Quick Start Guide

ROG Rapture GT6
ROG Rapture AX10000 Tri-band Gaming Mesh Router
Model: GT6
Quick
Start Guide
Hardware Explanations
GT6 I/O Overview
2.5G / 1G WAN port
Connect your modem to this
WAN port with a network cable.
LAN ports 1-3
Connect your PC to a LAN port with
a network cable.
Before Setup
ASUS Router App
AiMesh Setup Steps
1
Find two ROG Rapture GT6, and power them on.
2
Use a network cable to connect your modem to the WAN port of either ROG Rapture GT6. This ROG
Rapture GT6 will be the AiMesh router, and the other ROG Rapture GT6 will be the AiMesh node.
3
The LED indicator turns solid blue to indicate that ROG Rapture GT6 is ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh router
AiMesh node
Download free ASUS Router APP to set up and
manage your router(s).
Prepare
01
Place your ROG Rapture GT6 router and node within 1~3 meters of
each other during the setup process.
AiMesh node
02
Keep your AiMesh node powered on and standby for AiMesh system
settings.
Launch ASUS Router APP, and then follow the on-screen instructions
to nish the AiMesh setup.
Launching ASUS Router APP
03
DC Power adapter DC Output: +19V with max 2.37A current
DC Output: +19.5V with max 2.31A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
LAN ports 1-3
2.5G/1G WAN port
Power switch
within
1~3 meters
AiMesh router
AiMesh node
USB 3.2 Gen 1x1 port
DCIN port
NOTES: When you're using a wireless backhaul to connect your router and AiMesh node, the WAN port on your AiMesh
node can be used as a LAN port providing up to 2.5G transimission speed.
GT6 LED Overview
LED indicator
Aura RGB
ROG Rapture GT6 LED indicator
Solid blue
Your ROG Rapture GT6 is ready for setup.
Solid white
Your ROG Rapture GT6 is online and works
well.
Solid red
Your ROG Rapture GT6 router has no Internet
connection. / Your node is disconnected from
the router.
Solid yellow
The signal between your ROG Rapture GT6
router and the node is weak.