Motherboard ROG CROSSHAIR VIII HERO (WI-FI)
E15378 First Edition May 2019 Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information....................................................................................................... vi About this guide......................................................................................................... vii ROG CROSSHAIR VIII HERO (WI-FI) specifications summary................................ ix Package contents....................................................................................................... xv Installation tools and components......
Chapter 3: Knowing BIOS............................................................................................. 3-1 3.2 BIOS setup program................................................................................... 3-2 3.2.1 Advanced Mode........................................................................... 3-3 3.2.2 EZ Mode...................................................................................... 3-6 3.2.3 Q-Fan Control...................................................
Chapter 4: 4.1 RAID Support AMD RAID Array configurations................................................................ 4-1 4.1.1 RAID definitions........................................................................... 4-1 Appendix Q-Code table............................................................................................................. A-1 Notices .....................................................................................................................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
ROG CROSSHAIR VIII HERO (WI-FI) specifications summary CPU AMD AM4 Socket for 3rd and 2nd Gen AMD Ryzen™ / 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors* Chipset AMD X570 * Refer to www.asus.com for the AMD CPU support list. 3rd Gen AMD Ryzen™ Processors 4 x DIMM, max. 128GB, DDR4 4600+(O.C.) / 4533(O.C.) / 4400(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3733(O.C.) / 3600(O.C.) / 3466(O.C.) / 3200(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.
ROG CROSSHAIR VIII HERO (WI-FI) specifications summary 3rd Gen AMD Ryzen™ Processors - 1 x M.2 Socket 3 with M Key, type 2242 / 2260 / 2280 (PCIE 4.0 x4 and SATA modes) storage devices support 2nd Gen AMD Ryzen™ / 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors Storage -1xM .2 Socket 3 with M Key, type 2242 / 2260 / 2280 (PCIE 3.0 x4 and SATA modes) storage devices support AMD X570 chipset - 8 x SATA 6Gb / s ports - Support Raid 0, 1, 10 -1xM .
ROG CROSSHAIR VIII HERO (WI-FI) specifications summary 3rd Gen AMD Ryzen™ Processors - 4 x USB 3.2 Gen 2 ports (4 ports at back panel, Type-A [red]) 2nd Gen AMD Ryzen™ / 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors - 4 x USB 3.2 Gen 1 ports (4 ports at back panel, Type-A [red]) USB AMD X570 chipset - 1 x USB 3.2 Gen 2 front panel connector -4xU SB 3.2 Gen 2 ports (4 ports at back panel, 3 x Type-A [red], 1 x Type-C) -6xU SB 3.
ROG CROSSHAIR VIII HERO (WI-FI) specifications summary ASUS Exclusive Software Features - Armoury Crate - AURA - ASUS Dual Intelligent Processors 5 - 5 -way Optimization tuning key perfectly consolidates TPU Insights, EPU Guidance, DIGI+ VRM, Fan Expert 4, and Turbo app - AI Suite 3 - ASUS EZ DIY - ASUS CrashFree BIOS 3 - ASUS EZ Flash 3 - ASUS C.P.R.
ROG CROSSHAIR VIII HERO (WI-FI) specifications summary 1 x USB 3.2 Gen 2 front panel connector 1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports 2 x USB 2.0 headers supports additional 4 USB 2.0 ports 1 x NODE connector 8 x SATA 6Gb/s connectors 1 x M.2 Socket 3 for M Key, type 2242/2260/2280 storage devices support 1 x M.
ROG CROSSHAIR VIII HERO (WI-FI) specifications summary BIOS 256 Mb Flash ROM, UEFI AMI BIOS, PnP, WfM2.0, SM BIOS 3.2, ACPI 6.2 Manageability WOL, PXE Overwolf WinRAR Software Anti-virus software (1-year full subscription) Operating System Windows® 10 64-bit Form Factor ATX Form Factor, 12“ x 9.6” (30.5cm x 24.4cm) Specifications are subject to change without notice.
Package contents Check your motherboard package for the following items. Motherboard 1 x ROG CROSSHAIR VIII HERO (WI-FI) motherboard 1 x 4-in-1 SATA 6Gb/s cable Cables 1 x Extension Cable for RGB strip 1 x Extension Cable for RGB addressable strip 1 x ASUS 2x2 dual band Wi-Fi antenna Accessories 1 x Q-Connector 1 x 2-in-1 M.
Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit AMD AM4 CPU AMD AM4/AM3 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card The tools and components in the table above are not included in the motherboard package.
Product Introduction Product Introduction 1.1 Motherboard overview 1.1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. Components shown in this section may require additional purchase. Refer to Package contents section for more information about the contents of your motherboard package. • Unplug the power cord from the wall socket before touching any component.
1.1.2 Motherboard layout Chapter 1 Refer to Internal connectors and Rear panel features section for more information.
ROG CROSSHAIR VIII HERO (WI-FI) Page 1-23 1-4 1-5 1-21 1-15 1-25 1-26 1-9 1-9 1-29 1-18 1-27 1-19 1-16 1-22 1-24 1-22 1-11 1-20 1-28 1-28 1-10 1-10 1-12 1-18 1-17 1-27 Chapter 1 Layout contents 1. Power connectors 2. CPU socket 3. DIMM slots 4. Fan and Pump connectors 5. Q-Code LED 6. RGB LED connector 7. Addressable Gen2 LED connector 8. Power button 9. Reset button 10. ProbeIt 11. USB 3.2 Gen 2 connector 12. PCH Fan connector 13. USB 3.2 Gen 1 connector 14. SATA 6Gb/s connector 15.
1.1.3 Central Processing Unit (CPU) Chapter 1 The motherboard comes with an AM4 socket designed for AMD AM4 Socket for 3rd and 2nd Gen AMD Ryzen™ / 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors. 1-4 • The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the AM4 socket. • The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the CPU and damaging the CPU.
1.1.4 System memory Chapter 1 The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4 (Double Data Rate 4) memory modules. A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
Memory configurations You may install 2 GB, 4 GB, 8 GB, 16 GB, and 32 GB unbuffered and non‑ECC DDR4 DIMMs into the DIMM sockets. Chapter 1 You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
1.1.5 Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No.
PCIe operating mode 3rd Gen AMD Ryzen™ Processors Chapter 1 Slot Description PCIe x16_1 PCIe x16_2 PCIe x16_3 M.2_1 (PCIe Mode) M.2_1 (SATA Mode) M.2_2 (PCIe Mode) M.2_2 (SATA Mode) Single VGA / PCIe card x16 (PCIe 4.0) N/A N/A x4 (PCIe 4.0) Support x4 (PCIe 4.0) Support PCIe operating mode Dual VGA / PCIe card x8 (PCIe 4.0) x8 (PCIe 4.0) N/A x4 (PCIe 4.0) Support x4 (PCIe 4.0) Support Triple VGA / PCIe card x8 (PCIe 4.0) x8 (PCIe 4.0) x4 (PCIe 4.0) x4 (PCIe 4.0) Support x4 (PCIe 4.
1.1.6 1. Onboard buttons Power button Chapter 1 Press the Power button to power up the system, or put the system into sleep or softoff mode (depending on the operating system settings). The button also lights up when the system is plugged to a power source, indicating that you should shut down the system and unplug the power cable before removing or installing any motherboard component. 2. Reset button Press the Reset button to reboot the system.
3. Safe Boot button The Safe Boot button temporarily applies safe settings to the BIOS while retaining the overclocked settings, allowing you to modify the settings causing a boot failure. Press this button at anytime to force the system to reboot into the BIOS safe mode. Chapter 1 4. ReTry button The ReTry button is specially designed for overclockers and is most useful during the booting process where the Reset button is rendered useless.
1.1.7 1. Onboard switches Slow Mode switch ROG CROSSHAIR VIII HERO (WI-FI) Chapter 1 The system may crash due to the CPU being unstable when using extreme overclocking settings. Enable the Slow Mode switch during LN2 benching to decrease the processor frequency and stabilize the system, allowing you to keep track of the overclocking data.
1.1.8 1. Onboard jumpers LN2 Mode jumper Chapter 1 Set to pins 2-3 to optimize the motherboard to remedy the cold-boot bug during POST and help the system boot successfully.
1.1.9 1. Onboard LEDs Q LEDs Chapter 1 The Q LEDs check key components (CPU, DRAM, VGA, and booting devices) during the motherboard booting process. If an error is found, the critical component’s LED stays lit up until the problem is solved. The Q LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. 2. CPU Status LED The CPU Status LED will indicate the current status of your CPU.
3. Storage Device Activity LED The Storage Device Activity LED lights up or blinks when data is read from or written to the storage device or storage device add-on card. Chapter 1 4. 8-pin Power Plug LED The 8-pin Power Plug LED lights up to indicate that the 8-pin power plug is not connected. 1-14 • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs.
5. Q-Code LED Chapter 1 The Q-Code LED design provides you with a 2-digit error code that displays the system status. • The Q-Code LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. • Please refer to the Q-Code table in the Appendix section for more details.
1.1.10 1. Internal connectors SATA 6Gb/s connector Chapter 1 The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable. If you installed SATA storage devices, you can create a RAID 0, 1, and 10 configuration through the onboard AMD X570 chipset. 1-16 • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID].
2. M.2 slot Chapter 1 The M.2 slot allows you to install M.2 devices such as M.2 SSD modules. • For 3rd Gen AMD Ryzen™ Processors, the M.2_1 supports PCIe 4.0 x4 and SATA modes M key design and type 2242/2260/2280 storage devices. • For 2nd Gen AMD Ryzen™ / 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors, the M.2_1 supports PCIe 3.0 x4 and SATA modes M key design and type 2242/2260/2280 storage devices. • For AMD X570 chipset, the M.2_2 supports PCIe 4.
3. Front Panel Audio connector The front panel audio connector is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this connector. Chapter 1 We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability. 4. USB 3.2 Gen 2 connector The USB 3.2 Gen 2 connector allows you to connect a USB 3.2 Gen 2 module for additional USB 3.
5. USB 3.2 Gen 1 connector Chapter 1 The USB 3.2 Gen 1 connector allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 connector provides data transfer speeds of up to 5 Gb/s. The USB 3.2 Gen 1 module is purchased separately. The plugged USB 3.2 Gen 1 device may run on xHCI or EHCI mode depending on the operating system’s setting.
6. USB 2.0 connector The USB 2.0 connector allows you to connect a USB module for additional USB 2.0 ports. The USB 2.0 connector provides data transfer speeds of up to 480 MB/s connection speed. Chapter 1 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately.
7. Fan and Pump connectors Chapter 1 The Fan and Pump connectors allow you to connect fans or pumps to cool the system. Header CPU_FAN CPU_OPT CHA_FAN1 CHA_FAN2 CHA_FAN3 H_AMP AIO_PUMP W_PUMP+ • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • Ensure the cable is fully inserted into the connector.
8. Water Cooling System connectors The Water Cooling System connectors allow you to connect sensors to monitor the temperature and flow rate of your water cooling system. You can manually adjust the fans and water pump to optimize the thermal efficiency of your water cooling system. Chapter 1 9. Thermal Sensor connector The Thermal Sensor connector allows you to connect a sensor to monitor the temperature of the devices and the critical components inside the motherboard.
10. Power connectors Chapter 1 These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation, find the proper orientation and push down firmly until the power supply plugs are fully inserted. • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs.
11. System Panel connector The System Panel connector supports several chassis-mounted functions. Chapter 1 • System Power LED connector (PLED) The 2-pin connector allows you to connect the System Power LED. The System Power LED lights up when the system is connected to a power source, or when you turn on the system power, and blinks when the system is in sleep mode. • Storage Device Activity LED connector (HD_LED) The 2-pin connector allows you to connect the Storage Device Activity LED.
12. RGB LED connector Chapter 1 The RGB LED connector allows you to connect RGB LED strips. The RGB LED connector supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3m. Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
13. Addressable Gen2 LED connector The Addressable Gen2 LED connector allows you to connect individually addressable RGB WS2812B LED strips or WS2812B based LED strips. Chapter 1 The Addressable RGB LED connector supports WS2812B addressable RGB LED strips (5V/Data/Ground), with a maximum power rating of 3A (5V) and a maximum of 120 LEDs. Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply.
14. Rear I/O Cover LED connector Chapter 1 The Rear I/O Cover LED connector is for connecting the LEDs on your rear I/O cover. 15. PCH Fan connector The PCH Fan connector is for connecting the PCH fan on your PCH cover.
16. TPM connector The TPM connector allows you to connect a Trusted Platform Module (TPM). A TPM securely stores keys, digital certificates, passwords, data, and also helps enhance network security, protect digital identities, and ensures platform integrity. Chapter 1 The TPM is purchased separately. 17. Node connector The Node connector allows you to connect Node compatible devices. Visit www.asus.com for more information about the devices and the latest compatibility list.
1.2 ProbeIt Chapter 1 The ROG ProbeIt allows you to detect your system’s current voltage and OC settings using a multimeter. You can also measure the ProbeIt points during overclocking. Using ProbeIt Connect one of the probe onto the GND ProbeIt point, then connect the other probe onto another ProbeIt point to measure the corresponding voltage information. The illustration above is for reference only, the actual motherboard layout and measure points may differ by model.
Chapter 1 1-30 Chapter 1: Product Introduction
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 2.1.1 CPU installation ROG CROSSHAIR VIII HERO (WI-FI) Chapter 2 The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
2.1.2 Cooling system installation Apply the Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary.
Chapter 2 CPU heatsink and fan assembly Type 2 When using this type of CPU fan, remove the screws and the retention module only. Do not remove the plate on the bottom.
To install an AIO cooler Chapter 2 AIO_PUMP CPU_FAN CPU_OPT 2-4 Chapter 2: Basic Installation
Motherboard installation 1. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. 2. Remove the screws that secure the PCH cover (A), then remove the PCH cover (B). 3. Remove the screws that secure the M.2 heatsink (A), then remove the M.2 heatsink (B). ROG CROSSHAIR VIII HERO (WI-FI) Chapter 2 2.1.
4. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard.
DIMM installation Chapter 2 2.1.
2.1.5 ATX power connection Chapter 2 OR 2-8 AND • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs.
2.1.
2.1.7 Front I/O connector To install ASUS Q-Connector To install USB 3.2 Gen 2 connector USB 3.2 Gen 2 Chapter 2 This connector will only fit in one orientation. Push the connector until it clicks into place. To install USB 3.2 Gen 1 connector To install USB 2.0 connector USB 3.2 Gen 1 USB 2.
2.1.
2.1.9 M.2 installation Supported M.2 type varies per motherboard. For type 2280 M.2 on M.2_1 socket For type 2242 / 2260 M.2 on M.2_1 socket 1 1 2 2 1 3 1 3 5 Chapter 2 4 5 4 3 3 6 6 8 7 8 8 7 10 10 9 10 9 10 12 11 12 The M.2 is purchased separately.
For type 22110 M.2 on M.2_2 socket 3 For type 2242 / 2260 / 2280 M.2 on M.2_2 socket 3 1 1 2 2 1 Chapter 2 1 4 4 6 5 6 6 5 8 7 8 The M.2 is purchased separately.
2.1.10 Wi-Fi antenna installation Installing the ASUS 2x2 dual band W-Fi antenna Connect the bundled ASUS 2x2 dual band Wi-Fi antenna connector to the Wi-Fi ports at the back of the chassis. Chapter 2 • Ensure that the ASUS 2x2 dual band Wi-Fi antenna is securely installed to the Wi-Fi ports. • Ensure that the antenna is at least 20 cm away from all persons. The illustration above is for reference only.
2.2 BIOS update utility USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system. Simply insert a USB storage device to the USB port, press the USB BIOS Flashback button for three seconds, and the BIOS is updated automatically. To use USB BIOS Flashback: 1. Insert a USB storage device to the USB Flashback port. 2. Visit https://www.asus.com/support/ and download the latest BIOS version for this motherboard. 3.
2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection Chapter 2 Rear panel connectors 1. Clear CMOS button. Press this button to clear the BIOS setup information only when the system hangs due to overclocking. 2. USB 3.2 Gen 1 ports E1 and E2 3. USB 3.2 Gen 1 ports E3 and E4 4. 2.5G LAN (RJ-45) port* 5. LAN (RJ-45) port* 6. USB BIOS Flashback™ button 7. Wi-Fi 802.11 a/b/g/n/ac/ax, Bluetooth V5.0 8. USB 3.2 Gen 2 Type-A ports 1 and 2 9. USB 3.
* LAN ports LED indications ACT/LINK LED Activity Link LED Speed LED Status Description Status Description OFF No link OFF 10 Mbps connection ORANGE Linked ORANGE 100 Mbps connection BLINKING Data activity GREEN 1 Gbps connection SPEED LED LAN port Realtek RTL8125-CG 2.5G LAN port LED indications Speed LED Status Description Status Description OFF No link OFF 100 Mbps connection GREEN Linked GREEN 2.
2.3.
Connect to 4-channel Speakers Chapter 2 Connect to 5.1-channel Speakers Connect to 7.
2.4 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: 6. a. Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 3: BIOS Setup BIOS Setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. Main For changing the basic system configuration Extreme Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings.
Search (F9) This button allows you to search for BIOS items by entering its name, enter the item name to find the related item listing. AURA (F4) This button allows you to turn the RGB LED lighting or functional LED on or off. [All On] All RGB LEDs and Functional LEDs will be enabled. [Stealth Mode] All RGB LEDs and Functional LEDs will be disabled. [Aura Only] RGB LEDs will be enabled, Functional LEDs will be disabled. [Aura Off] Functional LEDs will be enabled, RGB LEDs will be disabled.
3.2.2 EZ Mode The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the hotkey for the advanced BIOS settings. To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the hotkey. Displays a quick overview of the system status Displays the system properties of the selected mode.
3.2.3 Q-Fan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Chapter 3 3-8 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. OC Setup OC Tuning To start OC Tuning: 1. Press on your keyboard or click open EZ Tuning Wizard screen. 2. Click OC then click Next. 3. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next.
4. Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not sure, then click Next. 5. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning.
3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. ROG CROSSHAIR VIII HERO (WI-FI) Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.
Adding items to My Favorites To add BIOS items: from the BIOS screen to open 1. Press on your keyboard or click Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3. Select an item from main menu panel, then click the submenu that you want to save or press on your keyboard.
3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. 3.5 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.1.
Memory Frequency This item allows you to set the memory operating frequency. The configurable options vary with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized setting. Configuration options: [Auto] [DDR4-1333MHz] - [DDR4-5000MHz] TPU This item allows you to automatically overclock the CPU and DRAM frequencies and voltage for an enhanced system performance. [Keep Current Settings] Keep the current settings without changing anything.
3.6.2 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. PSS Support This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT objects. Configuration options: [Disabled] [Enabled] [Auto] NX Mode This item allows you enable or disable no-execute page protection function.
SMART Self Test S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] SATA6G_1(Gray) - SATA6G_8(Gray) SATA6G_1 - SATA6G_8 This item allows you to enable or disable the selected SATA port.
When system is in sleep, hibernate or soft off states [All On] [Stealth Mode] [Aura Only] [Aura Off] All RGB LEDs and Functional LEDs will be enabled. All RGB LEDs and Functional LEDs will be disabled. RGB LEDs will be enabled, Functional LEDs will be disabled. Functional LEDs will be enabled, RGB LEDs will be disabled. Realtek 2.5G LAN Controller This item allows you to enable or disable the Realtek 2.5G LAN Controller.
3.6.5 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss.
3.6.7 USB Configuration The items in this menu allow you to change the USB-related features. The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup.
3.6.10 AMD CBS The items in this menu display the CPU-related information that the BIOS automatically detects. 3.6.11 AMD PBS The items in this menu display the CPU-related information that the BIOS automatically detects. 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items.
3.8 Boot menu The Boot menu items allow you to change the system boot options. Boot Configuration Fast Boot [Disabled] [Enabled] Allows your system to go back to its normal boot speed. Allows your system to accelerate the boot speed. The following item appears only when you set the Fast Boot to [Enabled]. Next Boot after AC Power Loss [Normal Boot] Returns to normal boot on the next boot after an AC power loss. [Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.
Boot from PCI-E/PCI Expansion Devices This item allows you to select the type of PCI-E/PCI expansion devices that you want to launch. Configuration options: [Legacy only] [UEFI driver first] Secure Boot This item allows you to configure the Windows® Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST. Boot Option Priorities These items specify the boot device priority sequence from the available devices.
3.9.2 ASUS Secure Erase SSD speeds may lower over time as with any storage medium due to data processing. ASUS Secure Erase completely and safely cleans your SSD, restoring it to factory performance levels. To launch ASUS Secure Erase, click Tool > ASUS Secure Erase on the Advanced mode menu. Check the ASUS support site for a full list of SSDs tested with ASUS Secure Erase. The drive may become unstable if you run ASUS Secure Erase on an incompatible SSD.
3.9.3 ASUS User Profile This item allows you to store or load multiple BIOS setting profiles. Load Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version.
3.9.6 ASUS Armoury Crate This item allows you to enable or disable the system to download ASUS Armoury Crate. Download & Install ARMOURY CRATE app This item allows you to enable Armoury Crate download Process. Configuration options: [Disabled] [Enabled] 3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu.
3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.
3.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS‑based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press . 2.
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. To update the BIOS by Internet: Chapter 3 1. Enter the Advanced Mode of the BIOS setup program.
3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.
Chapter 3 3-30 Chapter 3: BIOS Setup
Chapter 4: RAID Support RAID Support 4.1 AMD RAID Array configurations 4 The motherboard comes with the RaidXpert2 Configuration Utility that supports Volume, RAIDABLE, RAID 0, RAID 1, and RAID 10 (depends on system licensing) configurations. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support. 4.1.
Chapter 4 4-2 Chapter 4: RAID Support
Appendix Appendix Code 00 01 02 03 04 06 Description Not used Power on. Reset type detection (soft/hard).
Q-Code table Code Appendix E0 E1 E2 E3 E4 – E7 E8 E9 EA EB EC – EF F0 F1 F2 F3 F4 F5 – F7 F8 F9 FA FB – FF 60 61 62 63 – 67 68 69 Description S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) S3 Boot Script execution Video repost OS S3 wake vector call Reserved for future AMI progress codes S3 Resume Failed S3 Resume PPI not Found S3 Resume Boot Script Error S3 OS Wake Error Reserved for future AMI error codes Recovery condition triggered by firmware (Auto recovery) Recovery condition triggere
Q-Code table Description Boot Device Selection (BDS) phase is started Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization PCI Bus Enumeration PCI Bus Request Resources PCI Bus Assign Resources Console Output devices connect Console input devices connect Super IO Initialization USB initialization is started USB Reset USB Detect USB Enable Reserved for future AMI codes IDE initialization is started IDE Reset IDE Detect IDE Enable SCSI initialization is sta
Q-Code table Appendix Code B4 B5 B6 B7 B8– BF D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC Description USB hot plug PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) Reserved for future AMI codes CPU initialization error System Agent initialization error PCH initialization error Some of the Architectural Protocols are not available PCI resource allocation error.
Notices FCC Compliance Information Asus Computer International Appendix Responsible Party: Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 Identification of the assembled product: INTEL® WI-FI 6 AX200 Identification of the modular components used in the assembly: Model Name: INTEL® WI-FI 6 AX200 FCC ID: PD9AX200NG This device complies with part 15 of the FCC Rules.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) Appendix This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Appendix Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
NCC: Taiwan Wireless Statement Appendix 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及 干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或 工業、科學及醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。 Japan RF Equipment Statement 屋外での使用について 本製品は、5GHz帯域での通信に対応しています。電波法の定めにより5.2GHz、5.
ROG CROSSHAIR VIII HERO (WI-FI) Forenklet EU-overensstemmelseserklæring ASUSTeK Computer Inc. erklærer hermed at denne enhed er i overensstemmelse med hovedkravene og øvrige relevante bestemmelser i direktivet 2014/53/EU. Hele EU-overensstemmelseserklæringen kan findes på https://www.asus.com/support/ Wi-Fi, der bruger 5150-5350 MHz skal begrænses til indendørs brug i lande, der er anført i tabellen: Vereenvoudigd EU-conformiteitsverklaring ASUSTeK Computer Inc.
Appendix Supaprastinta ES atitikties deklaracija Šiame dokumente bendrovė „ASUSTek Computer Inc.“ pareiškia, kad šis prietaisas atitinka pagrindinius reikalavimus ir kitas susijusias Direktyvos 2014/53/ES nuostatas. Visas ES atitikties deklaracijos tekstas pateikiamas čia: https://www.asus.
ASUS contact information ASUSTeK COMPUTER INC. Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com Appendix Address Telephone Fax Web site +86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 48720 Kato Rd., Fremont, CA 94538, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.
Appendix A-12 Appendix
