R300 E3403 Quick Start Guide Quick Start Guide 15G06A348000
Layout Features 1 3 2 6 7 5 4 9 8 10 11 12 1 External Antenna port Connects to an external antenna for better signal performance (the external antenna is optional) 2 Micro SD Slot Insert the external Micro SD memory card to this slot 3 Sleep Mode Button Press to turn on the device, or to enter into sleep mode 4 Charging LED Red- charging, Yellow- full charged 5 Bluetooth LED When function turning on, it's lighting Blue 6 Light Sensor Automatically adjusts the backlight accordin
Charging the Battery You can charge the device from a car charger kit. Plug any of these cables to the mini-USB port on the right side of the device. Car charger kit NOTE: - When the Main Power Switch is set to Off, the device can not be charged. - Charge the battery before using the device. - While charging, the power LED lights up in red. When the battery is fully charged, the power LED turns to yellow. - Charging may take several hours. - You can use the device while charging.
Install the Car Kit and Turn on the Device To turn on the device, set the main power switch (at the bottom of the device) to ON. To enter into/wake up from sleep mode, press the Sleep Mode Button ( ) on the top of the device. Sleep Mode Button Note: - When the main power switch is set to Off, the device is not able to be charged. - If you press the Sleep Mode button when the device is on, it enters into sleep mode. - When the device is on, it takes longer time for the battery to be fully charged.
Main Menu and Basic Settings The main menu appears after you turn on the device. From the main menu, you can: Tap Navigation to enter the navigation system. Tap Video Player to play videos. Tap Music Player to play music. Tap Photo Viewer to view photos. Tap Phone to set and use bluetooth and phone features. Tap Settings to adjust the device settings (see figures below).
The Settings Menu - The System Info button allows you to view the system information. - The Language button allows you to choose the language for the text. - The Backlight button allows you to adjust the LCD brightness. It provides two adjustment modes, Fix backlight brightness and Adjust by environment brightness. R300 has Light Sensor function that allows you to adjust LCD brightness for either a lighter or a darker environment. - The Date & Time button allows you to set the date and time for your device.
Multi-Media Features R300 allows you to play music (mp3 and wma files), view photos (jpg. and bmp. files) and videos (wmv. files). Tap the respective icons from the main menu to launch the applications.
Using Navigation The Navigation Menu When ASUS GO is started, the Navigation Menu appears. From here you can reach all parts of ASUS GO. • Tap Find Address to specify an address as your destination. • Tap Recent Places for a list of recent destinations. • Tap Find POI to select one of the stored Points of Interest. • Tap My Favourites for one of your favourite destinations.
• Tap Settings to customise the way ASUS GO works. • Tap Exit to stop navigation, and exit ASUS GO. Operating modes ASUS GO can operate in two different modes: • Normal Mode - designed for easy operation when performing frequent tasks • Expert Mode - designed for performing complex tasks and for advanced settings This Quick Start Guide covers actions in Normal Mode. See the online User Manual for detailed instructions in both modes. To switch to Expert Mode, tap Settings, then tap Expert mode.
Find an address (1) 1. In the Navigation Menu tap Find Address. 2. Select the destination country. Tap the first line on the list that shows the country you are currently in (or searched for recently). On the next screen, select the country from the list. In some countries, you are also asked to select the state. 3. Select the destination city. Tap the second line on the list that shows the city you are currently in (or searched for recently). Use the virtual keyboard to type the name of the city.
Find an address (2) 5. Enter the house number. Tap the line that says and type the house number. You can also: • Tap City Center after selecting the city if you do not have a specific address on your mind, • Tap Street Center after selecting the street if you are just looking for a street and not a specific address, or • Tap Intersection to find the corner of two streets.
following choices: • Tap Navigate To to select the address as your destination and start navigating there. • Tap Add to Favorites to save the address as one of your favourite destinations. • Tap Map to browse the map without planning a route. • Tap Info to display the address with its geographical coordinates and nearby POIs. Find a POI (1) 1. To select a Point of Interest, tap Find POI in the Navigation Menu. This will take you to the POI Search Center. 2.
3. Enter the list of POIs in one of the following ways: • Tap one of the POI groups to open a list of its subgroups, then tap the needed subgroup to enter the list of POIs. Use the left and right arrow buttons to see additional POI groups. • For a complete list of POIs near the selected reference point, tap All. Find a POI (2) 4. A list of POIs is displayed, sorted by their distance from the reference point. • Tap Search to narrow the list by entering a part of the POI name.
displayed on the map. • Tap Navigate To to select the POI as your destination and start navigating there. • Tap Add to Favorites to save the POI as one of your favourite destinations. • Tap Info to display detailed information on the POI.
Zoom in and out by tapping the corresponding buttons. In 3D view, you can also tilt and rotate the view with the arrow buttons. In 2D map mode, you can also modify the planned route by tapping Detour. If you want to avoid a certain route, you can set it here. Map and Navigation (2) While navigating, a thick line shows the recommended route, and an arrow represents your current position. A pictogram indicating the next manoeuvre is displayed on the left side along with its distance.
Setting Bluetooth and Using the Phone The Phone function allows the hands-free communication through a bluetooth connection to your phone. Click the Phone button from the main menu to launch the Phone program. Phone menu Note: Before using the bluetooth and phone features of R300, make sure your cellphone has Bluetooth functions. Some cellphones do not support the SMS and Contact functions of R300. To connect R300 to your cellphone: 1. Tap Dialer from the Phone Menu. 2.
To make a call: 1. Tap Dialer from the Sub-menu Phone. Step 1 2. Dial the number and tap the green phone icon to call. 3. After talk, tap the red phone icon to end a call. To receive a call, tap the green phone icon. Step 2 Step 3 Receive a call ~~~~~~End~~~~~~ For more information, please see the full User Manual which is included in the support CD of your R300. The screens and procedures in this guide may not be exactly the same with the product in your hand, please take them as reference only.
