Quick Start Guide

ROG Rapture GT-AX6000
Dual Band Gaming Router
Quick
Start Guide
Hardware Explanations
I/O Ports Overview LED Lights Overview
DC Power adapter DC Output: +19V with 2.37A current
DC Output: +19.5V with 2.31A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
One Router Setup Steps
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If it
has a battery backup, remove the battery.
5
[App] Launch ASUS Router App and follow the
instructions to complete the setup.
WE SUGGEST...
Modem back
Unplug
Install your Router
02
1
Plug the adapter into the DCIN port, and press the Power switch.
2
Connect your modem to the 2.5G/1G WAN port at the back side of the
router with the network cable provided.
3
Power on the modem. Plug modem to the power outlet and power on.
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for internet,
you will need your username
/ password from your Internet
service provider (ISP) to properly
congure your router.
Modem front
– Or via web browser
3
[Wired] Connect your PC to LAN port at the back
side of the router using an additional network
cable.
[Wireless] Connect to the network with default SSID shown
on the product label on the back side of your router “ASUS_
X X ”.
4
[Wired / Wireless] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
Follow the instructions to
complete the setup.



– Via app
3
[App] On your iOS or Android mobile device, go
to the app store, search forASUS Router, and
download the app.
4
[App] On your iOS or Android mobile device, tapSettings > Wi-Fi, connect
to the default network SSID shown on the product label on the back side of
the router. Or scan the QR code on the product label to connect the default
network SSID.
* XX refers to the last two
digits of MAC address. You
can nd it on the label on
the back of your router.

_



LAN2.5G
WAN
2.4GHz 5GHzPower WPS
2
The power LED will light up when the hardware is ready.
DCIN port
LAN ports 1-4
2.5G/1G
WAN port
USB 3.2 Gen 1
port
Power
switch
USB 2.0 port
2.5G/1G
LAN port
Reset
button
2.5G
LAN