Quick Start Guide
E21362
Revised Edition V2
October 2022
Copyright © ASUSTeK Computer Inc.
All Rights Reserved
Remote Management LAN Card
IPMI expansion card
Quick Start Guide
Product specifications
Chipset
ASPEED VIDEO PROCESSOR AST2600A3-GP
Interface
PCIe 3.0 x1 interface
VGA
1 x D-sub supports max. resolution 1920 x 1200 @ 60Hz
External connectors
1 x D-Sub
1 x LAN (RJ45) port
Internal connectors
8 x fan headers
1 x 6-pin PSU connector
1 x BMC header
1 x LAN IP mode switch jumper
1 x SMART_PSU switch jumper
1 x PM_BUS header
1 x USB 2.0 connector
1 x VGA header
1 x Panel header(links to PWR/RST header of motherboard and chassis)
3 x T-sensor headers
1 x BMC switch jumper
1 x VGA switch jumper
1 x LOC switch jumper
1 x BMC Indicator LED
Accessories
1 x BMC cable
1 x Low prole bracket
1 x Power On/Off cable
1 x Reset cable
1 x USB 2.0 cable
1 x User guide
Operating System
Windows
®
10 - 64 bit, Linux OS including Cent OS, Redhat, and Ubuntu
Dimensions
6.4 inch x 2.7 inch (162mm x 68.95mm )
RTL8211F-CG 1G LAN connector
Onboard VGA header
VGA connector
Fan headers 1-8
PANEL header (connects to motherboard and chassis PANEL to control power/reset functions)
T_SENSOR headers 1-3 (for temperature measuring)
BMC header (connects to motherboard BMC header)
USB header (connects to motherboard USB 2.0 front header)
PSU PM_BUS header (connects to power supply)
6-pin PSU connector (connects to PCIE power +12V)
VGA switch jumper (to turn on/off the display; default set to On)
LOC switch jumper (keeps heartbeat LED lit up)
BMC switch jumper (turns on/off the BMC card)
SMART_PSU switch jumper (controls alert)
LAN IP mode switch jumper (controls LAN IP - Dynamic/Fixed(10.10.10.10))
Product Features Jumper configurations
Enable
(Default)
Disable
BMC_SW
21 2 3
Not fixed IP
(Default)
Fixed IP
(10.10.10.10)
DM_IP_SEL1
21 2 3
Enable Disable
(Default)
SMART_PSU
21 2 3
Enable
(Default)
Disable
VGA_SW
21 2 3
LAN IP mode switch jumper
SMART_PSU switch jumper
BMC switch jumper
VGA switch jumper
3. Connect the Power On/Off cable and Reset cables to the MB pins on the Panel header (PANEL) on
the IPMI expansion card then connect them to the Panel header on the motherboard. Ensure the
cables are connected such that the red cable is closest to the PCB.
The Power On/Off cable and Reset cable are connected in opposite orientations when connecting them to
the Panel header on your motherboard. For more information on the pin denitions of the Panel header on
your motherboard, please refer to your motherboard’s user guide.
Installing the IPMI expansion card
The cables connectors are notched to t in only one orientation. Do not force the cable connectors onto the
board headers/connectors in the incorrect orientation.
1. (on selected models) Connect the BMC cable to the BMC header (BMC_HEADER) on the IPMI
expansion card and the BMC header on your motherboard.
Only connect this header if your motherboard features a BMC_HEADER header, please refer to the user
manual that came with your motherboard package for more details.
2. To supply the IPMI expansion card with power, connect the USB 2.0 cable to the USB connector
(USB) on the IPMI expansion card and the USB 2.0 connector on your motherboard.
MB pins
CHA pins
4. Connect the Power On/Off cable and Reset cables from the chassis to the CHA pins on the Panel
header. Ensure the cables are connected such that the red cable is closest to the PCB.
5. This board features three (3) T-Sensor headers (T_SENSOR) which allow you to connect T-sensor
cables for temperature monitoring functions.
PSUSMB
7. Connect the 6-pin PCIE power connector from the PSU to the 6-pin PSU connector (PCIE_PWR).
6. Connect the PMBus connector from the PSU to the PSU PM_BUS header (PSUSMB) for monitoring
information on the PSU such as voltage, current, and temperature.
8. Insert the IPMI expansion card to a PCIe slot on your motherboard.
For more information on the IPMI card, you can scan the QR code for the user manual:
15060-17D10000
E21362_IPMI_Card_QSG_V2.indd 1-6
E21362_IPMI_Card_QSG_V2.indd 1-6
10/31/2022 5:08:22 PM
10/31/2022 5:08:22 PM