Operating instructions

ManualsBrandsAsus ManualsLED displaysMM17DE

TABLE OF CONTENTS

IMPORTANT INFORMATION --------------------------------------------------------- 1

PRECAUTIONS ---------------------------------------------------------------------- 2

SPECIAL NOTES -------------------------------------------------------------------- 3

TAKE CARE OF THE MONITOR ------------------------------------------------ 3

BEFORE YOU OPERATE THE MONITOR ---------------------------------------- 4

FEATURES ---------------------------------------------------------------------------- 4

PACKING LIST ----------------------------------------------------------------------- 4

INSTALLATION INSTRUCTIONS ---------------------------------------------- 5

ADJUSTING THE VIEWING ANGLE ------------------------------------------- 7

OPERATING INSTRUCTIONS ------------------------------------------------------- 8

GENERAL INSTRUCTIONS ------------------------------------------------------ 8

HOW TO RECONFIGURE ---- -------------------------------------------------- 9

OSD MENU TABLE ---------------------------------------------------------------- 10

PLUG AND PLAY ------------------------------------------------------------------- 12

TROUBLESHOOTING (FAQ) --------------------------------------------------------- 13

ERROR MESSAGE & POSSIBLE SOLUTION ---------------------------- 14

APPENDIX ---------------------------------------------------------------------------------- 15

SPECIFICATIONS ------------------------------------------------------------------- 15

PRESET TIMING TABLE ---------------------------------------------------------- 16

CONNECTOR PIN ASSIGNMENT ---------------------------------------------- 17

Downloaded from ManualMonitor.com Manuals

Summary of content (18 pages)

PAGE 1
TABLE OF CONTENTS IMPORTANT INFORMATION --------------------------------------------------------PRECAUTIONS ---------------------------------------------------------------------SPECIAL NOTES -------------------------------------------------------------------TAKE CARE OF THE MONITOR ------------------------------------------------ 1 2 3 3 BEFORE YOU OPERATE THE MONITOR ---------------------------------------FEATURES ---------------------------------------------------------------------------PACKING LIST ---
PAGE 2
IMPORTANT INFORMATION Before operating the monitor, please read this User Guide thoroughly. This User Guide should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
PRECAUTIONS l Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. l Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
PAGE 4
SPECIAL NOTES The following symptoms are normal with the monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.
PAGE 5
BEFORE YOU OPERATE THE MONITOR FEATURES • • • • • • • • • • • • • 43.2cm(17”) TFT Color LCD Monitor. Recommended Resolutions: SXGA 1280 X 1024 @60Hz. 8ms (Tr+Tf) Quick Response Time. SPLENDID™ Video Enhancement Technology. 5 Video Preset Modes Switiched by Hotkey 3 Skin-Tones Selection for Users’ Preference. Microsoft Windows 95/98/2000/XP Compliance VESA Display Data Channel (DDC)1/2B Compliance VESA Wall Mount Compliance (100x100mm). EPA ENERGY STAR® and Ergonomic Design.
PAGE 6
INSTALLATION INSTRUCTIONS ASSEMBLING THE MONITOR BASE Install Remove Figure 1 POWER CORD / POWER SOURCE 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the power cord into your LCD monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet.
PAGE 7
MAKING THE CONNECTIONS Connecting the Signal Cable: Plug one end of the VGA Cableto the LCD monitor’s VGA port, the other end to the computer's VGA socket and tighten the two screws on the cable connector. Moreover, for MM17T, you can buy an extra 24-Pin DVI-D cable from your dealer for the digital signal connection if preferred. Connecting the Power Cord: Plug one end of the AC-power cord to the LCD monitor’s AC input socket, the other end to the power outlet.
PAGE 8
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5° to 20°. Figure 3 NOTES • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
PAGE 9
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the LCD monitor on or off. The other control buttons are located on the front bezel (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the signal cable from the LCD monitor to your computer. • Press the power button to turn on the LCD monitor. The power indicator will light up. Figure 4 1.
PAGE 10
• Activate Brightness adjustment menu. • Increase the level of the function selected or move to the next function as the OSD menu is activated. 5. Menu Button : • Activate the OSD (On-Screen Display) main menu. • Enter/select the icon(function) highlighted as the OSD menu is activated. HOW TO RECONFIGURE 1. Press the MENU-button to activate the OSD main menu (Figure 5). 2. Press or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it.
PAGE 11
OSD MENU TABLE The table describes the function of each OSD icon Main Menu Main Sub Sub Item Menu Menu Menu Icon Item Icon Scenario Description Scenery Mode Advance for scenery use with SPLENDID™ Video Enhancement Standard Mode Advance for general Windows use (SPLENDID™ Off) Theater Mode Advance for movie use with SPLENDID™ Video Enhancement Game Mode Advance for game use with SPLENDID™ Video Enhancement Night Mode Advance for dark-display use with SPLENDID™ Video Enhancement RGB Color R Color
PAGE 12
OSD VPosition Adjust vertical position of the OSD OSD Timeout Adjust OSD timeout Focus Input Select Adjust image Phase to reduce Horizontal-line noise of the image Clock Adjust image Clock to reduce Vertical-line noise of the image Image H-Position Adjust horizontal Position position of the image V-Position Adjust vertical position of the image Auto Automatically adjust the horizontal /vertical positions, phase and clock of the image Select an input signal from analog/digital source (MM17T only) Info
PAGE 13
PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.
PAGE 14
TROUBLESHOOTING (FAQ) Problem & Question Power LED is not ON The Power LED lights amber and there is no screen image Screen image is too light or dark Screen image is not centered or sized properly Screen image bounces or a wave pattern is present in the image Screen image has color defects (white does not look white) Screen image is blurry or fuzzy No sound or sound is low (MM17T only). Possible Solution l Press the Power Button to check if the monitor is in the ON mode.
PAGE 15
ERROR MESSAGE & POSSIBLE SOLUTION NO SIGNAL︰ 1. 2. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. Check the signal-cable’s connection pins for damage. OUT OF RANGE︰ Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following Preset Timing Table. Downloaded from ManualMonitor.
PAGE 16
APPENDIX SPECIFICATIONS Model MM17T Visible Diagonals Screen Size Max. Resolution MM17D 17.0" (43.2cm) Horizontal : 337.92mm, Vertical : 270.34mm SXGA 1280x1024@75Hz Pixel Pitch 0.264mm Brightness 300cd/㎡ (Typ.), 400cd/㎡ (Max.) Contrast Ratio 500:1 (Typ.), 600:1 (Max.) Viewing Angle (CR≧10) 150°(H)/ 130°(V) Display Colors 16.2M Response Time 8ms Signal Frequency Horizontal: 30~80 kHz, Vertical: 55 ~ 75Hz Max.
PAGE 17
PRESET TIMING TABLE HORIZONTAL FREQUENCY VERTICAL FREQUENCY STANDARD RESOLUTION Dos-mode 640 × 350 31.47kHz 70Hz Dos-mode 720 × 400 31.47kHz 70Hz 640 × 480 31.47kHz 60Hz 640 × 480 35.00kHz 66.6Hz 640 × 480 37.50kHz 75Hz 640 × 480 37.86kHz 72Hz 800 × 600 37.879kHz 60Hz 800 × 600 46.875kHz 75Hz 800 × 600 35.16kHz 56Hz 800 × 600 48.01kHz 72Hz 832 × 624 49.725kHz 75Hz 1024 × 768 48.363kHz 60Hz 1024 × 768 56.476kHz 70Hz 1024 × 768 60.02kHz 75Hz 1280 × 1024 64.
PAGE 18
CONNECTOR PIN ASSIGNMENT 1 5 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. DESCRIPTION Red Green Blue TXD Ground R-Ground G-Ground B-Ground PIN NO. DESCRIPTION 9. 10. 11. 12. 13. 14. 15. +5V Detect Cable RXD DDC-Serial Data H-Sync V-Sync DDC-Serial Clock 24 - Pin Color Display Signal Cable(MM17T only) DESCRIPTION PIN NO. DESCRIPTION PI N NO. 1. 2. 3. TMDS Data 2TMDS Data 2+ TMDS Data 2/4 Shield TMDS Data 4TMDS Data 4+ DDC Clock DDC Data 13. 14. 15.