Mini PC PB60 Series User Manual
E13946 First Edition May 2018 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual..................................................................................................................5 Conventions used in this manual.....................................................................................6 Typography..............................................................................................................................6 Package contents.................................................................................................
Contents Appendix Safety information..................................................................................................................36 Setting up your system........................................................................................................36 Care during use.......................................................................................................................36 Regulatory notices..........................................................................
About this manual This manual provides information about the hardware and software features of your Mini PC, organized through the following chapters: Chapter 1: Getting to know your Mini PC This chapter details the hardware components of your Mini PC. Chapter 2: Using your Mini PC This chapter provides you with information on using your Mini PC.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and prevent damage to your Mini PC's data and components.
Package contents Your Mini PC package contains the following items: Mini PC PB60 AC power adapter* Power cord* Technical documents ASUS Mini PC PB60 Series 7
NOTE: • • • • 8 *The bundled power adapter may vary by model and territories. Some bundled accessories may vary with different models. For details on these accessories, refer to their respective user manuals. The device illustration is for reference only. Actual product specifications may vary with models.
1 Getting to know your Mini PC
Features Front view USB 3.1 Gen 1 port The USB 3.1 Gen 1 (Universal Serial Bus) port provides a transfer rate up to 5 Gbit/s. These ports also support the Battery Charging 1.2 technology that allows you to charge your USB devices. NOTE: This port provides a maximum of 5V / 1.5A output. Power button The power button allows you to turn the Mini PC on or off. You can use the power button to put your Mini PC to sleep mode or press it for four (4) seconds to force shutdown your Mini PC.
Air vents (intake vent) The air vents allow cooler air to enter your Mini PC chassis. IMPORTANT: For an optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions. USB 3.1 Gen 1 Type-C™ port This USB Type-C™ (Universal Serial Bus) port provides a transfer rate of up to 5 Gbit/s. USB 3.1 Gen 2 port The USB 3.1 Gen 2 (Universal Serial Bus) port provides a transfer rate up to 10 Gbit/s. USB 3.1 Gen 1 port The USB 3.
Rear view Wireless antenna jack The jack is used to connect the supplied wireless antenna to enhance wireless signal reception. Air vents (exhaust vent) The air vents allow your Mini PC chassis to expel hot air out. IMPORTANT! For optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions. CAUTION! Be careful of the hot air expelled at the air vents as it may cause discomfort or injuries.
Power input The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Mini PC. To prevent damage to the Mini PC, always use the supplied power adapter. WARNING! The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body. USB 2.0 port The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.
NOTE: This port may vary per model. VGA port (on selected models) This port allows you to connect your Mini PC to an external display. Serial (COM) connector (on selected models) The 9-pin serial (COM) connector allows you to connect devices that have serial ports such as mouse, modem, or printers. DisplayPort (on selected models) This port allows you to connect your Mini PC to an external display.
Using your Mini PC 2
Getting started Mounting your PC on the stand To mount your PC on the stand: 1. Locate the mounting holes at the bottom of your PC. 2. Align the stand’s mounting hole with the mounting hole on your PC, then secure it in place with the stand screws.
Connect the AC power adapter to your Mini PC To connect the AC power adapter to your Mini PC: A. Connect the power cord to the AC power adapter. B. Connect the DC power connector into your Mini PC’s power (DC) input. C. Plug the AC power adapter into a 100V~240V power source. NOTE: The power adapter may vary in appearance, depending on models and your region.
NOTE: The power adapter may vary between models and territories, please refer to the following for more information on the different adapters: 65W Power adapter • Input voltage: 100-240 Vac • Input frequency: 50-60 Hz • Rating output current: 3.42 A (65 W) • Rating output voltage: 19 V 90W Power adapter • Input voltage: 100-240 Vac • Input frequency: 50-60 Hz • Rating output current: 4.
Connect a display panel to your Mini PC You can connect a display panel or projector to your Mini PC that has the following connectors: • VGA connector • DisplayPort • HDMI connector NOTE: These ports may vary per model. To connect a display panel to your Mini PC: Connect one end of a VGA, DisplayPort, or HDMI cable to an external display, and the other end of the cable to your Mini PC’s VGA port, DisplayPort, or an HDMI port.
Connect display via DisplayPort Connect display via HDMI port 20 ASUS Mini PC PB60 Series
Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your Mini PC. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your Mini PC: Connect the USB cable from your keyboard and mouse to any of the USB ports of your Mini PC. NOTE: The keyboard varies with country or region.
Turn on your Mini PC Press the power button to turn on your Mini PC.
Turning your Mini PC off If your Mini PC is unresponsive, press and hold the power button for at least four (4) seconds until your Mini PC turns off. Putting your Mini PC to sleep To put your Mini PC on Sleep mode, press the Power button once. Entering the BIOS Setup BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the Mini PC. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance.
Load default BIOS settings To load the default values for each of the parameters in your BIOS: • Enter the BIOS by pressing or on the POST screen. NOTE: POST (Power-On Self Test) is a series of software controlled diagnostic tests that run when you turn on your Mini PC. • • • 24 Navigate to the Exit menu. Select the Load Optimized Defaults option, or you may press . Select OK to load the default BIOS values.
3 Upgrading your Mini PC
IMPORTANT! • • I t is recommended that you install or upgrade the memory modules, wireless card, and solid state drive (SSD), under professional supervision. Visit an ASUS service center for further assistance. Ensure that your hands are dry before proceeding with the rest of the installation process. Before installing any of the features in this guide, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static electricity.
Replacing the top cover Replace the top cover and push it towards the rear, then secure it with the screw removed previously.
Installing 2.5” HDD or SSD 1. Remove the four (4) screws, then lift the storage bay to remove it from the chassis. 2. Insert your HDD or SSD into the storage bay, then secure it with four (4) screws. 3. Connect the SATA cable to the HDD or SSD.
4. Lift the flap on the SATA connector (A), connect the SATA cable to the SATA connector, then push the flap down to secure the cable (B). 5. Replace the storage bay and secure it with the four (4) screws removed previously.
Installing the M.2 SSD (on selected models) (optional) Remove the storage bay if a storage bay is installed. Follow step 2 under the Installing 2.5” HDD or SSD section to remove the storage bay. To install 2242 M.2 SSD Align and insert the 2242 M.2 SSD into its slot inside the Mini PC, then gently push down the M.2 SSD on top of the screw hole and fasten it using one of the bundled 3mm round screws.
To install 2280 M.2 SSD 1. Remove the stand screw and install it into the 2280 M.2 screw hole. 2. Align and insert the 2280 M.2 SSD into its slot inside the Mini PC, then gently push down the M.2 SSD on top of the screw hole and fasten it using one of the bundled 3mm round screws.
Installing top memory module IMPORTANT! • • • efer to http://www.asus.com for the list of compatible DIMMs. R You can only install DDR4 SO-DIMMs to the Mini PC’s DIMM slot. Only ASUS-authorized technicians should remove and install motherboard and mechanical parts inside your Mini PC. Please refer to the terms and conditions in the warranty card. Visit an authorized ASUS service center or retailer for information on module upgrades for your Mini PC. 1.
3. Align and insert the memory module into the slot (A) and press it down (B) until it is securely seated in place.
Installing an external button 1. Remove the metal cover of the external button port. CAUTION! Take extra care when removing the metal cover. Use tools such as a screw driver to bend and remove the metal cover to avoid physical injury. 2. Insert the external button connector through the external button port and connect it to one of the following 2-pin headers: Header name Description PWRBTN_HEADER Power on or power off the Mini PC. CLRTC Clear the Real Time Clock (RTC) RAM in CMOS.
Appendix
Safety information Your Mini PC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation.
• If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. – The power cord or plug is damaged. – Liquid has been spilled into the system. – The system does not function properly even if you follow the operating instructions. – The system was dropped or the cabinet is damaged. – The system performance changes. Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced.
Regulatory notices REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/ english/REACH.htm ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ISED Radiation Exposure Statement for Canada This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with ISED RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Wireless Operation Channel for Different Domains N. America 2.412-2.462 GHz Ch01 through CH11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13 Regional notice for Singapore Complies with IMDA Standards DB103778 This ASUS product complies with IMDA Standards. Regional notice for California WARNING! This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com Technical Support Telephone +86-21-38429911 Fax +86-21-5866-8722, ext. 9101# Online support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=en ASUS COMPUTER INTERNATIONAL (America) Address Telephone Fax Web site Technical Support Support fax Telephone Online support 48720 Kato Rd.
ASUS Mini PC PB60 Series