Motherboard PRIME Z370-P II
E14719 First Edition August 2018 Copyright© 2018 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information........................................................................................................ v About this guide.......................................................................................................... vi PRIME Z370-P II specifications summary............................................................... viii Package contents.......................................................................................................
3.3 My Favorites.............................................................................................. 3-12 3.4 Main menu................................................................................................. 3-14 3.5 Ai Tweaker menu...................................................................................... 3-14 3.6 Advanced menu........................................................................................ 3-15 3.6.1 Platform Misc Configuration.................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: 1. Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard. 2.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
PRIME Z370-P II specifications summary Intel® Socket 1151 for Intel® Core™ 9000 series, 8th Generation Core™ i7 / i5 / i3, Pentium® and Celeron® processors CPU Supports 14nm CPU Supports Intel® Turbo Boost Technology 2.0* * The support of these features depends on the CPU types. ** Refer to www.asus.com for the complete CPU support list. Chipset Intel® Z370 Chipset 4 x DIMM, max. 64GB DDR4 4000(O.C.)*/3866(O.C.)*/3733(O.C.)*/ 3600(O.C.)*/3466(O.C.)*/3400(O.C.)*/3333(O.C.)*/3300(O.C.)*/ 3200(O.C.
PRIME Z370-P II specifications summary Intel® CPU with Intel® Rapid Storage Technology support (RAID 0 & RAID 1) - The PCIEX16_1 slot supports up to 3 Intel® PCIe NVME SSDs via a Hyper M.2 x16 series Card.* Intel® Z370 Chipset with RAID 0, 1, 5, 10 and Intel® Rapid Storage Technology support Storage -2 x M.2 Socket 3 with M Key, type 2242/2260/2280 storage devices support (both SATA & PCIe x4 mode)** - 4 x SATA 6.0 Gb/s ports (gray) - Intel® Optane™ Memory Ready * The Hyper M.
PRIME Z370-P II specifications summary ASUS Exclusive Features - ASUS Ai Charger - ASUS AI Suite 3 EZ DIY UEFI BIOS EZ Mode ASUS Special Features - featuring a friendly graphics user interface - ASUS O.C.
PRIME Z370-P II specifications summary BIOS Features 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.1, WfM2.0, SM BIOS 3.1, ACPI 6.1, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites, Last Modified log, F12 PrintScreen, and ASUS DRAM SPD (Serial Presence Detect) memory information Manageability WfM 2.0, DMI 3.
Package contents Check your motherboard package for the following items: nual User Ma xii ASUS PRIME Z370-P II motherboard User Guide Support DVD 2 x SATA 6.0 Gb/s cables 1 x M.2 screw package 1 x I/O Shield • If any of the above items is damaged or missing, contact your retailer. • The illustrated items above are for reference only. Actual product specifications may vary with different models.
Installation tools and components Graphics card (optional) Phillips (cross) screwdriver PC chassis Power supply unit Intel® LGA1151 CPU Intel® LGA1151 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) The tools and components in the table above are not included in the motherboard package.
xiv
Product Introduction Product Introduction 1.1 Motherboard overview 1.1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.1.2 Motherboard layout 1 2 3 2 23.1cm(9.1in) 4 Chapter 1 KBMS_USB12 EATX12V DIGI+ EPU CPU_FAN AIO_PUMP CHA_FAN1 14 PCIEX1_1 15 2280 EATXPWR DDR4 DIMM_A2* (64bit, 288-pin module) 30.5cm(12.0in) 1 IRST V 2260 M.2_1(SOCKET3) CHA_FAN2 PCIE SATA V X4 AUDIO M.
Layout contents ASUS PRIME Z370-P II Page 1-14 1-13 Chapter 1 Connectors/Jumpers/Buttons and switches/Slots 1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) 2. CPU and chassis fan connectors; AIO pump connector (4-pin CPU_FAN, 4-pin CHA_FAN1-2; 4-pin AIO_PUMP) 3. LGA1151 CPU socket 4. DDR4 DIMM slots 5. USB 3.1 Gen 1 connectors (20-1 pin U31G1_12; U31G1_34) 6. M.2 sockets (M.2_1; M.2_2) 7. Intel® SATA 6 Gb/s connectors (7-pin SATA6G_1~4) 8. System panel connector (20-5 pin PANEL) 9. USB 2.
1.1.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1151 socket designed for Intel® Core™ 9000 series, 8th Generation Core™ i7 / i5 / i3, Pentium® and Celeron® processors. Chapter 1 PRIME Z370-P II CPU socket LGA1151 1-4 • Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent.
1.1.4 System memory Chapter 1 The motherboard comes with four DDR4 (Double Data Rate 4) Quad Inline Memory Modules (DIMM) slots. DIMM_A2* DIMM_A1 DIMM_B2* DIMM_B1 A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
Memory configurations You may install 4 GB, 8 GB, and 16 GB unbuffered and non‑ECC DDR4 DIMMs into the DIMM sockets. Chapter 1 You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
1.1.5 Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. PCIEX1_1 PCIEX16_1 PCIEX1_2 PCIEX16_2 PCIEX1_3 PCIE_X1_4 Slot No. Slot Description 1 PCIe 3.0/2.0 x1_1 slot 2 PCIe 3.0/2.0 x16_1 slot 3 PCIe 3.0/2.0 x1_2 slot 4 PCIe 3.0/2.0 x16_2 slot 5 PCIe 3.0/2.0 x1_3 slot 6 PCIe 3.0/2.
PCI Express 3.0 operating mode VGA configuration Chapter 1 Single VGA/PCIe card Dual VGA/PCIe card PCIe 3.0/2.0 x16_2 x16 (single VGA recommended) N/A x16 x4 • We recommend that you provide sufficient power when running CrossFireX™ mode. • Connect chassis fans to the motherboard chassis fan connectors when using multiple graphics cards for better thermal environment. Hyper M.2 X16 card configuration 3 Intel® SSD on CPU support 1-8 PCIe 3.0/2.0 x16_1 PCI Express 3.0 operating mode PCIe 3.0/2.
1.1.6 1. Jumpers Clear RTC RAM jumper (2-pin CLRTC) Chapter 1 This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. +3V_BAT GND CLRTC PIN 1 PRIME Z370-P II Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2.
1.1.7 Internal connectors 1. Intel SATA 6 Gb/s connectors (7-pin SATA6G_1~4) ® Chapter 1 These connectors connect to SATA 6 Gb/s hard disk drives via SATA 6 Gb/s signal cables. If you installed SATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology.
3. Front panel audio connector (10-1 pin AAFP) Chapter 1 SENSE2_RETUR AGND NC SENSE1_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this connector.
5. USB 3.
7. CPU and chassis fan connectors; AIO pump connector (4-pin CPU_FAN, 4-pin CHA_FAN1-2; 4-pin AIO_PUMP) A A B CPU_FAN AIO_PUMP Chapter 1 Connect the fan cables to the fan connectors on the motherboard. B D AIO PUMP PWM AIO PUMP IN AIO PUMP PWR GND GND CPU FAN PWM CPU FAN IN CPU FAN PWR C C CHA_FAN1 CHA FAN PWM CHA FAN IN CHA FAN PWR GND D CHA_FAN2 CHA FAN PWM CHA FAN IN CHA FAN PWR GND PRIME Z370-P II Fan connectors • DO NOT forget to connect the fan cables to the fan connectors.
8. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
9. System panel connector (20-5 pin PANEL) SPEAKER +5V_SPKO Ground Ground Speaker PWR_SW PLED+ PLEDPWR Ground +PWR_LED- Chapter 1 This connector supports several chassis-mounted functions. +HDD_LED- RESET PLED- PIN 1 HDD_LED+ HDD_LEDGround RESET NC PLED+ PANEL +PWR_LED- PRIME Z370-P II System panel connector • System power LED (4-pin +PWR_LED-) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
10. M.2 sockets (M.2_1; M.2_2) These sockets allow you to install M.2 SSD modules. Chapter 1 M.2_1(SOCKET3) 2280 2260 2242 M.2_2(SOCKET3) 2280 2260 2242 PRIME Z370-P II M.2 sockets • These sockets support PCIe 3.0 x4 and SATA mode M Key design and type 2242/ 2260/ 2280 storage devices. • When a device in SATA mode is installed on the M.2_1 socket, SATA_1 port cannot be used. • These sockets support IRST (Intel® Rapid Storage Technology). The M.2 SSD module is purchased separately.
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. CPU installation • Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1151 socket.
Chapter 2 2.1.2 Cooling system installation Apply the Thermal Interface Material to the CPU cooling systems and CPU before you install the cooling systems and fan, if necessary.
Chapter 2 To install a CPU heatsink and fan assembly ASUS PRIME Z370-P II 2-3
To install an AIO cooler Chapter 2 AIO_PUMP CPU_FAN The illustrations in this section are for reference only. Please refer to section 1.1.2 Motherboard Layout for the actual location of the header(s).
Motherboard installation 1. Install the ASUS I/O Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. ASUS PRIME Z370-P II Chapter 2 2.1.
3. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard.
DIMM installation Chapter 2 2.1.
2.1.5 ATX power connection OR Chapter 2 Ensure to connect the 8-pin power plug. 2.1.
2.1.7 Front I/O connector To install front panel connector To install front panel audio connector To install USB 2.0 connector Chapter 2 AAFP To install USB 3.1 Gen 1 connector USB 3.1 Gen 1 USB 2.
2.1.
M.2 installation Chapter 2 2.1.9 Supported M.2 type varies per motherboard.
2.2 Motherboard rear and audio connections 2.2.1 Rear I/O connection 1 2 7 4 5 6 3 Chapter 2 Rear panel connectors 1. PS/2 keyboard/mouse combo port 5. HDMI port 2. LAN port* 6. DVI-D port 3. Audio I/O ports** 7. USB 2.0 ports 4. USB 3.1 Gen 1 Type A ports * and **: Refer to the tables on the next page for LAN port LEDs, and audio port definitions. 2-12 • USB 3.1 Gen 1 devices can only be used as data storage only.
* LAN ports LED indications Activity Link LED Speed LED Status Description Status Description Off No link Off Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Orange (Blinking then steady) Green 10 Mbps connection ACT/LINK LED SPEED LED 1 Gbps connection Ready to wake up from S5 mode LAN port You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port’s LEDs may continue to blink even when disabled.
2.2.
Connect to 4-channel Speakers Chapter 2 Connect to 5.1-channel Speakers Connect to 7.
2.3 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: 6. a. Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 3: BIOS Setup BIOS Setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press during the Power-On Self Test (POST). If you do not press , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the hotkey for the advanced BIOS settings. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.
3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode(F7) or press the hotkey.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. For changing the basic system configuration. Main Ai Tweaker For changing the overclocking settings. Advanced For changing the advanced system settings. Monitor For displaying the system temperature, power status, and changing the fan settings. Boot For changing the system boot configuration. Tool For configuring options for special functions.
Search on FAQ Move your mouse over this button to show a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code: Hot keys This button above the menu bar contains the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings. Scroll bar A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen.
3.2.3 Q-Fan Control The Q-Fan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Chapter 3 3-8 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can also set RAID in your system using this feature. OC setup RAID setup OC Tuning To start OC Tuning: Press on your keyboard or click EZ Tuning Wizard screen. 2. Click OC then click Next. 3. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next. ASUS PRIME Z370-P II from the BIOS screen to open Chapter 3 1.
4. Select a Main Cooling system BOX cooler, Tower cooler, Water cooler, or I’m not sure, then click Next. 5. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning. Creating RAID To create RAID: 1. Press on your keyboard or click EZ Tuning Wizard screen. 2. Click RAID then click Next. 3. Chapter 3 3-10 from the BIOS screen to open • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel® SATA connectors.
Select the type of storage for your RAID, Easy Backup or Super Speed, then click Next. a. For Easy Backup, click Next then select from Easy Backup (RAID 1) or Easy Backup (RAID 10). Chapter 3 4. You can only select Easy Backup (RAID 10) if you connect four (4) HDDs. b. For Super Speed, click Next then select from Super Speed (RAID 0) or Super Speed (RAID 5). 5. After selecting the type of RAID, click Next then click Yes to continue the RAID setup. 6.
3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.
Adding items to My Favorites To add BIOS items: 1. Press on your keyboard or click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3.
3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. 3.5 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.1.
ASUS MultiCore Enhancement [Auto] This item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio This item allows you to set the CPU core ratios. Configuration options: [Auto] [Sync All Cores] [Per Core] [AI Optimized] The [AI Optimized] item appears only when you use an unlocked CPU.
3.6.2 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. CPU - Power Management Control This item allows you to manage and configure the CPU’s power. Intel(R) SpeedStep(tm) This item allows more than two frequency to be supported.
SATA Mode Selection This item allows you to set the SATA configuration. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.
Realtek LAN Controller This item allows you to enable or disable the Realtek LAN controllers. Configuration options: [Disabled] [Enabled] USB power delivery in Soft Off state (S5) [Enabled] The USB port will provide power to your devices even when the system is in Power State S5. [Disabled] Disables this function. 3.6.8 APM Configuration The items in this menu allow you to set system wake and sleep settings.
3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Q-Fan Configuration Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. AIO PUMP Control [Disabled] Disable the AIO Pump control feature. [Auto] Detects the type of AIO pump installed and automatically switches the control modes. [DC mode] Enable the AIO Pump control in DC mode for 3-pin fan.
CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. Launch CSM [Auto] The system automatically detects the bootable devices and the addon devices. [Enabled] For a better compatibility, enable the CSM to fully support the nonUEFI driver add-on devices or the Windows UEFI mode.
3.9 Tool menu The Tool menu items allow you to configure options for special functions. Select an item then press to display the submenu. 3.9.1 ASUS EZ Flash 3 Utility This item allows you to run ASUS EZ Flash 3. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.11.2 ASUS EZ Flash 3.
3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select Ok to load the default values.
3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility, and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.
3.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS‑based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. To update the BIOS by USB: Chapter 3 3-24 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash 3 Utility and press . 2.
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit menu for details. 1. Enter the Advanced Mode of the BIOS setup program.
3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the updated BIOS file. • Before using this utility, rename the BIOS file in the removable device into TZ370PG. CAP. • The BIOS file in the support DVD may not be the latest version.
Chapter 4: RAID Support RAID Support 4.1 RAID configurations 4 The motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 5 and RAID 10 configuration. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support. 4.1.1 RAID definitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks.
Chapter 4 4-2 Chapter 4: RAID Support
Appendix Appendix Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) Appendix This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Appendix Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Appendix English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées.
ASUS contact information ASUSTeK COMPUTER INC. Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com Appendix Address Telephone Fax Web site +86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 48720 Kato Rd., Fremont, CA 94538, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.
Appendix A-6 Appendix
