Motherboard NCT-D(A)
T2307 4.0 2005 10 © 2005 1.22 BIOS 2 1.24 ...
2.6 2.7 3.1 3.2 3.3 2.5.2 .............................................................................. 2-16 2.5.3 .......................................................................... 2-17 2.5.4 PCI PCI-X ................................................. 2-18 2.5.5 PCI Express x8/x16 ............................................... 2-18 2.5.6 WiFi ...................................................................... 2-18 .............................................................................
.......................................................................... 4-13 Main Menu ......................................................................... 4-14 4.3.1 System Time [XX:XX:XXXX] ................................................. 4-14 4.3.2 System Date [Day XX/XX/XXXX] .......................................... 4-14 4.2.9 4.3 4.4 4.5 4.6 4.7 4.3.3 Legacy Diskette A [1.44M, 3.5 in.] ........................................... 4-14 4.3.
• • • • • • • • • • • • 6
NCT-D • NCT-D NCT-D NCT-D • • • BIOS BIOS BIOS • NCT-D 7
Pin Jumper Mode [1-2] JumperFree ™ Mode [2-3] 1 2 Jumper Mode 2 3 Jumper Free (Default) http://tw.asus.
NCT-D Intel® Xeon 64-bit Hyper-Threading 604-pin 1MB L2 Intel® E7525 Memory Controller Hub (MCH) Intel® 6300ESB I/O Controller Hub(ICH) 800 MHz 240 DDR2 DIMM Registered ECC 400MHz DDR2 256MB 8GB PCI Express x8 PCI Express x16 PCI-X 66MHz/64-bit PCI-X 66MHz/64-bit PCI 33MHz/32-bit/5V PCI 2.3 Intel® 6300ESB UltraDMA 100/66/33 Serial ATA Adaptec HostRAID x4,PCI-E,1.0a , PCI-E1.0a PCI-X 1.0a ZCR,PCI-X 1.
NCT-D BIOS AMI BIOS 8MB BIOS2.3 WfM2.0 Green PnP DMI2.0a SM PS/2 PS/2 S/PDIF IEEE-1394a RJ-45 USB 2.0 6 Primary Secondary IDE Serial ATA Serial ATA RAID CPU IEEE 1394 USB SSI 24-pin 8-pin GAME / MIDI SMBus ATX ATX 24 12 x 9.8 8 Pin 12V 30.5x 24.
NCT-D NCT-D NCT-D
1.1 ........................................ 1-1 1.2 1.3 ...................................................................... 1-1 ......................................................................
1.1 NCT-D A NCT-D NCT-D XeonTM NCT-D E7525 1.2 NCT-D NCT-D I/O USB 2.
1.3 1.3.1 Xeon TM ZIF 0.13 NetBurst 64-bit 604 1MB L2 800MHz Hyper-Threading technology 64-bit EM64T Windows Linux 3.6GHz+ Intel E7525 Intel 6300ESB Intel E7525 MCH 6300ESB E7525 DDR2-400 6300ESB PCI-X 1.0a I/O / DDR2 DDR2 400 MHz 3D DDR2 8.
Gigabit Broadcom BCM5751 Gigabit Gigabit WiFi-b/g Express PCI 2-18 SATA RAID RAID0 Intel 6300ESB 1 SATA Adaptec AIC-8130 PCI-X SATA-II RAID 0 RAID1 RAID 0+1 Sound MAX 2 Serial ATA Adaptec HostRAID ADI AD1980 AC 2-27 2-28 97 5.
IEEE-1394a IEEE 1394 TI TSB43AB22A IEEE 1394 IEEE 1394a 400Mbps 2-31 USB 2.0 USB 1.1 12 Mbps USB 2.0 USB 2.0 USB 2.0 USB 2.0 2-31 2-25 USB 1.1 CPU / Rotation pre minute ASIC RPM 1.3.
ASUS POST ReporterTM POST POST P O S T POST T M Power-On Self-Tests Winbond Voice Editor 3-3 MyLogo2TM MyLogo2TM 4-33 Instant Music Windows Instant Music 4-18 EZ Flash BIOS EZ Flash BIOS MS-DOS BIOS 4-7 NCT-D 1-5
1-6
2.1 ......................................................... 2-1 2.2 ................................................................. 2-2 2.3 CPU ................................................ 2-10 2.4 .................................................................... 2-14 2.5 ....................................................................... 2-16 2.6 ............................................................ 2-19 2.7 ........................................
2.1 1. 2. 3. 4. 5.
2.2 NCT-D NCT-D 2.2.1 PS/2 PS/2 COM1/2 2.2.
2.2.3 2 1 3 8 2 1. 2. 1 2.
4. 5. 6.
7. 8. 4 7 8.
9. I/O CPU CPU CPU 10. 2-6 10 2.2.
2.2.4 25cm (9.8in) ATXPWR1 PS/2KBMS T: Mouse B: Keyboard ATX12V1 FM_CPU1 KBPWR1 mPGA 604 CPU_FAN1 Intel E7525 MCH CPU2 FRNT_FAN1 CPU_FAN2 FP_AUDIO1 FM_CPU2 J4 J3 Broadcom BCM5751 30.5cm (12in) Top:Line In Center:Line Out Below:Mic In mPGA 604 DDR DIMM_B1 (72 bit, 184-pin module) CPU1 REAR_FAN2 USB2.
2.2.5 1. CPU sockets 2. DDR2 DIMM sockets 3. PCI/PCI-X/PCI Express slots 4. WiFi slot CPU 1. Clear RTC RAM 2. CPU fan pin selection 3. USB device wake-up COMS 3-pin CLRTC1 CPU 3-pin FM_CPU1,FM_CPU2 USB 3-pin USBPW12, USBPW34 3-pin KBPWR IEEE1394 3-pin 1394_EN Gigabit 3-pin LAN_EN1 SATA 3-pin SATA_EN1 USB 3-pin USB_EN1 2-19 2-20 PS/2 2-24 2-24 2-24 2-24 2-24 2-24 2-24 2-25 2-25 2-25 2-25 2-25 4. Keyboard power 5. IEEE 1394 setting 6. Gigabit LAN Controller setting 7. SATA controller setting 8.
1. Floppy disk connector 2. Primary IDE connectors 3. Serial ATA connectors 4. Serial ATA RAID connector 5. Hard disk activity LED connector 6. Internal audio connectors 7. Chassis intrusion connector 8. Front panel audio connector 9. CPU and system fan connectors 10.IEEE 1394 connector 11.USB connectors 12.SSI Power connectors 13.Serial Port connectors 14.GAME / MIDI connector 15.Backplane SMBus connector 14.
2.3 CPU 604 XeonTM 800MHz ZIF 604 1MB L2 64- EM64T bit 2.3.1 1. 604 CPU CPU Intel Xeon Gold Arrow NCT-D NCT-D Socket 604 CPU 1 CPU CPU 1 2.
3. Xeon TM Xeon TM 4. Xeon TM 5. 6. 7.
2.3.3 CPU Intel® Xeon™ 1. 2. CPU ( CPU ) CPU CPU 4 ( ) FM_CPU1 2-20 2-12 CPU CPU CPU 1.
2. CPU CPU 3. 4-pin COU 4.
DCT-D 1.1 1.2 1.3 1.3.1 1.3.2 2.1 2.2 2.3 2.4 2.5 ...................................................................................................... 7 .......................................................................................... 7 ............................................................................ 7 ................................................................................................ 8 ............................................................ 8 ....................
2.4 2.4.1 Double Data Rate 2 8GB DDR2 DIMM DIMM_B1 DIMM_A2 DIMM_B2 240-pin Registered ECC 400MHz DIMM_A1 DDR2 DIMM NCT-D NCT-D DDR2 DIMM sockets 2.4.2 256, 512MB 1GB Registered ECC DDR2 DIMM 1. CAS Latency tw.asus.com 2.
2.4.3 / 2 1. 3 2. 1 3. DDR2 DIMM DDR2 DDR DDR DDR2 2.4.4 2 1. 1 1 2.
2.5 / 2.5.1 1. 2. 3. 4. 5. 6. 2.5.2 1. BIOS BIOS 2. IRQ 3.
2.5.
2.5.4 PCI PCI-X 2.3 PCI / PCI-X SCSI USB PCI PCI-X 1.0a PCI PCI 2.5.5 PCI Express x8/x16 PCI Express x16 PCI Express x16 PCI Express x8 MCH x4 SCSI DRIA 2.5.6 WiFi WiFi WiFi-b tw.asus.com WiFi 2.4 GHz IEEE 802.
2.6 1. CMOS CLRTC1 CMOS CMOS 1. 2. 3. CLRTC1 CMOS [1-2] [2-3] [1-2] 4. 5. 6. Del BIOS BIOS 7. BIOS CMOS CLRTC CLRTC1 3 2 2 1 NCT-D NCT-D Clear RTC RAM Normal (Default) Clear CMOS C.P.R.
2. CPU (3-pin FM_CPU1, FM_CPU2) 3-pin CPU_FAN1, CPU_FAN2 4-pin 4-pin [1-2] [3-4] 4-pin FM_CPU1 1 2 DC mode (Default) 2 3 PWM FM_CPU2 2 1 DC mode (Default) 3 2 PWM NCT-D NCT-D FM_CPU Setting 3. USB 3-pin USBPW12, USBPW34 +5V USB +5VSB S1 S3 S4 USB +5V [1-2] USBPW12 1 2 Enable 2 3 Disable (Default) USBPW34 2 1 Enable NCT-D 3 2 Disable (Default) NCT-D USB device wake up 1. USB +5VSB 500mA/+5VSB 2.
4. (3-pin KBPWR1) KBPWR1 +5VSB [2-3] 1A/+5VSB BIOS KBPWR1 3 2 2 1 Enable (Default) Disable NCT-D NCT-D Keyboard power setting 5.
6. Gigabit 3-pin LAN_EN1 Broadcom BCM5751 Gigabit [1-2] LAN_EN1 2 1 Enable (Default) NCT-D 3 2 Disable NCT-D LAN_EN setting 7.
8. USB (3-pin USB_EN1) V I A VT6212 PCI USB 2.
2.7 2.7.
2/4/6 / USB USB 2.0 USB USB 2.
2.7.2 1. 34-1 pin FLOPPY FLOPPY PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. Pin 1 NCT-D NCT-D Floppy disk drive connector 40-1 pin PRI_IDE IDE UltraDMA/100/66 IDE ( CD-ROM ZIP IDE Master 1. IDE UltraDMA 2. 80 IDE , SEC_IDE IDE MO ) Slave UltraDMA 100/66 IDE PIN 1 SEC_IDE PIN 1 Pin 1 NCT-D NCT-D IDE connectors 2-26 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. PRI_IDE 3.
2. ATA 7-pin SATA1, SATA2 Serial ATA ATA 133MB Parallel ATA Serial 150MB Ultra ATA/133 Serial ATA Adaptec HostRAID ICH Intel 6300ESB RAID0 RAID1 [standard IDE] [standard IDE] Serial ATA Serial ATA RAID Configure SATA As [RAID] 6 IDE IDE Configuration SATA1 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND BIOS 4-16 4.3.
4. ATA (7-pin SATA_RAID1, SATA_RAID2 , SATA_RAID3 , SATA_RAID4) ATA ATA Serial Serial RAID Serial ATA Serial RAID GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXN2 RSATA_RXP2 GND SATA_RAID1 SATA_RAID2 Srerial ATA Serial ATA POST 5.
6. 4-pin CD1, AUX1 CD1 (Black) AUX1 (White) Right Audio Channel Ground Ground Left Audio Channel Right Audio Channel Ground Ground Left Audio Channel MPEG NCT-D NCT-D Internal audio connectors 7.
8. 10-1 pin FP_AUDIO1 Intel AC 97 / FP_AUDIO1 AGND +5VA BLINE_OUT_R MIC2 MICPWR Line out_R NC Line out_L BLINE_OUT_L NCT-D NCT-D Front panel audio connector 9. / / REAR_FAN1/2, FRNT_FAN1/2 350mA~740mA 53.28 ~4.44 (3-pin CHA_FAN1/2, 8.88W 2.
10.IEEE 1394 10-1 pin IEEE1394_1 10-1 pin 1394 1394 TPA0GND TPB0+12V GND 10-1 pin 1394 1 NCT-D IEEE-1394 connector USB 11.USB TPA0+ GND TPB0+ +12V IE1394_2 NCT-D IEEE 1394a 10-1 pin USB56, USB78 USB USB+5V USB_P6USB_P6+ GND NC USB 480Mbps USB+5V USB_P8USB_P8+ GND NC USB USB 2.0 USB78 1394 1 USB+5V USB_P5USB_P5+ GND NCT-D USB 2.
+3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground +12V_1 +12V_1 +12V_2 +12V_2 24 SSI 2.0 450W 8-pin ATX +12V 24-pin Power Connector NCT-D SSI Power connectors 2-32 GND GND GND GND +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts 12.
13. (10-1 pin COM1) BIOS COM COM2 COM2 COM2 COM2 PIN 1 NCT-D NCT-D Serial port connector /MIDI 16-1 pin GAME1 /MIDI USB 2.0/ /MIDI /MIDI +5V J1B2 J1CY GND GND J1CX J1B1 +5V MIDI GAME1 NCT-D NCT-D Game connector MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V 14.
15. SMBus 6-1 pin BPSMB1 SMBus SMBus Management Bus BPSMB1 NCT-D NCT-D SMBus connector 16.
• IDE_LED IDE IDE • BIOS • Reset NCT-D 2-35
2-36
3.1 1. 2. 3. 4. / 5. a. b. SCSI ( ) ATX c. 6. ATX 30 AMI BIOS 7.
3.2 ATX 3.2.1 Windows 2000 Windows XP 1. 2. 3. Windows 1. 2. 3. Windows 3.2.2 BIOS BIOS 4.
3.3 POST POST Reporter Winbond POST POST POST Voice Editor Winbond 3.3.1 POST POST BIOS 4.4.
3.3.
1. Load 2. Open Voicel 3. Write EEPROM 4.
POST POST 1. POST 2. 3. Windows 1. wave 1Mbit 2. 8 22Khz 3. 4. Add Add Wave File 5.
6. POST Event Sound Editor 7. wave Voicel 8. OK 9. 6 8 10. Save 11. Write EEPROM 12.
3-8
BIOS BIOS BIOS BIOS
4.1 BIOS 4.2 BIOS 4.3 ....................................... 4-1 .......................................................... 4-11 Main Menus ............................................. 4-14 4.4 4.5 Advanced Menu .................................. 4-18 Power Menu ......................................... 4-27 4.6 4.7 Boot Menu ........................................... 4-32 BIOS Exit Menu ...................................
4.1 BIOS BIOS Basic Input/ Output System 1. DOS 2. BIOS BIOS BIOS 3. Power-On Self Test POST 4. BIOS Windows BIOS BIOS AFUDOS BIOS 4.1.1 1. a. b. 1.44MB DOS a. b. Enter 1.44MB Windows c. d. e.
a. 1.44MB b. Windows 2000 c. d. D e. Enter 2. BIOS 4.1.2 AFUDOS AFUDOS BIOS BIOS DOS AFUDOS BIOS BIOS BIOS BIOS BIOS 600KB BIOS 1. AFUDOS afudos.exe 2. DOS filename A:\>afudos /oOLDBIOS1.
3. Enter BIOS A:\>afudos /oOLDBIOS1.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done Write to file ..... ok A:\> BIOS DOS BIOS AFUDOS 1. BIOS tw.asus.com BIOS BIOS 2. 3. AFUDOS.EXE BIOS DOS filename BIOS A:\>afudos /iNCTD.
4. AFUDOS BIOS A:\>afudos /iNCTD.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ..... done Reading flash .... done Advance Check .... Erasing flash .... done Writing flash .... 0x0008CC00 (9%) BIOS 5. BIOS DOS A:\>afudos /iNCTD.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
4.1.3 CrashFree BIOS 2 BIOS CrashFree BIOS 2 BIOS 1. BIOS BIOS BIOS BIOS 2. BIOS NCTD.ROM BIOS BIOS 1. 2. BIOS 3. BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “NCTD.rom”. Completed. Start flashing... BIOS 4.
BIOS BIOS 1. 2. 3. BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... 4. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file “NCTD.rom”. Completed. Start flashing... BIOS 5. BIOS BIOS BIOS 4-6 BIOS http://tw.asus.
4.1.4 EZ Flash BIOS EZ Flash BIOS DOS BIOS On Self Test Flash EZ Flash 1. POST EZ Flash Alt + PowerEZ F2 BIOS tw.asus.com BIOS 2. 3. POST EZ Flash F2 Alt + EZFlash starting BIOS update Checking for floppy... 4. BIOS EZ Flash BIOS EZFlash starting BIOS update Checking for floppy... Floppy found! Reading file “NCTD.rom”. Completed. Start erasing.......| Start Programming...| Flashed successfully. Rebooting. BIOS Floppy not found found NCTD.ROM NCTD.
4.1.5 Windows BIOS 1. BIOS 2. 3. BIOS BIOS 4. 5. BIOS BIOS BIOS ISP 1. 2. 3.
BIOS BIOS 1. 2. 3.
4. BIOS Next 5. BIOS BIOS BIOS BIOS BIOS BIOS 1. 2. 3. BIOS 4.
4.2 BIOS BIOS Basic Input and Output System BIOS BIOS BIOS RUN SETUP BIOS BIOS Flash ROM BIOS Flash ROM BIOS BIOS BIOS CMOS RAM BIOS POST Power-On Self Test DELETE DELETE RESET Ctrl + Alt + Delete BIOS 1. BIOS BIOS 4.7 2. 3. BIOS Load Setup Defaults BIOS http://tw.asus.
4.2.1 BIOS System Time System Date Legacy Diskette A Primary IDE Master Primary IDE Slave Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration [11:51:19] [Thu 05/07/2004] [1.44M, 3.5 in] : : : : : : [ST320413A] [ASUS CD-S520/A] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
4.2.4 System Time System Date Legacy Diskette A Primary IDE Master Primary IDE Slave Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration System Information Advanced Power Boot [11:51:19] [Thu 05/07/2004] [1.44M, 3.5 in] : [ST320413A] : [ASUS CD-S520/A : [Not Detected] : [Not Detected] : [Not Detected] : [Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
4.3 Main Menu BIOS 4.2.1 BIOS System Time System Date Legacy Diskette A Language Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. [11:51:19] [Thu 05/07/2004] [1.44M, 3.5 in] [English] Primary IDE Master Primary IDE Slave Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration : : : : : : Use [+] or [-] to configure system time.
4.3.5 IDE Primary, Third and Fourth IDE Master/Slave BIOS IDE IDE Enter Primary IDE Master Device : Hard Disk Vendor : ST320413A Size : 20.0GB LBA Mode : Supported Block Mode : 16 Sectors PIO Mode : Supported Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 SMART Monitoring: Supported Type LBA/Large Mode Block(Multi-sector Transfer) PIO Mode DMA Mode SMART Monitoring 32Bit Data Transfer Block Mode monitoring N/A Select the type of device connected to the system.
PIO Mode [Auto] PIO [Auto] [0] [1] [2] [3] [4] SMART Monitoring [Auto] Smart Analysis, and Reporting Technology [Enabled] Monitoring, [Auto] [Disabled] 32Bit Data Transfer [Disabled] 32 [Disabled] [Enabled] 4.3.6 IDE IDE Configuration IDE Enter IDE Configuration Onboard IDE Operate Mode Enhanced Mode Support On Configure S-ATA as RAID IDE Detect Time Out (Sec) When in AHCI/RAID mode SATA controller is forced to Native mode.
Onboard IDE Operate Mode [Compatible Mode] Compatible Mode Optoin [Primary P-ATA+S-ATA] IDE ATA ATA ATA ATA ATA [Primary P-ATA+S-ATA] [Secondary P-ATA+S-ATA] [P-ATA Ports Only] IDE Detect Time Out [35] ATA/ATAPI [0] [5] [10] [15] [20] [25] [30] [35] 4.3.6 System Information BIOS AMIBIOS Version : 08.00.10 Build Date : 06/24/04 Processor Type Speed Count : Intel(R) Xeon (TM) CPU 2.
4.4 Advanced menu Instant Music Configuration Speech Configuration PCI Express Configuration USB Configuration MPS Configuration Configure Instant Music CPU Configuration Chipset Onboard Devices Configuration PCI PnP 4.4.1 JumperFree Instant Music Option Instant Music JumperFree Configuration [Disabled] If enabled, power up by PS/2 keyboard function will be disabled.
4.4.2 Speech Configuration Speech Option Speech POST Reporter Report IDE Error Report System Booting [Enabled] [Disabled] [Disabled] Speech POST Reporter [Enabled] POST [Disabled] [Enabled] Speech POST Reporter [Enabled] Report IDE Error [Disabled] IDE [Disabled] [Enabled] Report System Booting [Disabled] [Disabled] [Enabled] 4.4.
4.4.4 USB USB Configuration USB Enables USB host controllers. USB Configuration Module Version - 2.23.2-9.4 USB Devices Enabled: None USB Function Legacy USB Support USB 2.0 Controller USB 2.0 Controller Mode [Enabled] [Auto] [Enabled] [HiSpeed] USB Function [Enabled] USB [Disabled] [Enabled] Legacy USB Support [Auto] USB [Auto] USB USB [Disabled] USB [Disabled] [Enabled] USB [Auto] USB 2.0 Controller [Enabled] USB 2.0 [Enabled] [Diabled] USB 2.0 Controller Mode [HiSpeed] USB 2.
4.4.5 MPS multi-processor Enter MPS Configuration MPS Revision Select MPS Revision. [1.4] MPS Revision [1.4] multi-processor [1.1] [1.4] 4.4.6 CPU Configuration Configure Advanced CPU settings Manufacturer: Intel Brand String: Intel(R) Xeon (TM) CPU 2.80GHz Frequency : 2800 MHz FSB Speed : 800 MHz Ratio Status: Unlocked Ratio Actual Value : 14 Ratio CMOS Setting: [ 8] Hyper Threading Technology [Enabled] Max CPUID Value Limit: [Disabled] Sets the ratio between CPU Core Clock and the FSB Frequency.
Hyper-Threading Technology [Enabled] Hyper-Threading [Disabled] [Enabled] Max CPUID Value Limit [Disabled] CPUID [Disabled] [Enabled] [Enabled] 4.4.7 Chipset Enter Advanced Chipset Settings Warning: Setting wrong values in below sections may cause system to malfunction. Options for NB.
NorthBridge Chipset Configuration DIMM Speed DDR2 400 Memory Remap Feature [Enabled] ENABLE: Allow remapping of overlapped PCI memory above the total physical memory. DISABLE: Do not allow remapping of memory.
4.4.8 OnBoard Devices Configuration Configure Win627EHF Super IO Chipset Serial Port1 Address [3F8/IRQ4] Serial Port2 Address [2F8/IRQ3] Parallel Port Address [378] Onboard Game/MIDI Port [Disabled] Allows BIOS to Select Serial Port1 Base Addresses.
4.4.9 PCI PCI PnP IRQ PCI/PnP DMA PCI/PnP NO: Lets the BIOS configue all the devices in the system. YES: Lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system. Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction.
PCI IDE BusMaster [Enabled] BIOS IDE PCI [Disabled] [Enabled] Offboard PCI / ISA IDE Card [Auto] PCI PCI IDE [Auto] [PCI Slot1] [PCI Slot2] [PCI Slot3] [PCI Slot4] [PCI Slot5] [PCI Slot6] IRQ-xx assigned to [PCI Device] [PCI Device] IRQ [Reserved] IRQ [PCI Device] [Reserved] DMA DMA DMA DMA DMA DMA Channel Channel Channel Channel Channel Channel 0 1 3 5 6 7 Reserved Memory Size [PCI [PCI [PCI [PCI [PCI [PCI PCI/PnP ISA Device] Device] Device] Device] Device] Device] [Disabled] +F1 F10 ESC Selec
4.5 Power menu APM ACPI Enter Suspend Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC Support Select the ACPI state used for System Suspend. [S3 only] [No] [No] [Enabled] APM Configuration Hardware Monitor 4.5.1 Suspend Mode [Auto] [S1 POS only] [S3 only] [Auto] 4.5.2 Repost Video on S3 Resume [No] BIOS S3/STR [Yes] [No] VGA 4.5.3 ACPI 2.0 Support [No] ACPI 2.0 [No] [Yes] 4.5.
4.5.5 APM Configuration APM Configuration Power Management/APM Video Power Down Mode Hard Disk Power Down Mode Suspend Time Out Throttle Slow Clock Ratio [Enabled] [suspend] [Suspend] [Disabled] [50%] Power Button Mode Restore on AC Power Loss [On/Off] [Power Off] Power Power Power Power Power Power [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] On On On On On On By PS/2 Keyboard By PS/2 Mouse Ring LAN By PME# By RTC Alarm Enable or disable APM.
Restore on AC Power Loss [Power Off] [Power Off] [Power On] [Last State] [Power Off] [Power On] [Last State] Power On By PS/2 Keyboard [Disabled] ATX 1 5VSB [Disabled] [Enabled] Power On By PS/2 Mouse [Disabled] [Enabled] PS2 1 [Disabled] [Enabled] ATX 5VSB Power On Ring [Disabled] [Enabled] [Disabled] [Enabled] Power On By PME# [Disabled] [Enabled] PME [Enabled] [Disabled] Power On By RTC Alarm [Disabled] RTC [Enabled] [Disabled] [Enabled] NCT-D 4-29
4.5.6 Hardware Monitor Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature CPU1 Fan Speed CPU2 Fan Speed Front1 Fan Speed Front2 Fan Speed Rear1 Fan Speed Rear2 Fan Speed Smart Fan Control VCORE1 Voltage VCORE2 Voltage 3.3V Voltage 5V Voltage 5VSB Voltage [49ºC/120ºF] [47ºC/114ºF] [47ºC/114ºF] [3884RPM] [2871RPM] [N/A] [N/A] [N/A] [N/A] [Disabled] [ 1.320V] [ 1.380V] [ 3.345V] [ 5.094V] [ 5.
VBAT Voltage 12V Voltage [ 3.120V] [12.053V] VCORE Voltage, +3.
4.6 Boot menu APM Configuration Boot Device Priority Boot Settings Configuration Security Enter F1 F10 ESC 4.6.1 Select Screen Select Item Go to Sub-screen General Help Save and Exit Exit Boot Device Priority Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device [1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360] [MBA v7.5.12 Slot 0] Specifies the boot sequence from the available devices.
4.6.2 Boot Settings Configuration Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Wait For ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture Quiet Boot Progress Bar Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
Interrupt 19 Capture [Disabled] PCI SCSI [Enabled] Interrupt 19 [Disabled] [Enabled] 4.6.3 Security Security Settings Supervisor Password User Password to change password. again to disabled password. : Not Installed : Not Installed Change Supervisor Password Boot Sector Virus Protection [Disabled] +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit Change Supervisor Password Supervisor Password 1. 2. 3.
Enter . BIOS RTC Security Settings Supervisor Password User Password CMOS 2.
User Password 1. Enter 2. Enter 3.
4.7 BIOS Exit menu BIOS BIOS Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Exit system setup after saving the changes. Load Setup Defaults F10 key can be used for this operation.
Load Setup Defaults F5 Enter [Ok] BIOS 4-38 [Cancel] BIOS BIOS
A-1 NCT-D .........................................
A-1 NCT-D TM TM Intel Xeon Processor Intel Xeon Processor with 800MHz system bus with 800MHz system bus System Bus 64bit, 800 MHz Four DDRII400 DIMM Slots PCI Express interface PCI Express Slot 1 X4 PCI Express X16 PCI Express (for Graphics) X1 PCI Express 4xDDR 400 DIMM slots (max. 8GB) PCI Express Slot 2 Intel E7525 MCH Gigabit LAN BCM5751 PCI-X bus (64Bit/66MHz) SMBus IDE 1 USB2.
2