Motherboard PRIME X570-PRO
E17432 Revised Edition V3 October 2020 Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information........................................................................................................ v About this guide.......................................................................................................... vi PRIME X570-PRO specifications summary............................................................ viii Package contents.......................................................................................................
3.2.4 EZ Tuning Wizard........................................................................ 3-9 3.3 My Favorites.............................................................................................. 3-10 3.4 Main menu................................................................................................. 3-11 3.5 Ai Tweaker menu....................................................................................... 3-12 3.6 3.7 Advanced menu......................................
Safety information Electrical safety • To prevent electrical shock hazards, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
PRIME X570-PRO specifications summary AMD AM4 Socket for 3rd and 2nd AMD Ryzen™ /2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors CPU Supports CPU up to 16 cores* * Due to the CPU limitations, CPU cores supported vary by processor. ** Refer to www.asus.com for the AMD CPU support list. Chipset AMD X570 Chipset 3rd Gen AMD Ryzen™ Processors - 4 x DIMM, max. 128GB, DDR4 4400(O.C.)/4266(O.C.)/4133(O.C. )/4000(O.C.)/3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3400 (O.C.
PRIME X570-PRO specifications summary 3rd and 2nd Gen AMD Ryzen™ Processors - Supports NVIDIA® 2-Way SLI® Technology Multi-GPU support - Supports AMD 3-Way CrossFireX™ Technology 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors - Supports AMD 2-Way CrossFireX™ Technology 3rd Gen AMD Ryzen™ Processors - M.2_1 socket 3 with M Key, Type 2242/2260/2280/22110(PCIE 4.
PRIME X570-PRO specifications summary AMD X570 chipset - 1 x USB 3.2 Gen 2 (up to 10Gbps) front connector USB - 4 x USB 3.2 Gen 2 (up to 10Gbps) ports (3*Type A+1*Type C at back panel) - 2 x USB 3.2 Gen 1 (up to 5Gbps) ports (2 ports at mid-board) - 4 x USB 2.
PRIME X570-PRO specifications summary ASUS SafeSlot - Protect your graphics card Investment ASUS 5X Protection III - ASUS SafeSlot Core - Fortified PCIe with solid soldering -A SUS LANGuard - Protects against LAN surges, lightning strikes and static-electricity discharges! Special Features -A SUS Overvoltage Protection - World-class circuit-protecting power design - ASUS DIGI+ VRM - Digital power design with DrMOS -A SUS DRAM Overcurrent Protection: Enhanced DRAM overcurrent protection -A SUS Stain
PRIME X570-PRO specifications summary 1 x Front panel audio connector (AAFP) 1 x SPI_TPM connector 1 x COM connector 1 x 24-pin EATX Power connector 1 x 8-pin EATX 12V Power connector Internal I/O Ports 1 x 4-pin EATX 12V Power connector 1 x System Panel Connector 1 x Clear CMOS header 1 x Node Connector 1 x Power-on button 1 x T_Sensor Header BIOS 256 Mb Flash ROM, UEFI AMI BIOS, PnP, SM BIOS 3.2, ACPI 6.
Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit AMD AM4 CPU AMD AM4/AM3 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
xiv
Product Introduction Product Introduction 1.1 Motherboard overview 1.1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.1.2 Motherboard layout 1 2 3 Chapter 1 24.4cm(9.6in) 4 5 3 6 CPU_FAN AIO_PUMP RGB_HEADER1 KBMS _U32G1 _910 EATX12V_1 PLUG_8PIN_PWR1 EATX12V_2 23 CPU_OPT BOOT_DEVICE_LED VGA_LED CPU_LED DRAM_LED DIGI +VRM 7 RGB_HEADER2 EATXPWR PWR_SW 22110 U32G2_C11 M.2_1(SOCKET3) CHA_FAN1 SPI_TPM 256Mb BIOS 22 2280 2260 2242 5 8 30.
Layout contents ASUS PRIME X570-PRO Page 1-18 Chapter 1 Connectors/Jumpers/Buttons and switches/Slots 1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V; 4-pin EATX 12V;) 2. LED connector (13-pin LED_CON) 3. CPU, CPU optional, and chassis fan connectors; water pump+, and AIO pump connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN1-3; 4-pin W_PUMP+, 4-pin AIO_PUMP) 4. AM4 CPU socket 5. AURA RGB headers (4-pin RGB_HEADER1-2) 6. DDR4 DIMM slots 7. Q LEDs 8. Power-on button (PWR_SW) 9. USB 3.
1.1.3 Central Processing Unit (CPU) The motherboard comes with an AM4 socket designed for 3rd and 2nd AMD Ryzen™ /2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors up to 16 cores. Chapter 1 PRIME X570-PRO CPU socket AM4 The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
DIMM_B2* DIMM_A2* DIMM_A2* Chapter 1 Recommended memory configurations DIMM_B1 DIMM_B2* DIMM_A1 DIMM_A2* Memory configurations You may install 2 GB, 4 GB, 8 GB, 16 GB and 32 GB unbuffered DDR4 DIMMs into the DIMM sockets. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module.
1.1.5 Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. PCIEX16_1 PCIEX1_1 PCIEX1_2 PCIEX16_2 PCIEX1_3 PCIEX16_3 Slot No. 1-6 Slot Description 1 PCIe 4.0 / 3.0 x16_1 slot 2 PCIe 4.0 x1_1 slot 3 PCIe 4.0 x1_2 slot 4 PCIe 4.0 / 3.0 x16_2 slot 5 PCIe 4.0 x1_3 slot 6 PCIe 4.
3rd Gen AMD Ryzen™ Processors PCIe operating mode PCIe 4.0 x16_1 PCIe 4.0 x16_2 Single VGA/PCIe card x16 N/A Dual VGA/PCIe card x8 x8 Chapter 1 VGA Configuration 2nd Gen AMD Ryzen™ Processors VGA Configuration PCIe operating mode PCIe 3.0 x16_1 PCIe 3.0 x16_2 Single VGA/PCIe card x16 N/A Dual VGA/PCIe card x8 x8 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors VGA Configuration Single VGA/PCIe card PCIe 3.
1.1.6 1. Onboard LEDs Q LEDs (BOOT_LED, VGA_LED, DRAM_LED, CPU_LED) Chapter 1 Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found, the corresponding LED remains lit until the problem is solved. This user-friendly design provides an intuitive way to locate the root problem within seconds.
1.1.7 1. Headers Clear RTC RAM jumper (2-pin CLRTC) Chapter 1 This jumper allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. +3V_BAT GND CLRTC PIN 1 PRIME X570-PRO Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4.
2. AURA RGB headers (4-pin RGB_HEADER1-2) These connectors are for RGB LED strips. A Chapter 1 RGB_HEADER1 PIN 1 A B +12V G R B B RGB_HEADER2 B R G +12V PIN 1 PRIME X570-PRO RGB_HEADER connectors The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3 m. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply.
3. Addressable RGB Gen 2 header (4-1 pin ADD_GEN2) Chapter 1 This connector is for individually addressable RGB WS2812B LED strips or WS2812B based LED strips.
1.1.8 1. Internal connectors Front panel audio connector (10-1 pin AAFP) SENSE2_RETUR AGND NC SENSE1_RETUR Chapter 1 This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this connector.
3. AMD Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. SATA6G_1 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND SATA6G_3 GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXN3 RSATA_RXP3 GND SATA6G_5 GND RSATA_TXP5 RSATA_TXN5 GND RSATA_RXN5 RSATA_RXP5 GND Chapter 1 If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, and RAID 10 configuration through the onboard AMD X570 chipset.
4. USB 3.2 Gen 2 (up to 10Gbps) front panel connector (U32G2_C11) Chapter 1 This connector allows you to connect a USB 3.2 Gen 2 module for additional USB 3.2 Gen 2 ports. The latest USB 3.2 Gen 2 connectivity provides data transfer speeds of up to 10 Gbps. The next-generation standard is completely backward-compatible with your existing USB devices. U32G2_C11 SBU2 SBU1 CC1 VBUS RX1RX1+ GND TX1TX1+ VBUS VBUS TX2+ TX2GND RX2+ RX2GND DD+ CC2 PRIME X570-PRO USB3.2 Gen2 front panel connector 5. USB 3.
6. USB 2.0 connectors (10-1 pin USB12; USB34) PIN 1 USB+5V USB_P2USB_P2+ GND USB+5V USB_P4USB_P4+ GND PIN 1 USB+5V USB_P1USB_P1+ GND NC USB12 USB+5V USB_P3USB_P3+ GND NC USB34 Chapter 1 These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mb/s connection speed. PRIME X570-PRO USB2.
8. System panel connector (20-5 pin PANEL) This connector supports several chassis-mounted functions. Chapter 1 +5V Ground Ground Speaker PLED+ PLEDPWRBTN# GND PLED PWRSW SPEAKER PANEL PLED- HDD_LED+ HDD_LEDGround RSTCON# NC PLED+ PIN 1 HDD_LED RESET PLED PRIME X570-PRO System panel connector • System power LED (2-pin or 3-1 pin PLED) The 2-pin or 3-1 pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
9.
10. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V; 4-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
12. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. PIN 1 DCD TXD GND RTS RI RXD DTR DSR CTS Chapter 1 COM PRIME X570-PRO Serial port (COM) connector The COM module is purchased separately. 13. LED connector (13-pin LED1_CON) The LED connector is for connecting an RGB Card under the rear I/O cover.
14. Node connector (12-1 pin NODE) This connector allows you to connect a compatible PSU. Chapter 1 NODE PIN 1 PRIME X570-PRO Node connector Visit https://www.asus.com for more information about the devices and latest compatibility list. 15. Power-on button (PWR_SW) The motherboard comes with a power-on button that allows you to power up or wake up the system.
16. M.2 sockets (M.2_1; M.2_2) These sockets allow you to install M.2 SSD modules. Chapter 1 A M.2_1(SOCKET3) 22110 2280 2260 2242 B M.2_2(SOCKET3) A B 22110 2280 2260 2242 PRIME X570-PRO M.2 sockets • For 3rd Gen AMD Ryzen™ Processors, the M.2_1 socket supports PCIe 4.0 x4 mode and SATA mode M Key design and type 2242 / 2260 / 2280 / 22110 storage devices. • For 2nd Gen AMD Ryzen™/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors, the M.2_1 socket supports PCIe 3.
17. 8-pin Plug Power LED The 8-pin Power Plug LED lights up to indicate that the 8-pin power plug is not connected. Chapter 1 PLUG_8PIN_LED PRIME X570-PRO PLUG_8PIN_LED 1-22 • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or both the 8-pin and 4-pin power plugs.
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 2.1.1 CPU installation ASUS PRIME X570-PRO Chapter 2 The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
2.1.2 Cooling system installation Apply the Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary.
Chapter 2 CPU heatsink and fan assembly Type 2 When using this type of CPU fan, remove the screws and the retention module only. Do not remove the plate on the bottom.
To install an AIO cooler Chapter 2 AIO_PUMP CPU_FAN CPU_OPT 2-4 Chapter 2: Basic Installation
Motherboard installation 1. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. 2. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 2.1.3 DO NOT over tighten the screws! Doing so can damage the motherboard.
2.1.
2.1.5 ATX power connection Chapter 2 A B OR AND • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or both the 8-pin and 4-pin power plugs.
2.1.
2.1.7 Front I/O connector To install the front panel connector To install USB 3.2 Gen 2 connector USB 3.2 Gen 2 To install USB 3.2 Gen 1 connector Chapter 2 This connector will only fit in one orientation. Push the connector until it clicks into place. To install USB 2.0 connector USB 3.2 Gen 1 USB 2.
2.1.
2.1.9 M.2 installation Supported M.2 type varies per motherboard. Chapter 2 M.
M.
2.2 Motherboard rear and audio connections 2.2.1 Rear I/O connection 2 7 9 3 8 4 7 6 5 Chapter 2 1 Rear panel connectors 1. PS/2 keyboard/ mouse combo port 2. DisplayPort 3. USB 3.2 Gen 2 (up to 10Gbps) ports 4. LAN (RJ-45) port* 5. Audio I/O ports** 6. Optical S/PDIF OUT port 7. USB 3.2 Gen 1 (up to 5Gbps) ports 8. USB 3.2 Gen 2 (up to 10Gbps) port (Type-C) 9. HDMI port * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions. • USB 3.
* LAN ports LED indications Activity Link LED ACT/LINK SPEED LED LED Speed LED Status Description Status Description Off No link Off Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Orange (Blinking then steady) Green 10 Mbps connection LAN port 1 Gbps connection Ready to wake up from S5 mode ** Audio 2, 4, 6 or 8-channel configuration Chapter 2 Port Light Blue Lime Pink Orange Black 2-14 Headset 2-channel Line In Line Out Mic In – – 4-channel 6-channel 8-chan
2.2.
Connect to 4-channel Speakers Connect to 6-channel Speakers Chapter 2 Connect to 8-channel Speakers 2-16 Chapter 2: Basic Installation
2.3 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 3: BIOS Setup BIOS Setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS Setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS Setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the hotkey for the advanced BIOS settings. The default screen for entering the BIOS Setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.
3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode(F7) or press the hotkey.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings.
EZ Tuning Wizard(F11) This button above the menu bar allows you to view and tweak the overclocking settings of your system. Refer to section 3.2.4 EZ Tuning Wizard for more information. AURA (F4) This button allows you to turn the RGB LED lighting on or off. [All On] All RGB LEDs and functional LEDs will be enabled. (Default mode) [Stealth] All LEDs will be disabled. [Aura Only] All RGB LEDs will be enabled, while functional LEDs will be disabled.
Configuration fields These fields show the values for the menu items. If an item is user-configurable, you can change the value of the field opposite the item. You cannot select an item that is not user-configurable. A configurable field is highlighted when selected. To change the value of a field, select it and press to display a list of options. Last Modified button This button shows the items that you last modified and saved in BIOS Setup. 3.2.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Chapter 3 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. OC setup OC Tuning To start OC Tuning: Press on your keyboard or click EZ Tuning Wizard screen, and then click Next. from the BIOS screen to open 2. Select a PC scenario Daily Computing or Gaming/Media Editing, and then click Next. Chapter 3 1.
3. Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not sure, then click Next. 4. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning. 3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.
Adding items to My Favorites To add BIOS items: 1. Press on your keyboard or click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3.
3.5 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Memory Frequency This item allows you to set the memory operating frequency. The configurable options vary with the BCLK (base clock) frequency setting.
Performance Bias This item adjust settings to improve performance for different software. Configuration options: [Auto] [None] [CB15] [Aida/Geekbench] [CB11.5] 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.6.1 AMD fTPM Configuration The items in this menu allow you to configure the AMD fTPM settings. 3.6.
3.6.3 NB Configuration NB Configuration function varies based on the CPU installed. Primary Video Device Selects the primary display device. Configuration options: [IGFX Video] [PCIE Video] 3.6.4 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. SATA Port Enable This item allows you to enable or disable the SATA Device.
3.6.5 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio Controller This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] PCIEX16_2 Bandwidth This item displays varies based on the CPU installed. [X8 Mode] The PCIe x16_2 slot runs at x8 mode. [PCIe RAID Mode] T he Hyper M.2 x16 card and other add-on M.
3.6.6 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss.
3.6.9 HDD/SSD SMART Information This menu displays the SMART information of the connected devices. NVM Express devices do not support SMART information. 3.6.10 Network Stack Configuration The items in this menu allow you to enable or disable the UEFI network stack 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. 3.7.1 Q-Fan Configuration The subitems in this menu allow you to configure the Q-Fan features.
3.8.2 CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. 3.8.3 Secure Boot This item allows you to configure the Windows Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST. Boot Option Priorities These items specify the boot device priority sequence from the available devices.
Profile Name This item allows you to key in a profile name. Save to Profile This item allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a profile number from one to eight, press , and then select Yes. Load/Save Profile from/to USB Drive This item allows you to load or save profile from your USB drive, load and save profile to your USB drive. 3.9.3 ASUS SPD Information This item allows you to view the DRAM SPD information. 3.9.
3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.
3.11.2 ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update to the BIOS without using an OS‑based utility. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. To update the BIOS: • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.
3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.
Appendix Appendix Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) Appendix This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Appendix Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Appendix English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées.
ASUS contact information ASUSTeK COMPUTER INC. Technical Support Telephone Online support 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 https://www.asus.com Appendix Address Telephone Fax Web site +86-21-38429911 https://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 48720 Kato Rd., Fremont, CA 94538, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site https://www.asus.
Appendix A-6 Appendix
