Motherboard PRIME X570-P
E17441 Revised Edition V3 October 2020 Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information........................................................................................................ v About this guide.......................................................................................................... vi PRIME X570-P specifications summary.................................................................. viii Package contents.......................................................................................................
3.3 My Favorites................................................................................................ 3-9 3.4 Main menu................................................................................................. 3-11 3.5 Ai Tweaker menu....................................................................................... 3-11 3.6 3.7 Advanced menu........................................................................................ 3-12 3.6.1 AMD fTPM Configuration...............
Safety information Electrical safety • To prevent electrical shock hazards, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
PRIME X570-P specifications summary AMD AM4 Socket for 3rd and 2nd Gen AMD Ryzen™/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors CPU Supports CPU up to 16 cores* * Due to the CPU limitations, CPU cores supported vary by processor. ** Refer to www.asus.com for the AMD CPU support list. Chipset AMD X570 Chipset 3rd Gen AMD Ryzen™ Processors - 4 x DIMM, max. 128GB, DDR4 4400(O.C.)/4266(O.C.)/4133(O.C. )/4000(O.C.)/3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3400 (O.C.
PRIME X570-P specifications summary 3rd Gen AMD Ryzen™ Processors - M.2_1 socket 3 with M Key, Type 2242/2260/2280 (PCIE 4.0 x4 and SATA modes) storage devices support 2nd Gen AMD Ryzen™/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors Storage - M.2_1 socket 3 with M Key, Type 2242/2260/2280 (PCIE 3.0 x4 and SATA modes) storage devices support AMD X570 Chipset - M.2_2 socket 3 with M Key, Type 2242/2260/2280/22110 (PCIE 4.0 x4 and SATA modes) storage devices support - 6 x Serial ATA 6.
PRIME X570-P specifications summary - ASUS DRAM Overcurrent Protection: Enhanced DRAM overcurrent protection - ASUS Stainless-Steel Back I/O: 3X corrosion-resistance for greater durability! - ASUS ESD Guards - Enhanced ESD protection ASUS SafeSlot - Protect your graphics card Investment Armoury Crate Visual Beauty - Aura Control - Aura RGB Strip Headers - Addressable Gen 2 Header ASUS Exclusive Features - OptiMem - ASUS AI Charger ASUS Unique Features - ASUS AI Suite 3 - EPU Superb performance UEFI BIOS -
PRIME X570-P specifications summary 2 x USB 3.2 Gen 1 (up to 5Gbps) connectors support additional 4 USB 3.2 Gen 1 ports 2 x USB 2.0/1.1 connectors support additional 3 USB 2.0/1.1 ports 1 x M.2_1 Socket 3 for M Key, type 2242/2260/2280 devices support (both SATA & PCIE mode) 1 x M.2_2 Socket 3 for M Key, type 2242/2260/2280/22110 devices support (both SATA & PCIE mode) 6 x SATA 6.
PRIME X570-P specifications summary Package contents Check your motherboard package for the following items. Motherboard 1 x PRIME X570-P 2 x SATA 6 Gb/s cables Cables 1 x Addressable RGB header extension cable Accessories 1 x IO Shield 1 x M.2 screw package Application DVD Motherboard support DVD Documentation User guide If any of the above items are damaged or missing, contact your retailer.
Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit AMD AM4 CPU AMD AM4/AM3 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
xiv
Product Introduction Product Introduction 1.1 Motherboard overview 1.1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.1.2 Motherboard layout 1 2 3 4 24.4cm(9.6in) 5 2 6 Chapter 1 CPU_FAN RGB_HEADER1 CHA_FAN2 KBMS _USB78 EATX12V_2 EATX12V_1 DIGI +VRM ADD_GEN 2 30.
Layout contents ASUS PRIME X570-P Page 1-17 Chapter 1 Connectors/Jumpers/Buttons and switches/Slots 1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V; 4-pin EATX 12V;) 2. CPU and chassis fan connectors; AIO pump connector (4-pin CPU_FAN, 4-pin CHA_FAN1-3; 4-pin AIO_PUMP) 3. SPI_TPM connector (14-1 pin SPI_TPM) 4. AM4 CPU socket 5. AURA RGB headers (4-pin RGB_HEADER1-2) 6. DDR4 DIMM slots 7. Addressable Gen 2 header (4-1pin ADD_GEN 2) 8. USB 3.
1.1.3 Central Processing Unit (CPU) The motherboard comes with an AM4 socket designed for 3rd and 2nd Gen AMD Ryzen™/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors up to 16 cores. Chapter 1 PRIME X570-P CPU socket AM4 The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
DIMM_B2* DIMM_A2* DIMM_A2* Chapter 1 Recommended memory configurations DIMM_B1 DIMM_B2* DIMM_A1 DIMM_A2* Memory configurations You may install 2 GB, 4 GB, 8 GB, 16 GB and 32 GB unbuffered DDR4 DIMMs into the DIMM sockets. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module.
1.1.5 Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. PCIEX1_1 PCIEX16_1 PCIEX16_2 PCIEX1_2 PCIEX1_3 Slot No. 1-6 Slot Description 1 PCIe 4.0 x1_1 slot 2 PCIe 4.0/3.0 x16_1 slot 3 PCIe 4.0 x16_2 slot 4 PCIe 4.0 x1_2 slot 5 PCIe 4.
3rd Gen AMD Ryzen™ Processors PCIe operating mode PCIe 4.0 x16_1 PCIe 4.0 x16_2 Single VGA/PCIe card x16 N/A Dual VGA/PCIe card x16 x4 Chapter 1 VGA Configuration 2nd Gen AMD Ryzen™ Processors VGA Configuration PCIe operating mode PCIe 3.0 x16_1 PCIe 4.0 x16_2 Single VGA/PCIe card x16 N/A Dual VGA/PCIe card x16 x4 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors VGA Configuration PCIe operating mode PCIe 3.0 x16_1 PCIe 4.
1.1.6 1. Headers Clear RTC RAM jumper (2-pin CLRTC) Chapter 1 This jumper allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. +3V_BAT GND CLRTC PIN 1 PRIME X570-P Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4.
2. AURA RGB headers (4-pin RGB_HEADER1-2) These connectors are for RGB LED strips. Chapter 1 A RGB_HEADER1 A PIN 1 +12V G R B B RGB_HEADER2 PIN 1 +12V G R B B PRIME X570-P RGB_HEADER connectors The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3 m. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply.
3. Addressable RGB Gen 2 header (4-1 pin ADD_GEN 2) This connector is for individually addressable RGB WS2812B LED strips or WS2812B based LED strips.
1.1.7 1. Internal connectors Front panel audio connector (10-1 pin AAFP) Chapter 1 SENSE2_RETUR AGND NC SENSE1_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this connector.
3. AMD Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. Chapter 1 If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, and RAID 10 configuration through the onboard AMD X570 chipset.
4. USB 3.2 Gen 1 (up to 5Gbps) connectors (20-1 pin U32G1_12, U32G1_34) B B U32G1_34 PIN 1 IntA_P2_D+ IntA_P2_DGND IntA_P2_SSTX+ IntA_P2_SSTXGND IntA_P2_SSRX+ IntA_P2_SSRXVbus GND IntA_P1_D+ IntA_P1_DGND IntA_P1_SSTX+ IntA_P1_SSTXGND IntA_P1_SSRX+ IntA_P1_SSRXVbus A A U32G1_12 Chapter 1 These connectors allow you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 front or rear panel ports. With an installed USB 3.2 Gen 1 module, you can enjoy all the benefits of USB 3.
5. USB 2.0 connectors (10-1 pin USB910; USB11) USB11 PIN 1 USB+5V USB_P10USB_P10+ GND USB+5V USB_P9USB_P9+ GND NC USB+5V USB_P11USB_P11+ GND NC USB910 PIN 1 NC NC NC NC Chapter 1 These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mb/s connection speed. PRIME X570-P USB 2.
6. System panel connector (20-5 pin PANEL) Chapter 1 This connector supports several chassis-mounted functions. +5V Ground Ground Speaker PLED+ PLEDPWRBTN# GND PLED PWRSW SPEAKER PANEL PLED- HDD_LED+ HDD_LEDGround RSTCON# NC PLED+ PIN 1 HDD_LED RESET PLED PRIME X570-P System panel connector • System power LED (2-pin or 3-1 pin PLED) The 2-pin or 3-1 pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
7. CPU and chassis fan connectors; AIO pump connector (4-pin CPU_FAN, 4-pin CHA_FAN1-3; 4-pin AIO_PUMP) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
8. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V; 4-pin EATX12V) A B EATXPWR +12V DC +12V DC +12V DC +12V DC +12V DC +12V DC A EATX12V_2 EATX12V_1 B PIN 1 GND GND GND GND GND GND PIN 1 +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND +5 Volts GND +5 Volts GND +3 Volts +3 Volts Chapter 1 These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation.
10. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. PIN 1 DCD TXD GND RTS RI RXD DTR DSR CTS Chapter 1 COM PRIME X570-P Serial port (COM) connector The COM module is purchased separately. 11. Digital audio connector (4-1 pin SPDIF_OUT) SPDIFOUT GND +5V This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.
12. M.2 sockets (M.2_1; M.2_2) These sockets allow you to install M.2 SSD modules. Chapter 1 A M.2_1(SOCKET3) 2280 2260 2242 B M.2_2(SOCKET3) A B 22110 2280 2260 2242 PRIME X570-P M.2 sockets • For 3rd Gen AMD Ryzen™ Processors, the M.2_1 socket supports PCIe 4.0 x4 mode and SATA mode M Key design and type 2242 / 2260 / 2280 storage devices. • For 2nd Gen AMD Ryzen™/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors, the M.2_1 socket supports PCIe 3.
Chapter 1 1-20 Chapter 1: Product Introduction
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 2.1.1 Motherboard installation Install the ASUS I/O Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. Chapter 2 1.
3. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard.
2.1.2 CPU installation The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
2.1.3 Cooling system installation Apply the Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary.
Chapter 2 CPU heatsink and fan assembly Type 2 When using this type of CPU fan, remove the screws and the retention module only. Do not remove the plate on the bottom.
To install an AIO cooler Chapter 2 AIO_PUMP CPU_FAN 2-6 Chapter 2: Basic Installation
DIMM installation Chapter 2 2.1.
2.1.5 ATX power connection A Chapter 2 B OR 2-8 AND • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or both the 8-pin and 4-pin power plugs.
2.1.
2.1.7 Front I/O connector To install the front panel connector To install front panel audio connector AAFP Chapter 2 To install USB 3.2 Gen 1 connector To install USB 2.0 connector USB 3.2 Gen 1 USB 2.
2.1.
2.1.9 M.2 installation Supported M.2 type varies per motherboard.
2.2 Motherboard rear and audio connections 2.2.1 Rear I/O connection 2 3 7 4 5 3 6 Chapter 2 1 Rear panel connectors 1. PS/2 keyboard/ mouse combo port 2. USB 3.2 Gen 1 (up to 5Gbps) ports 3. USB 3.2 Gen 2 (up to 10Gbps) ports 4. HDMI port 5. LAN (RJ-45) port* 6. Audio I/O ports** 7. USB 2.0 ports * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions. • The USB ports under the LAN port can run at USB 3.
* LAN ports LED indications Activity Link LED ACT/LINK SPEED LED LED Speed LED Status Description Status Description Off No link Off Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Orange (Blinking then steady) Green 10 Mbps connection LAN port 1 Gbps connection Ready to wake up from S5 mode ** Audio 2, 4, 6 or 8-channel configuration Chapter 2 Port Light Blue Lime Pink Lime (Front Panel) 2-14 Headset 2-channel Line In Line Out Mic In 4-channel 6-channel 8-ch
2.2.
Connect to 4-channel Speakers Connect to 6-channel Speakers Chapter 2 Connect to 8-channel Speakers 2-16 Chapter 2: Basic Installation
2.3 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 2 2-18 Chapter 2: Basic Installation
Chapter 3: BIOS Setup BIOS Setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS Setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS Setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the hotkey for the advanced BIOS settings. The default screen for entering the BIOS Setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.
3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode(F7) or press the hotkey.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings.
AURA(F4) This button allows you to turn the RGB LED lighting on or off. [All On] All RGB LEDs and functional LEDs will be enabled. (Default mode) [Stealth] All LEDs will be disabled. [Aura Only] All RGB LEDs will be enabled, while functional LEDs will be disabled. [Aura Off] All RGB LEDs will be disabled, while functional LEDs will be enabled.
3.2.3 Q-Fan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Chapter 3 3-8 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. ASUS PRIME X570-P Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.
Adding items to My Favorites To add BIOS items: 1. Press on your keyboard or click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3.
3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. 3.5 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.1.
Custom CPU Core Ratio Allows you to select the CPU core ratio to achieve the desired CPU internal frequency. Configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set the core ratio parameters. The items in this menu may vary based on the CPU installed. OC Tuner Allows you to automatically overclock the frequency and voltage of the CPU and DRAM.
SMT Mode This item allows you enable or disable simultaneous multithreading. Configuration options: [Disabled] [Auto] Core Leveling Mode This item allows you to change the number of compute unit in the system. Configuration options: [Automatic mode] [One Computer Unit] 3.6.3 NB Configuration NB Configuration function varies based on the CPU installed. Primary Video Device Selects the primary display device. Configuration options: [IGFX Video] [PCIE Video] 3.6.
Hot Plug These items allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 3.6.5 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio Controller This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] PCIEX16_1 Bandwidth This item displays varies based on the CPU installed. [X8 Mode] The PCIe x16_1 slot runs at x8 mode.
ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss.
3.6.9 HDD/SSD SMART Information This menu displays the SMART information of the connected devices. NVM Express devices do not support SMART information. 3.6.10 Network Stack Configuration The items in this menu allow you to enable or disable the UEFI network stack 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. 3.7.1 Q-Fan Configuration The subitems in this menu allow you to configure the Q-Fan features.
3.8.2 CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. 3.8.3 Secure Boot This item allows you to configure the Windows Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST. Boot Option Priorities These items specify the boot device priority sequence from the available devices.
Profile Name This item allows you to key in a profile name. Save to Profile This item allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a profile number from one to eight, press , and then select Yes. Load/Save Profile from/to USB Drive This item allows you to load or save profile from your USB drive, load and save profile to your USB drive. 3.9.3 ASUS SPD Information This item allows you to view the DRAM SPD information. 3.9.
3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.
3.11.2 ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update to the BIOS without using an OS‑based utility. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. To update the BIOS: • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.
3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.
Chapter 3 3-22 Chapter 3: BIOS Setup
Appendix Appendix Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) Appendix This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Appendix Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Appendix English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées.
ASUS contact information ASUSTeK COMPUTER INC. Technical Support Telephone Online support 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 https://www.asus.com Appendix Address Telephone Fax Web site +86-21-38429911 https://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 48720 Kato Rd., Fremont, CA 94538, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site https://www.asus.
Appendix A-6 Appendix
