Intel® NUC 12 Pro Mini PC NUC12WSHi3 Intel® NUC 12 Pro Mini PC NUC12WSHi5 Intel® NUC 12 Pro Mini PC NUC12WSHi7 User Guide August 2022 1 Intel® NUC 12 Pro Mini PC NUC12WSH User Guide – August 2022
You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter disclosed herein. No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document. All information provided here is subject to change without notice.
Contents 1.0 Introduction ....................................................................................................................................................... 5 1.1 1.2 1.3 Before You Begin ........................................................................................................................................... 5 Installation Precautions .............................................................................................................................
Revision History Date Revision August 2022 1.0 Description Initial release.
1.0 Introduction This User Guide provides step-by-step installation instructions for these products: • • • 1.1 Intel® NUC 12 Pro Mini PC NUC12WSHi3 Intel® NUC 12 Pro Mini PC NUC12WSHi5 Intel® NUC 12 Pro Mini PC NUC12WSHi7 Before You Begin CAUTIONS The steps in this guide assume you’re familiar with computer terminology and with the safety practices and regulatory compliance required for using and modifying computer equipment.
• • • • • Sharp pins on connectors Sharp pins on circuit boards Rough edges and sharp corners on the chassis Hot components (such as SSDs, processors, voltage regulators, and heat sinks) Damage to wires that could cause a short circuit Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel. 1.
2.0 Open the Chassis Unscrew the four corner screws on the bottom of the chassis and lift the cover.
3.0 Upgrade System Memory The Intel® NUC 12 Pro Mini PC NUC12WSK has two 260-pin DDR4 SO-DIMM sockets. Pre-installed memory Intel® NUC 12 Pro Mini PC NUC12WSHi3 2x 4GB DDR4-3200 SODIMMs Intel® NUC 12 Pro Mini PC NUC12WSHi5 2x 4GB DDR4-3200 SODIMMs Intel® NUC 12 Pro Mini PC NUC12WSHi7 2x 8GB DDR4-3200 SODIMMs To upgrade memory, be sure to select memory modules that meet these requirements: • • • 1.
the clips are firmly in place (C). 3.2 Install Additional Memory 1. 2. 3. 4. 5. Observe the precautions in "Before You Begin" in Section 1.1. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the power cord. Remove the computer’s bottom chassis cover. Install the additional module: a. Align the small space at the bottom edge of the memory module with the key on the socket. b. Insert the bottom edge of the module at a 45 degree angle into the socket (A). c.
4.0 Changing the M.2 SSD The Intel® NUC 12 Pro Mini PC NUC12WSK supports an 80mm and 42mm SSD. Pre-installed M.2 Intel® NUC 12 Pro Mini PC NUC12WSHi3 500GB Gen 4 NVMe SSD Intel® NUC 12 Pro Mini PC NUC12WSHi5 500GB Gen 4 NVMe SSD Intel® NUC 12 Pro Mini PC NUC12WSHi7 500GB Gen 4 NVMe SSD Find compatible M.2 SSDs in the Intel Product Compatibility Tool: • • • Intel® NUC 12 Pro Mini PC NUC12WSHi3 Intel® NUC 12 Pro Mini PC NUC12WSHi5 Intel® NUC 12 Pro Mini PC NUC12WSHi7 To install a different M.
Intel® NUC 12 Pro Mini PC NUC12WSH User Guide – August 2022
5.0 Close the Chassis After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging the screws.
6.0 Use the VESA Bracket (Optional) Follow these instructions to attach and use the VESA mount bracket: 1. Using the four small black screws that were included in the box, attach the VESA bracket to the back of the monitor or TV. 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC.
3. Slide the Intel NUC onto the VESA mount bracket.
7.0 Connect Power Each Intel NUC model includes a region-specific AC power cord. Product codes Power cord type RNUC12WSHI30WA6 RNUC12WSHI50WA6 RNUC12WSHI70QA6 CN power cord included.
8.0 Set Up Microsoft® Windows 11 Microsoft Windows 11 is already installed on the Intel NUC. The first time you start the computer, you are guided through the Windows 11 setup steps, including: • • • • • • Selecting your region and language. Accepting the Microsoft Windows license terms. Personalizing Windows and assign a PC Name. "Get Online" dialog to pick a wireless network (this step is optional). Choosing Express Settings or Customize. Assigning a User Name and Password.
9.
10.0 Operating System Recovery There’s a Windows recovery partition on the Intel NUC. You can use this partition to Refresh, Reset, or Restore Windows. Here is what each of these actions do: Refresh If your PC isn't performing as well as it once did, and you don't know why, you can refresh your PC. This action doesn’t delete any of your personal files or change your settings.
To access the recovery media: If Windows starts From Windows Start, type Recovery and select Recovery Options. See Recovery options in Windows 10 for complete details on how to use the recovery options. If Windows doesn’t start The recovery process should automatically start. If Recovery doesn’t automatically start, you can try to initiate it as follows: 1. Press F8 during boot, when you see the prompt “F8 to Activate Windows 8.1/10 Recovery Mode”. 2. Follow the recovery steps.
