Industrial Motherboard Q370I-IM-A R3.
E20029 First Edition March 2022 Copyright © 2022 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Chapter 1 1.1 Product overview Package contents.......................................................................... 1-1 1.2 Features......................................................................................... 1-1 1.3 Specifications................................................................................ 1-2 Chapter 2 Motherboard information 2.1 Before you proceed...................................................................... 2-1 2.2 Motherboard layout...
3.3.11 APM Configuration......................................................... 3-10 3.3.12 NCT6116D Super IO Configuration............................... 3-11 3.3.13 NCT6116D HW Monitor................................................. 3-12 3.3.14 Serial Port Console Redirection..................................... 3-15 3.3.15 Intel TXT Information..................................................... 3-16 3.3.16 USB Configuration......................................................... 3-16 3.
Chapter 1 Product overview 1.1 Package contents Check your industrial motherboard package for the following items. 1 x ASUS Q370I-IM-A R3.0 Motherboard 1 x Serial ATA 6.0 Gb/s cable 2 x M.2 screw packages 1 x ASUS I/O Shield NOTE: If any of the above items is damaged or missing, contact your distributor or sales representative immediately. 1.2 Features • Intel socket 1151 for 9th/8th Gen Intel® Core™ i7/ i5/ i3, Pentium®, and Celeron® processors, Max.
1.3 Specifications CPU Chipset Memory Graphics Intel® socket 1151 for 9th / 8th Gen Intel® Core™ i7/ i5/ i3, Pentium®, and Celeron® processors Supports Intel® 14nm CPU Supports up to 65W TDP Intel® Q370 Chipset 2 x SO-DIMM, max.64GB, DDR4 2666/2400/2133 MHz SDRAM Integrated graphics processor - Intel® HD Graphics support Multi-VGA output support: DP/DVI-D/LVDS ports - Supports DVI-D output with a maximum resolution of 1920 x 1200 @ 60Hz - Supports 2x DisplayPort 1.
1 x Front panel audio connector (AAFP) 1 x System panel connector 1 x Clear CMOS header 1 x Speaker connector 1 x LPC Debug header 1 x S/PDIF connector 1 x I2C header 1 x AT/ATX mode selection header 1 x 24-pin ATX power connector Front panel I/O ports 1 x 4-pin ATX power connector 1 x SPI TPM header 1 x M.2 socket 1 (Key E, 2230) for WiFi/BT device supports PCIE and CNVI WiFi module 1 x M.2 socket 3 (Key M, 2242/2260/2280) with PCIe and SATA modes 4 x SATA 6.
Chapter 2 Motherboard information 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. CAUTION! • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
2.2 Motherboard layout NOTE: Place four screws into the holes indicated by circles to secure the motherboard to the chassis. CAUTION! Do not overtighten the screws! Doing so can damage the motherboard. 1 2 3 4 5 6 17.0cm(6.
Connectors/Jumpers/Slots 1. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) 2. Display panel VCC power selection (6-pin VCC_PWR_SEL) 3. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 4. USB 3.2 Gen 1 connector (20-1 pin U32G1_12) 5. SATA 6.0Gb/s connectors (7-pin SATA6G_3-6) 6. LPC Debug header 7. SPI_TPM connector (14-1 pin SPI_TPM) 8. Serial port connectors (10-1 pin COM2, COM3, COM4) 9. USB 3.2 Gen 1 port (U32G1_10) 10. USB 2.0 connector (10-1pin USB78) 11. M.2 Wi-Fi 12.
2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1151 socket designed for the Intel® 9th/8th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium®, and Celeron® processors. LGA1151 IMPORTANT! Unplug all power cables before installing the CPU. CAUTION! 2-4 • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent.
2.3.1 CPU installation 1 A B 2 3 CAUTION! LGA1156 CPU is not compatible with the LGA1151 socket. DO NOT install an LGA1156 CPU on the LGA1151 socket.
4 C A B 5 2-6 Q370I-IM-A R3.
2.3.2 CPU heatsink and fan assembly installation CAUTION! Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
To uninstall the CPU heatsink and fan assembly 1 2 A B B A 2-8 Q370I-IM-A R3.
2.4 System memory This motherboard comes with two Double Data Rate 4 (DDR4) Small Outline Dual Inline Memory Module (SO-DIMM) sockets.
2.5 1. Jumpers Clear RTC RAM (2-pin CLRTC) This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. CLRTC +3V_BAT_RTC GND PIN 1 Connector type HEADER 1x2p, 2.54mm pitch, S/T To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4.
3. Intel® ME jumper (3-pin DIS_ME) This jumper allows you to enable or disable the Intel® ME function. Set this jumper to pins 1-2 to enable (default) the Intel® ME function and to pins 2-3 to disable it. 1 2 2 3 DIS_ME Normal (Default) Connector type 4. Disable intel ME function HEADER 1x3p, 2.54mm pitch, S/T Display panel VCC power selection (6-pin VCC_PWR_SEL) VCC_PWR_SEL 1 2 3.3V (Default) Setting Pins 3.
5. AT/ATX mode selection (3-pin AT_ATX_SEL) AT_ATX_SEL 1 2 2 3 ATX mode (Default) AT mode Pins 1-2 (Default) ATX mode 2-3 AT mode Connector type 6. HEADER 1x3p, 2.54mm pitch, S/T WDT Enable jumper (2-pin WDT_EN) A watchdog timer is an electronic timer that is used to detect and recover from computer malfunctions. The HW WDT (watchdog timer) Enable jumper allows the HW watchdog resets the system automatically even when the system crashes. WDT_EN 1 2 Connector type HEADER 1x2p, 2.
7. Back Light power enable mode (BKLTEN_SEL) BKLTEN_SEL 2 3 1 2 High Active (Default) Low Active Pins 1-2 (Default) High Active 2-3 Low Active Connector type 8. HEADER 1x3p, 2.54mm pitch, S/T Chassis intrusion header (4-1 pin_CHASSIS) This header is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector.
2.6 Connectors 2.6.1 Rear panel connectors 1 2 3 7 4 5 6 8 9 10 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 3. DisplayPorts. These ports are for DisplayPort-compatible devices. 4. Serial port (COM). This port connects a modem, or other devices that conform with serial specification. 5. LAN (RJ-45) ports.
9. USB 3.2 Gen 1 (up to 5Gbps) ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.2 Gen 1 devices. • USB 3.2 Gen 1 devices can only be used for data storage. • We strongly recommend that you connect USB 3.2 Gen 1 devices to USB 3.2 Gen 1 ports for faster and better performance from your USB 3.2 Gen 1 devices. • Due to the design of the Intel® 300 series chipset, all USB devices connected to the USB 2.0 and USB 3.2 Gen 1 ports are controlled by the xHCI controller.
2.6.2 1. Internal connectors USB 3.2 Gen 1 connector (20-1 pin U32G1_12) +5V_USB3_P12 S_U3RXDN1 S_U3RXDP1 GND S_U3TXDN1 S_U3TXDP1 GND S_U2DN1 S_U2DP1 GND Connect a USB 3.2 Gen 1 module to this connector for additional USB 3.2 Gen 1 front or rear panel ports. This connector complies with USB 3.2 Gen 1 specifications and provides faster data transfer speeds of up to 5 Gbps, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0.
3. USB 2.0 connector (10-pin USB78) USB+5V USB_P7USB_P7+ GND NC This connector is for an USB 2.0 port. Connect the USB cable to this connector. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed. USB78 USB+5V USB_P8USB_P8+ GND PIN 1 Connector type Header 2x5p, K9, 2.54mm pitch CAUTION! Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard. NOTE: The USB cable is purchased separately. 4.
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. A CPU_FAN PIN 1 GND 12V FAN_IN FAN_PWM A B B CHA_FAN O_CHAFAN_PWM O_CHAFANIN1 CHA FAN PWR GND PIN 1 Connector type WAFER HD 4p, 2.54mm pitch, S/T CAUTION! Do not forget to connect the fan cables to the fan connectors.
7. Front panel system panel connector (10-1 pin F_PANEL) Connector type F_PANEL GND PWRBTN#_PANEL PLED PLED+ (NC) O_RSTCON#_PR GND HDD_LED-_R HDD_LED+ PIN 1 +HDD_LED RESET +PWR LED PWR BTN This connector supports several chassis-mounted functions. Header 2x5p, K10, 2.54mm pitch • System power LED (2-pin +PWR_LED) • This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
9. LVDS connector (30-pin LVDS) This connector is for an LCD monitor that supports Low Voltage Differential Signalling (LVDS) interface.
GND S_CNV_WT_CLK_P S_CNV_WT_CLK_N GND S_CNV_WT_D0_P S_CNV_WT_D0_N GND S_CNV_WT_D1_P S_CNV_WT_D1_N GND S_WAKE#_WIFI CK_REQ_M2_WLAN#_R GND CK_WIFI_CLKN CK_WIFI_CLKP GND S_WIFI_RXN S_WIFI_RXP GND S_WIFI_TXN_C S_WIFI_TXP_C GND Key Key Key Key S_CNV_WR_CLK_P S_CNV_WR_CLK_N GND S_CNV_WR_D0_P S_CNV_WR_D0_N GND S_CNV_WR_D1_P S_CNV_WR_D1_N GND S_USB_PN10_CN S_USB_PP10_CN GND +3VSB_WIFI +3VSB_WIFI NC NC NC CNV_CLKIN_XTAL_R NC NC NC S_WIFI_DISABLE_N S_BT_DISABLE_N S_PLTRST# S_SUSCLK_R MFUART2_RXD_R MFUART2_TXD_R CNVI_
14. LPC Debug header +3V +3V CK_24M_DEBUG_LPC GND This header allows connection to a LPC Debug card. LPC_DEBUG SLAD0_SIO SLAD1_SIO SLAD2_SIO SLAD3_SIO S_LFRAME# PIN 1 Connector type HEADER 2x5p, K10, 2.0mm pitch IMPORTANT! 15. • Scan the QR code to view the meaning of each debugging code. • Debugging codes are only available for ASUS LPC Debug cards. • Contact your region sales representative for LPC Debug cards ordering.
16. Serial port connectors (10-pin COM2, COM3, COM4) These connectors are for serial (COM) ports. Connect the serial port cables to these connectors, then install the module to a slot opening at the back of the system chassis. B C Connector type COM2 COM3 COM4 PIN 1 DCD# TXD GND RTS# Ring A C RXD DTR# DSR# CTS# A B BOX header 2x5p, K10, 2.0mm pitch NOTE: The serial port cables are purchased separately. 17.
18. Embedded DisplayPort (40- pin eDP) This connector is for an internal embedded DisplayPort connection. EDP PIN 1 Connector type 19. NC BLKT_PWR BLKT_PWR BLKT_PWR BLKT_PWR NC NC S_eDP_BKLTCTL LCD_ENABKLT_CN GND GND GND GND eDP_HPD GND GND GND GND NC LCD_VCC LCD_VCC LCD_VCC LCD_VCC GND SW_OUT_eDP_AUX_C_N SW_OUT_eDP_AUX_C_P GND SW_OUT_eDP0P_C SW_OUT_eDP0N_C GND SW_OUT_eDP1P_C SW_OUT_eDP1N_C GND NC NC GND NC NC GND NC WtoB CON 40p, 0.
20. Front panel audio connector (10-1 pin AAFP) A_JD_HPOUT A_GND NC A_JD_FMIC1 This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP A_FMIC1_L A_FMIC1_R A_HPOUT_R A_JD_FRONT A_HPOUT_L PIN 1 Connector type HEADER 2x5p, K8, 2.
DC Mode EATXPWR Pins Signal Pins Signal 1 +3.3V OUT 13 +3.3V OUT 2 +3.3V OUT 14 NC 3 GND 15 GND 4 +5V OUT 16 NC 5 GND 17 GND 6 +5V OUT 18 GND 7 GND 19 GND 8 NC 20 +12V OUT 9 NC 21 +5V OUT 10 +12V IN 22 +5V OUT 11 +12V IN 23 +5V OUT 12 +3.3V OUT 24 GND Pins Signal Pins Signal 1 GND 3 +12V IN 2 GND 4 +12V IN DC Mode ATX12V 2-26 Q370I-IM-A R3.
2.7 1. Slot PCI Express slot This slot supports a PCIe x16 graphics card that complies with the PCI Express specification.
Chapter 3 BIOS setup Scan the QR code to view the BIOS update guide. 3.1 BIOS Setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: Press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines.
3.1.1 BIOS menu screen Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system configuration Advanced For changing the advanced system settings Security For configuring the system security settings Boot For changing the system boot configuration. Save & Exit For selecting the save options and default options. Event Logs For enabling easier troubleshooting by capturing useful system information.
3.3 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.3.1 Start ASUS EzFlash This item allows you to run EzFlash utility. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. 3.3.
Unconfigure ME This item allows you to unconfigure Intel® ME by resetting the MEBx password to defualt. Configuration options: [Disabled] [Enabled] TPM Device Selection This item allows you to select the TPM device. Configuration options: [dTPM] [PTT] 3.3.3 Trusted Computing Security Device Support This item allows you to enable or disable BIOS support for security devices. Configuration options: [Disabled] [Enabled] 3.3.
SA - PCI Express DMI Link ASPM Control This item allows you to control the Active State Power Management on both CPU and PCH (platform controller hub) Both DMI link ASPM control items of the CPU and PCH sides must be enabled for the ASPM to take effect. Configuration options: [Disabled] [L0s] [L1] [L0sL1] ASPM This item allows you to control ASPM for PEG 0. This has no effect if PEG is not the currently active device. Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1] 3.3.
Hyper-threading The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two logical processors to the operating system, allowing the operating system to schedule two threads or processes simultaneously. [Enabled] [Disabled] Two threads per activated core are enabled. Only one thread per activated core is enabled. CPU Power Management Control This item allows you to manage and configure the CPU’s power.
VT-d [Disabled] Allows you to enable or disable VT-d function on MCH. Configuration options: [Enabled] [Disabled] 3.3.7 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. SATA Controller(s) Enables or disables onboard the SATA device. Configuration options: [Disabled] [Enabled] The following items appear only when you set SATA Controller(s) to [Enabled].
M.2(SOCKET3) Allow you to enable/disable the M.2(SOCKET3). Configuration options: [Disabled] [Enabled] SATA6G_3~6(Gray) Allow you to enable/disable the SATA6G_3~6 port. Configuration options: [Disabled] [Enabled] 3.3.8 Onboard Devices Configuration HD Audio Controller [Enabled] Enables the HD Audio Device. [Disabled] Disables the HD Audio Device. Intel LAN Controller [Enabled] Enables the Intel LAN controller. [Disabled] Disables the controller.
Hyper M.2X16 This item allows you to detect the SSD intalled onto the Hyper M.2 X16 card. [Enabled] Two or three SSDs installed onto the Hyper M.2 X16 card can be detected. [Disabled] Only one SSD installed onto the Hyper M.2 X16 card can be detected. The number of the SSDs that can be detected varies depending on the configurations of the PCIe X16 slots. I2C1 Controller This item allows you to enable or disable the Serial IO Controller. Configuration options: [Enabled] [Disabled] 3.3.
EDID Data Source Configuration options: [Pre-Defined] [Flat Panel Display] The following item appears when you set EDID Data Source to [Pre-Defined]. Pre - Defined LVDS Panel Type Allows you to select Pre-Defined LVDS panel used by Internal Graphics Device.
Power On By PCI-E This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCIe LAN cards. Configuration options: [Disabled] [Enabled] Power On By PS/2 Keyboard Enables or disables the system to be powered on by a PS/2 keyboard. Configuration options: [Disabled] [Enabled] Power On By PS/2 Mouse Enables or disables the system to be powered on by a PS/2 mouse.
The following item appears only when you set Serial Port to [Enabled]. Change Settings Allows you to select an optimal setting for Super I/O devices. Configuration options: [Auto] [IO=2F8h; IRQ=3;] [IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;] Serial Port 3 Configuration Serial Port Allows you to enable or disable the serial port (COM).
CPU Fan Speed Low Limit This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set the CPU fan warning speed. Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600RPM] CPU Fan Profile [Standard] This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the appropriate performance level of the CPU fan.
Chassis Fan(s) Configuration Chassis Fan1 Q-Fan Control This item allows you to set the chassis fan operating mode. [PWM Mode] Enables the Chassis Fan Q-Fan Control feature in PWM mode for 4-pin chassis fan. [DC Mode] Enables the Chassis Fan Q-Fan Control feature in DC mode for 3-pin chassis fan. [Disabled] Disables the Q-Fan control. Chassis Fan1 Q-Fan Source The assigned fan will be controlled according to the selected temperature source.
Chassis Fan1 Max. Duty Cycle (%) Use the <+> or <-> keys to adjust the maximum Chassis Fan1 duty cycle. When the temperature source reaches the upper limit, the Chassis Fan1 will operate at the maximum duty cycle. Chassis Fan1 Middle Temperature Use the <+> or <-> keys to adjust the middle limit of the Chassis Fan1 temperature. Chassis Fan1 Middle. Duty Cycle (%) Use the <+> or <-> keys to adjust the Chassis Fan1 middle duty cycle.
Redirection After POST This setting allows you to specify if Bootloader is selected than Legacy console redirection. [Always Enable] Legacy Console Redirection is enabled for Legacy OS. [Bootloader] Legacy Console Redirection is disabled before booting to Legacy OS. 3.3.15 Intel TXT Information This menu displays the Intel TXT information. 3.3.16 USB Configuration The USB Devices item lists auto-detected values. If no USB device is detected, the item shows None.
USB7-9 Allows you to enable or disable USB port. Once set to [Disabled], any USB devices plugged into the connector will not be detected by BIOS or OS. Configuration options: [Disabled] [Enabled] U32G1_10, USB_10-13 Allows you to enable or disable USB port. Once set to [Disabled], any USB devices plugged into the connector will not be detected by BIOS or OS. Configuration options: [Disabled] [Enabled] 3.3.
3.4 Security menu This menu allows a new password to be created or a current password to be changed. The menu also enables or disables the Secure Boot state and lets the user configure the System Mode state. Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. To set an administrator password: 1. Select the Administrator Password item and press . 2.
Secure Boot Secure Boot can be enabled if the system is running in User mode with enrolled platform Key (EPK) or if the CSM function is disabled. Configuration options: [Disabled] [Enabled] Key Management The Key Management item allows you to modify Secure Boot variables and set Key Management page. Restore Factory Keys Force System to User Mode. Configure NVRAM to contain OEM-defined factory default Secure Boot keys. Reset to Setup Mode Delete NVRAM content of all UEFI Secure Boot key databases.
NVMe Support This item allows you to enable or disable NVMe Support. Configuration options: [Disabled] [Enabled] VGA Support [Auto] Only installs the Legacy OpRom with Legacy OS and logo will not be shown during POST. [EFI Driver] EFI driver will still be installed with the EFI OS. USB Support [Disabled] All USB devices will NOT be available until after OS boot. [Full Initial] All USB devices will be available in OS and POST.
Quiet Boot Allows you to enable or disable the Quiet Boot option. Configuration options: [Disabled] [Enabled] Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. To select the boot device during system startup, press when ASUS Logo appears. 3.
Log System Boot Event Allows you to enbale or disable logging of the system boot event. Configuration options: [Enabled] [Disabled] MECI Configuration options: [1] - [255] METW Configuration options: [0] - [99] Log EFI Status Code Configuration options: [Disabled] [Enabled] Convert EFI Status Codes to Standard Smbios Type Configuration options: [Disabled] [Enabled] View Smbios Event Log Allows you to view all the events in the Smbios event logs. 3-22 Q370I-IM-A R3.
Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l’UE peut être téléchargée à partir du site Internet suivant : www.
Service and Support Visit our multi-language website at https://www.asus.com/support/ Manufacturer ASUSTek COMPUTER INC. Address, City 1F., No. 15, Lide Rd., Beitou Dist.