Intel® NUC 13 Desk Kit/Mini-PC Technical Product Specification Regulatory Models: NUC13VYK (Kit, Mini PC) May 2023 Revision 1.0 Intel® NUC Boards NUC13AN may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata, if any, are documented in Intel® NUC Board NUC13AN Specification Update.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Revision History Revision Revision History Date 1.0 First release of the Intel NUC 13 Pro Kit Technical Product Specification May 2023 Disclaimer THIS PRODUCT SPECIFICATION APPLIES TO ONLY THE STANDARD INTEL NUC BOARD NUC13AN WITH BIOS IDENTIFIERS ANRPL357.00XX INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® NUC Kits NUC13VY. Some features are only available on certain SKUs. Intended Audience The TPS is intended to provide detailed, technical information about Intel® NUC Kit, and Mini PCs NUC13VY and its components to the vendors, system integrators, and other engineers and technicians who need this level of information.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xxh An address or data
Board Identification Information Basic Intel® NUC Board NUC13AN Identification Information AA Revision BIOS Revision Notes ANRPL357.00XX 1 Notes: 1. The AA number is found on a small label on the component side of the board.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Online Support To Find Information About… Intel NUC Kit/Mini PC NUC13VY Intel NUC Kit/Mini PC Support High level details for Intel NUC Kit/Mini PC NUC13VY BIOS and driver updates Tested memory Integration information Processor datasheet Regulatory documentation viii Visit this World Wide Web site: http://www.intel.com/NUC http://www.intel.com/NUCSupport https://ark.intel.com https://downloadcenter.intel.com http://www.intel.
Table of Contents 1 Product Description ............................................................................................... 13 1.1 Overview ...................................................................................................................................................... 13 1.1.1 Summary of Mini PC SKUs ................................................................................................. 13 1.1.2 Summary of Standard Kit and Board SKUs .............................
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 5.4 5.5 5.6 5.3.2 Power Button Menu .............................................................................................................. 44 Hard Disk Drive Password Security Feature .................................................................................. 45 BIOS Security Features ..........................................................................................................................
Contents Table 24. Supervisor and User Password Functions .................................................................................... 46 Table 25. BIOS Error Messages .............................................................................................................................
1 Product Description 1.1 Overview 1.1.1 Summary of Mini PC SKUs Product Codes and MM#s for the SKUs below can be found at https://ark.intel.com. Processor Intel® Core™ i7-1360P Processor Chassis Slim AC Cord (C5) US, EU, or CN RAM 2 x 8 GB Storage 512 GB Gen4 NVMe SSD Intel® Core™ i5-1340P Processor Slim US, EU, or CN 2 x 4 GB 512 GB Gen4 NVMe SSD 1.1.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 1.1.3 Feature Summary Kits Table 1 summarizes the major features of Intel® NUC Kit, and Mini PC NUC13VY Table 1. Feature Summary Board Dimensions 4.0in by 4.0in (104.1mm by 101.6mm) Max Chassis Dimensions Slim Chassis: 117mm by 112mm x 37mm (including feet) Processor Intel® NUC Kits, and Mini PCs NUC13VY Standard products have a soldered-down 13th generation processor from the list below.
Technical Reference Communication Intel® Wi-Fi 6E1 AX211 (Gig+) M.2 2230 add-in card (Mini PC and Kit only) via M.2 2230 (key type E) connector • 802.11ax R2 2x2, both with 160Mhz channel support + Bluetooth v5.3 • Maximum transfer speed up to 2.4 Gbps • Supports PCIe and USB More information about Intel® wireless products can be found at https://ark.intel.com To obtain drivers visit https://downloadcenter.intel.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Operating Temperatures BIOS Operating System (Mini PCs only) • 12VDC to 20VDC +/- 5% with DC voltage protection Intel® BIOS provides options to select an External Ambient Temperature Tolerance. Users can select 0-35C, 0-40C, or User Defined. Each option impacts system power, performance, and cooling settings.
Technical Reference 2 Product Layout 2.1 Board Layout 2.1.1 Board Layout (Bottom) Figure 1 shows the location of the major components on the bottom of Intel® NUC Board NUC13AN. Figure 1.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Table 3. Components Shown in Figure 1 18 Item from Figure 1 Description A 12-20 V DC Input Jack B HDMI 2.1 TMDS Port 1 with Built-In CEC Support C LAN Connector D Back Panel USB 3.2 Gen 2 / USB 2.0 E HDMI 2.1 TMDS Port 2 with Built-In CEC Support F BIOS Security Header G Front Panel Header H Intel® Management Engine BIOS Extension (Intel® MEBX) Reset Header I M.
Technical Reference 2.1.2 Board Layout (Top) Figure 2 shows the location of the major components on the bottom-side of Intel® NUC Board NUC13AN. Figure 2. Major Board Components (Top) Table 4.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 2.1.3 Front Panel Item Description A USB 3.2 Gen 2 Port (black) B USB 3.2 Gen 2 Port (black) C 3.5mm Stereo Headset Jack D Front Panel Power Button Figure 3. Front Panel Connectors 2.1.4 Back Panel Item Description A 12-20 V DC Input Jack B HDMI 2.1 TMDS Port 1 C LAN Connector D USB 3.2 Gen 2 Port (blue) / USB 2.0 Port (black) E HDMI 2.
Technical Reference 2.1.5 Block Diagram Figure 5.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 3 Feature Descriptions 3.1 Graphics Subsystem Intel® NUC Boards NUC13AN support Intel® Iris® Xe Graphics 3.1.1 Intel® Iris® Xe Graphics Intel® Iris® Xe Graphics implements a high-performance and low-power HW acceleration for video decoding operations for multiple video codecs.
Technical Reference 3.1.2 Display Emulation Display emulation is supported using the HDMI ports so that the system may be remotely accessed in a headless configuration or be capable of tolerating display connectivity interruptions without the operating system redetecting and rearranging the overall display layout.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 3.2 SATA Interface The board provides the following SATA interfaces: • One SATA 6.0 Gb/s combined Data and Power connector The PCH provides independent SATA ports with a theoretical maximum transfer rate of 6 Gb/s. A point-to-point interface is used for host to device connections. 3.3 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory.
Technical Reference 3.4 LAN Subsystem 3.4.1 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 6). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 6. LAN Connector LED Locations Table 5 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 5. LAN Connector LED States LED LED Color Link Green Data Rate 3.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Table 6. Systems States State Description G0/S0/C0 Full On: CPU operating. Individual devices may be shut to save power. The different CPU operating levels are defined by Cx states. GO/S0/Cx Cx State: CPU manages C-states by itself and can be in lower power states. G1 Suspend-To-RAM (STR): The system context is maintained in system DRAM, but power is shut to non-critical circuits. Memory is retained and refreshes continue.
Technical Reference NOTE The use of these wake-up events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 4 Technical Reference 4.1 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: back panel USB Type A and Type C, front panel USB, internal USB headers, internal power header, and DC Vin jack. All other connectors and headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals.
Technical Reference Connector is Molex part number 53398-0471, 1.25mm Pitch PicoBlade* Header, Surface Mount, Vertical, Lead-Free, 4 Circuits. Table 10. M.2 2280 Module (Mechanical Key M) Connector Pin Signal Name Pin Signal Name 74 3.3V (4A total for pins 74, 72, 70, 18, 16, 14, 12, 4, 2 (0.5A per pin)) 75 GND 72 3.3V (4A total for pins 74, 72, 70, 18, 16, 14, 12, 4, 2 (0.5A per pin)) 73 GND 70 3.3V (4A total for pins 74, 72, 70, 18, 16, 14, 12, 4, 2 (0.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Table 11. M.2 2230 Module (Mechanical Key E) Connector Pin Signal Name Pin Signal Name 74 3.3V (2A total for pins 74, 72, 4, 2 (0.5A per pin)) 75 GND 72 3.3V (2A total for pins 74, 72, 4, 2 (0.5A per pin)) 73 WT_CLKP UIM_POWER_SRC/GPIO1/PEWAKE1# 71 WT_CLKN CLKREQ1# 69 GND PERST1# 67 WTD0P REFCLK0 65 WTD0N ALERT#/A4WP_IRQ# (I)(0/3.3) 63 GND I2C CLK/A4WP_I2C_CLK (O)(0/3.
Technical Reference Table 12. M.2 2242 Module (Mechanical Key B) Connector Pin 74 72 70 68 66 64 62 60 58 56 54 52 50 48 46 44 42 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 Signal Name Pin Signal Name 3.3V 75 CONFIG_2 or N/C 3.3V 73 GND 3.3V 71 GND SUSCLK(32kHz) (O)(0/3.3V) 69 PEDET (NC-PCIe / GND= SATA) N/C 67 N/C N/C 65 N/C N/C 63 N/C N/C 61 N/C N/C 59 N/C N/C 57 GND PEWAKE# (I/O)(0/3.3V) 55 REFCLKP CLKREQ# (I/O)(0/3.3V) 53 REFCLKN PERST# (O)(0/3.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 4.1.1.1 Front Panel Header (2.0 mm Pitch) This section describes the functions of the front panel header. Table 13 lists the signal names of the front panel header. Figure 7 is a connection diagram for the front panel header. Table 13. Front Panel Header (2.
Technical Reference 4.1.1.1.3 Power/Sleep LED Header Pins 2 and 4 can be connected to a one- or two-color LED. Table 14 and Table 15 show the possible LED states. Table 14. States for a One-Color Power LED LED State Description Off Power off Blinking Standby Steady Normal operation Table 15.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Figure 8. Location of the BIOS Security Jumper Table 16 describes the jumper settings for the three modes: normal, lockdown, and configuration. Table 16. BIOS Security Jumper Settings 34 Function/Mode Jumper Setting Configuration Normal 1-2 Lockdown 2-3 The BIOS uses current configuration information and passwords for booting.
Technical Reference Configuration 4.1.1.3 None BIOS Recovery Update process if a matching *.bio file is found. Recovery Update can be cancelled by pressing the Esc key. If the Recovery Update was cancelled or a matching *.bio file was not found, a Config Menu will be displayed. The Config Menu consists of the following (followed by the Power Button Menu selections): [1] Suppress this menu until the BIOS Security Jumper is replaced. [2] Clear BIOS User and Supervisor Passwords.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 4.1.1.4 Fan Header Current Capability Table 17 lists the current capability of the fan headers. Table 17. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 1A 4.1.1.5 Power Supply Connectors NOTE External power voltage, 12-20 (±5%) V DC, is dependent on the type of power supply used.
Technical Reference Table 18. Internal Power Supply Connector Pins Pins 1,2 3,4 Signal Name +12-20V GND Figure 9.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 4.2 4.2.1 Mechanical Considerations Chassis Images Figure 10. Chassis Image Front Figure 11.
Technical Reference 4.2.2 Form Factor Figure 12 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 104.1 millimeters (front to back) by 101.6 millimeters (side to side). Figure 12.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Figure 13 shows the height dimensions of the board. Dimensions are in mm. Figure 13. Board Height Dimensions 4.3 Thermal Considerations CAUTION Failure to ensure appropriate airflow may result in reduced performance of both the processor and/or voltage regulator or, in some instances, damage to the board. All responsibility for determining the adequacy of any thermal or system design remains solely with the system integrator.
Technical Reference 4.4 Reliability The demonstrated Mean Time Between Failures (MTBF) is done through 24/7 testing. Full Intel® NUC systems in chassis with memory, SSD or HDD, and a fan are ran at 100% on time for 90 days continuously while running system wide stress inducing software in a 40 °C ambient air temperature chamber. The demonstrated MTBF for Intel NUC Board NUC13AN is >50,000 hours. 4.5 Environmental Table 19 lists the environmental specifications for the board.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification Unpackaged Random profile 5 Hz @ 0.01 g^2/Hz to 20 Hz @ 0.02 g^2/Hz(slope up) 20 Hz to 500 Hz @ 0.02 g^2/Hz (flat) Input acceleration is 3.13g RMS Vibration (System) Unpackaged Random profile 5 Hz @ 0.001 g^2/Hz to 20 Hz @ 0.01 g^2/Hz(slope up) 20 Hz to 500 Hz @ 0.01 g^2/Hz (flat) Input acceleration is 2.20g RMS Packaged Random Profile: 0.001 g^2/Hz to 20 Hz @ 0.01 g^2/Hz (slope up) 20 Hz to 500 Hz @ 0.
Technical Reference 5 Overview of BIOS Features 5.1 Introduction The board uses an Intel AMI BIOS core that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated through multiple methods (see Section 5.2). The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The SPI Flash includes a 32 MB flash memory device.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification NOTE The network can be selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a remote boot ROM installed. Pressing the key during POST automatically forces booting from the LAN. To use this key during POST, the User Access Level in the BIOS Setup program’s Security menu must be set to Full. 5.3.
Technical Reference 5.4 [F7] Update BIOS BIOS Update during the BDS phrase. The BIOS will update independent of any OS loading and provides a menu UI accessible during boot up. This is not a recovery tool and will not overwrite a corrupt BIOS or ME firmware. [F9] Remote Assistance Note: Will only be displayed if Remote Assistance is supported.
Intel NUC Kit/Mini PC NUC13VY {X} Technical Product Specification 5.5 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A Supervisor and User password can be set for the BIOS Setup program and for botting the computer, with the following restrictions: • The Supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is Supervisor Mode.
Technical Reference CMOS Timer Not Set The battery may be losing power. Replace the battery soon. Processor Thermal Trip Processor overheated. Auto RTC Reset The system triggers RTC clear to recover the system back to the normal condition from consecutive boot failure.
