PE1000N Series Embedded Computer User Manual
E20173 First Edition August 2022 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual..............................................................................................................5 Conventions used in this manual.......................................................................................... 6 Package contents...............................................................................................................7 Chapter 1: Getting to know your Embedded Computer 1.1 Features.......................................................
3.10 Mounting to a surface (optional).......................................................................51 3.11 Installing DIN rail clips (optional).......................................................................52 3.12 Installing the terminal block (optional)............................................................53 Chapter 4: Setting up your Embedded Computer 4.1 Requirements............................................................................................................56 4.
About this manual This manual provides information about the hardware and software features of your Embedded Computer, organized through the following chapters: Chapter 1: Getting to know your Embedded Computer This chapter details the hardware components of your Embedded Computer. Chapter 2: Using your Embedded Computer This chapter provides you with information on using your Embedded Computer.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and prevent damage to your Embedded Computer's data and components.
Package contents Your Embedded Computer package contains the following items: PE1000N Series Terminal blocks Terminal block power adapter I/O port dust covers Wall mount kit with two (2) brackets PE Series 7
Optional items LTE antennas Wi-Fi antennas GPS antenna DIN rail clips NOTE: • Some bundled accessories may vary depending on the model. For details on these accessories, refer to their respective user manuals. • Illustrations of the device and accessories are for reference only. Actual product specifications may vary depending on the model.
Getting to know your Embedded Computer 1
1.1 Features 1.1.1 Front view Power input The supplied terminal block power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Embedded Computer. WARNING! The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body. Cellular Signal LED The cellular signal LED indicates whether the Embedded Computer is connected to a cellular network.
Wi-Fi Signal LED The Wi-Fi signal LED indicates whether the Embedded Computer is connected to a wireless network. Serial (COM/CAN) Signal LED Each numbered LED indicates whether a device that is connected to the corresponding serial (COM/CAN) port on the back panel is communicating through the serial bus. Power button The power button allows you to turn the Embedded Computer on or off.
LAN port LED indications ACT/LINK LED SPEED LED LAN port Activity Link LED Speed LED Status Description Status Description Off No link Off 10 Mbps connection Yellow Linked Orange 100 Mbps connection Yellow (blinking) Data activity Green 1 Gbps connection Yellow (blinking then Ready to wake steady) up from suspend mode Functional Earth Ground The Functional Earth Ground provides you with a grounding point.
1.1.
Isolated DIO connector The Isolated Digital Input/Output (DIO) connector provides electrical isolation (up to 2500 VDC) of digital input and output signals, which allow micro controllers to detect and output logic states. The high voltage protection can be used in industrial level uses. Please refer to the illustration below for the Isolated DIO connector’s pin definitions.
Serial (COM) connector The 9-pin RS232/422/485 serial (COM) connector allows you to connect devices that have serial ports, such as bar code scanner, modem, or printers. Please refer to the table below for the pin definitions of the different COM connectors. NOTE: Default set to RS-232.
Serial (COM) connector (on selected models only) The 9-pin CAN Bus serial (COM) connector allows you to connect devices that have serial ports, such as bar code scanner, modem, or printers. Please refer to the table below for the pin definitions of the different COM connectors.
LTE wireless antenna jack The LTE antenna jack allows you to connect a wireless antenna to enhance LTE signals. NOTE: The LTE wireless antenna is optional and may not come bundled. WLAN Wireless antenna jack The Wi-Fi wireless antenna jack allows you to connect a wireless antenna for Wi-Fi signals. NOTE: The Wi-Fi wireless antenna is optional and may not come bundled. GPS Wireless antenna jack The GPS wireless antenna jack allows you to connect a wireless antenna for GPS signals.
1.1.3 Left view NOTE: The features on this side are covered with a metal cover. Ensure to remove and replace the metal cover when accessing these features. For more information on removing and replacing the metal cover, refer to Installing a nano SIM card or Installing a microSD card. MicroSD card slot This slot allows you to insert a microSD card. NOTE: The microSD card slot is hot swappable.
Flash (USB 2.0 micro USB) port This flash (micro USB) port allows you to connect to a host computer to flash the OS image. Nano SIM card slot This slot allows you to insert a Nano SIM card. Force recovery pinhole The hard reset pinhole allows you to put your Embedded Computer into Force Recovery Mode to update or flash the OS.
1.1.4 Right view Expansion slot This slot allows you to install an ASUS Expansion Module (AEM) for additional I/O ports. NOTE: Contact your ASUS sales representative for more information on AEMs.
1.2 Motherboard Overview 1.2.1 Motherboard layout The PE1000N Series is an Embedded Computer based on a 3.5” motherboard. Refer to the table for the page numbers of the numbered items. 3.5” motherboard DIO COM1 COM2 CAN BATT_CON SD_CARD USB_DEBUG M.2_E MPCIE USB_FLASH M.
Layout contents Page 3.5” motherboard 1. USB 2.0 connector 23 2. M.2 (M-key) slot 23 3. M.2 Wi-Fi (E-key) slot 24 4. mPCIe slot 24 5. RTC Battery connector 25 6.
1.2.2 1. Internal connectors USB 2.0 connector The USB 2.0 connector allows you to connect a USB module for additional USB 2.0 ports. The USB 2.0 connector provides data transfer speeds of up to 480 MB/s connection speed. 2. M.2 (M-key) slot The M.2 slot allows you to install an M-key (PCIe, I2C and SMBus), type 2242/2260/2280 M.2 device, such as an M.2 SSD module. M2_M NOTE: The M.2 SSD module is purchased separately.
3. M.2 Wi-Fi (E-key) slot The M.2 Wi-Fi slot allows you to install an E-key (PCIe, USB 2.0, I2C and PCM), type 2230 M.2 Wi-Fi module. M2_E NOTE: The M.2 Wi-Fi module is purchased separately. 4. Mini PCIe slot The Mini PCIe slot allows you to install an LTE mPCIe (USB 2.0) module. MPCIE NOTE: The LTE mPCIe module is purchased separately.
5. RTC Battery connector The RTC Battery connector allows you to connect a lithium CMOS battery. GND VBAT BATT_CON 6. SO-DIMM slot The SO-DIMM slot comes with an NVIDIA® Jetson™ System-on-Module (SOM) already installed.
PE Series
Using your Embedded Computer 2
2.1 Getting started 2.1.1 Connect the AC power adapter to your Embedded Computer To connect the AC power adapter to your Embedded Computer: A. Connect the power cord to the AC power adapter. B. Connect the AC power adapter to the terminal block power adapter. C. Connect the 2-pin terminal block DC power connector into your Embedded Computer’s power (DC) input. D. Plug the AC power adapter into a 100 V~240 V power source.
IMPORTANT! • We strongly recommend that you use only UL-certified power adapters and cables that meet the following requirements or ones that you purchased as an option with your Embedded Computer. 65 W Power adapter Input voltage: 100-240 Vac Input frequency: 50-60 Hz Rated output current: 5.41 A-2.7 A (65.0 W) Rated output voltage: 12-24 Vdc System Rated voltage: 12-24 Vdc Rated current: 5.41 A-2.7 A (65.0 W) • We strongly recommend that you use a grounded wall socket while using your Embedded Computer.
2.1.2 Connect a display panel to your Embedded Computer You can connect a display panel or projector to your Embedded Computer that has the following connector(s): • HDMI™ connector To connect a display panel to your Embedded Computer: Connect one end of an HDMI™ cable to an external display, and the other end of the cable to your Embedded Computer’s HDMI™ port.
2.1.3 Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your Embedded Computer. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your Embedded Computer: Connect the USB cable from your keyboard and mouse to any of the USB ports of your Embedded Computer. NOTE: • The keyboard varies with country and/or region. • The keyboard and mouse are purchased separately.
2.1.4 Turn on your Embedded Computer Press the power button to turn on your Embedded Computer if it does not power on automatically when you connect it to a power source.
2.2 Turning off your Embedded Computer If your Embedded Computer is unresponsive, press and hold the power button for at least four (4) seconds until your Embedded Computer turns off.
PE Series
3 Upgrading your Embedded Computer
3.1 Removing the bottom cover IMPORTANT! • Ensure that your hands are dry before proceeding with the rest of the installation process. Before installing any of the features in this guide, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static electricity. • Turn off the power of your Embedded Computer and allow it to cool for at least 10 minutes before performing any installation/ uninstallation process.
3.2 1. Replacing the bottom cover Align the screw holes on the bottom cover with those on your Embedded Computer’s chassis. Secure the bottom cover using the screws removed previously.
3.3 Installing a nano SIM card (optional) Your embedded computer comes with two (2) nano SIM card slots. NOTE: Nano SIM cards are purchased separately. 1. Remove the two (2) screws securing the metal slot cover (A), and then remove the cover (B). 2. Insert your nano SIM card(s) into the nano SIM card slot(s) with the gold contacts facing up. Make sure that each card is pushed all the way into its card slot.
3. Replace the metal slot cover (A), and secure it with the screws removed previously (B).
3.4 Installing a microSD card (optional) Your Embedded Computer comes with one (1) microSD card slot. NOTE: The microSD card is purchased separately. 1. Remove the two (2) screws securing the slot cover (A), and then remove the cover (B). 2. Insert your microSD card into the microSD card slot with the gold contacts facing up. Make sure that the card is pushed all the way into the card slot.
3. Replace the metal slot cover (A), and secure it with the screws removed previously (B).
3.5 Installing an M.2 (E-key) module Your Embedded Computer comes with an M.2 (E-key) slot that allow you to install an M.2 wireless (Wi-Fi / Bluetooth) module. To install an M.2 wireless module: 1. Remove the screw from the M.2 standoff. 2. Align and insert the wireless card into its slot inside the Embedded Computer. 3. Gently push down the wireless card on top of the standoff, and then fasten it using the previously removed screw. 4.
WIFI-Main WIFI-AUX WIFI-Main WIFI-AUX PE Series 43
3.6 Installing an M.2 (M-key) module Your Embedded Computer comes with an M.2 (M-key) slot that allows you to install an M.2 SSD (M-key, supports 2242/2260/2280 PCIe x4) module. To install an M.2 SSD module: 1. Remove the screw from the standoff. 2. If the standoff is already seated in the right mounting hole to fit your M.2 SSD module, skip to step 4. 3. Unscrew the standoff (A) and install it to a mounting hole that matches the length of your M.2 SSD module (B). 4. Align and insert the M.
3.7 Installing an mPCIe module Your Embedded Computer comes with an mPCIe slot that allows you to install an LTE mPCIe module. To install an LTE mPCIe module: 1. Remove the two (2) screws from the standoffs. 2. Align and insert the LTE module into the slot. 3. Press down, and then secure it in place using the two (2) screws previously removed. 4. (optional) Connect the RF cables from the antennas to your LTE module.
Antenna Color Coding 46 PE Series Band Color Antenna Type White WWAN-Main Blue WWAN-AUX Red GPS
3.8 Installing antennas (optional) You may install antennas to the five (5) antenna jacks located on the rear panel. The installed antennas can be connected to an LTE card installed in the mPCIe/mSATA slot or to a wireless card installed in the M.2 Wi-Fi slot. NOTE: • It is recommended that you install the antennas as shown in the diagram below. • LTE antennas are flatter and slightly longer than the Wi-Fi and GPS antennas.
To install an antenna: NOTE: If your Embedded Computer came pre-installed with wireless card antenna jacks, skip to step 8. 1. Remove the bottom cover. Refer to Removing the bottom cover for details. 2. Prepare the RF connector and cable. 3. Remove the rubber caps from the antenna holes. 4. Insert the antenna jack end of the RF connector and cable into the antenna jack from within the chassis outwards.
5. Insert the bundled O-ring to the antenna jack (A), then secure the antenna jack using the bundled hex screw (B). 6. Connect the other end of the RF connector and cable to your wireless card (refer to Installing a wireless card to the M.2 slot for details) or to your WWAN card (refer to Installing an mPCIe module to the Mini PCIe/mSATA slot for details). 7. Replace the bottom cover. Refer to Replacing the bottom cover for details. 8.
3.9 Installing wall mount brackets (optional) 1. Remove the four (4) rubber feet screws (A), and then remove the rubber feet from them (B). 2. Align the wall mount brackets to the rubber feet screw holes, and then secure the wall mount brackets to your Embedded Computer using the rubber feet screws.
NOTE: • The wall mount brackets are compatible with most DIN rail clips available on the market. • The rubber feet screws and wall mount bracket screws are the same screws. 3.10 Mounting to a surface (optional) You can install your Embedded Computer to a suitable surface using wall mount brackets. 1. Make sure that the wall mount brackets are already installed. Refer to the section Installing wall mount brackets for installation instructions. 2.
3.11 Installing DIN rail clips (optional) 1. Make sure that the wall mount brackets are already installed. Refer to the section Installing wall mount brackets for installation instructions. 2. Align the screw holes on the DIN rail clips to the ones on the wall mount brackets as shown below. 3. Secure the DIN rail clips to the wall mount using the screws bundled with the DIN rail clips. 4.
3.12 Installing the terminal block (optional) You may install terminal blocks into the Isolated DIO connector, which allow you to support additional devices with serial ports or micro controllers by referring to the pin definitions and connecting cables to the slots on the terminal blocks as needed. IMPORTANT! Connect only one (1) cable to a slot on the terminal block. NOTE: • The terminal block is purchased separately.
PE Series
4 Setting up your Embedded Computer
4.1 Requirements Before you start setting up your Embedded Computer, make sure you have the following available: • 1 x micro USB cable with data transfer function (to connect a host PC running on Linux OS to your Embedded Computer’s flash port) • 1 x Power supply • 1 x Monitor with HDMI™ cable • 1 x Keyboard and Mouse set NOTE: Make sure to use the bundled power supply, or, if you are using another power supply, ensure to use a 12~24V power supply. 4.
4. Insert the tip of an unfolded paper clip into the force recovery pinhole (refer to the Left view section for the location), press in, and hold. 5. While holding the paper clip in place, connect the power adapter, which should automatically power on your Embedded Computer. If it does not, press the power button. 6. Wait three (3) seconds, and then release the paper clip from the force recovery pinhole. You should now be in force recovery mode and ready to flash the OS image. 7.
PE Series
Appendix
Safety information Your Embedded Computer is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • • • • 60 Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface.
Care during use • Do not walk on the power cord or allow anything to rest on it. • • Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug the power cord from the power outlets before cleaning the system. Use this product with care when operating at full load, as the product may reach temperatures of up to 60˚C and the outer casing may reach temperatures of up to 73˚C.
Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users DO NOT throw the Embedded Computer in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Regulatory notices COATING NOTICE IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules.
RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
VCCI: Japan Compliance Statement Class A ITE Japan RF Equipment Statement 屋外での使用について 本製品は、5GHz帯域での通信に対応しています。電波法の定めにより 5.2GHz、5.
Declaration of compliance for product environmental regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/Compliance.
Türkiye RoHS AEEE Yönetmeliğine Uygundur ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http:// csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
甲類警語 警告使用者：此為甲類資訊技術設備，於居住環境中使用時，可能會造 成射頻擾動，在此種情況下，使用者會被要求採取某些適當的對策。 Taiwan BSMI Class A Notice This product is Class A. In a domestic environment, this product may cause radio interference. You may be required to take adequate measures.
UK: The Radio Equipment Regulations 2017 (S.I. 2017/1206) Simplified UKCA Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.
EU: Radio Equipment Directive (Directive 2014/53/EU) Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.
Zjednodušené prohlášení o shodě EU Společnost ASUSTek Computer Inc. tímto prohlašuje, že toto zařízení splňuje základní požadavky a další příslušná ustanovení směrnice 2014/53/ EU. Plné znění prohlášení o shodě EU je k dispozici na adrese https://www.asus.com/support/ V zemích uvedených v tabulce je provoz sítě Wi-Fi ve frekvenčním rozsahu 5 150 - 5 350 MHz povolen pouze ve vnitřních prostorech: Forenklet EU-overensstemmelseserklæring ASUSTeK Computer Inc.
Vienkāršota ES atbilstības paziņojums ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst Direktīvas 2014/53/ES būtiskajām prasībām un citiem citiem saistošajiem nosacījumiem. Pilns ES atbilstības paziņojuma teksts pieejams šeit: https://www.asus.com/support/ Wi-Fi darbība 5150–5350 MHz ir jāierobežo lietošanai telpās valstīs, kuras norādītas tālāk. Supaprastinta ES atitikties deklaracija Šiame dokumente bendrovė „ASUSTek Computer Inc.
Förenklad EU-försäkran om överensstämmelse ASUSTek Computer Inc. deklarerar härmed att denna enhet överensstämmer med de grundläggande kraven och andra relevanta bestämmelser i direktiv 2014/53/EU. Fullständig text av EU-försäkran om överensstämmelse finns på https://www.asus.com/support/ WiFi som använder 5150-5350 MHz kommer att begränsas för användning inomhus i de länder som anges i tabellen: ประกาศเกี่ยวกับความสอดคล้องของสหภาพยุโรปแบบย่อ ASUSTek Computer Inc.
Service and Support Visit our multi-language website at https://www.asus.com/support/. Manufacturer 製造商 ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112 華碩電腦股份有限公司 ASUSTeK COMPUTER INC.
PE Series
