report, ROG welcome card Compliance and Standards UL/cUL, CB, CE, ErP, FCC, CCC, BSMI, CU, C-Tick, VCCI, PSE, CEL, J-MOSS, RoHS, WEEE, Windows 7 & 8.1& 10 WHQL, KCC, E-STANDBY, TUV-Flicker Free, TUV Low Blue Light, UkrSEPRO, RCM *Specifications are subject to change without notice.
3.4 Outline dimensions ASUS PG35V Outline Dimension *Unit:mm(inch) 21 6 157.22[6.19] 168.57[6.64] 228.04[8.98] 3,74 [.1] 170,46 [6.7] 9,77 [.4] 833,35 [32.8] 813,98 [32.0]-Active-Area 407 [16.0] 526,27 [20.7] 2,67 [.1] 23 [.9] 192,28 [7.6] 9,7 [.4] 3,74 [.1] 305,59 [12.0] 149,53 [5.9] 345,89-Active-Area [13.6] 379,91 [15.0] 35° 549,19 [21.6] Swivel:+/-35 Degree 305,61 [12.0] 266.47[10.5] 100[3.93] 366,47 [14.4] 435,69 [17.2] 35° Wall mount keep out area 169,28 [6.7] 89,6 [3.5] 117[4.
3.5 Troubleshooting (FAQ) Problem Power LED is not ON Possible Solution • Press the power button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights white and there is no • Check if the monitor and the computer are in the ON mode. screen image • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent.
3.6 Supported operating mode HDMI input Resolution Frequency Refresh Rate 640 x 480 800 x 600 1024 x 768 3440 x 1440 60Hz 60Hz 60Hz 60Hz 3440 x 1440* 100Hz Note: *Not supported when color format is RGB/YUV444 in 10-bit or 12-bit color depth. Do not support interlace and color gamut YUV420.
DisplayPort input--Over clocking Resolution Frequency Refresh Rate 3440 x 1440* 200Hz Note: *Not supported when color format is RGB/YUV444 in 10-bit or 12-bit color depth. Do not support interlace. Since HDR content is aimed at 4K (3840 x 2160) resolution, other resolution may result in abnormal images. Please wait for Over Clocking function to initiate. The process may take less than 40 seconds.