¤ NX1101 Gigabit PCI Network Adapter 1
Introduction Thank you for purchasing the ASUS NX1101 Gigabit Network Adapter! It is a high performance 10BASE-T, 100BASE-TX, and 1000BASE-T network adapter with Windows Plug and Play for PCI local bus computers. Features • • • • • • • • • • • • • Integrated 10/100/1000 transceiver Auto-Negotiation with Next page capability Support PCI 2.2, 32 bit, 33/66MHZ. Crossover Detection & Auto-Correction. Microsoft NDISS checksum offload (IP, TCP, UDP) and largesend offload support.
Installing the ASUS NX1101 1. 2. 3. 4. 5. 6. Power off your computer and unplug your PC power cord. Open your PC case and find an available PCI slot on the motherboard. Insert the ASUS NX1101 into the PCI slot until all contacts are seated. Secure the ASUS NX1101 bracket to your PC chassis with a screw. Close your PC case. Connect one end of Ethernet RJ-45 cable to the Adapter.
1000 ACT 10/100 ACT Status Indicators and Ports 10/100 ACT: Blinking: Data transferring at 10 or 100Mbps 1000 ACT: Blinking: Data transferring at 1,000Mbps RJ-45: This is a port used to connect the Ethernet cable RJ-45 Technical Specifications Communication Standards Compliant with IEEE 802.3z Full Duplex flow control IEEE 802.3x IEEE 802.1q VLAN tagging 10BASE-T: Compliant with IEEE 802.3 100BASE-TX: Compliant with IEEE 802.3u 1000BASE-T: Compliant with IEEE 802.
