Quick Start Guide

Lyra Voice
Wireless-AC2200 Tri Band
Gigabit Router
Quick
Start Guide
1
Plug the adapter into the DCIN port, and press the power switch.
2
The blue LED light will start to spin for about 1~2 minutes, the light bar will then change to a white LED and start
spinning after booting up.
Hardware Explanations
Button Explanations
WAN PORT
Connect your modem to this port with a network cable.
LAN PORT
Connect your PC to this LAN port with a network cable.
If you are preparing to setup
a stand alone router
01
BEFORE SETTING
1
Go to SETUP LYRA VOICE AS ROUTER.
If you are preparing to setup
an AiMesh WiFi system
02
SETUP LYRA VOICE AS A ROUTER
Connect First Lyra Voice Node to Modem
01
1
Download the free ASUS Router app.
Modem back
2
Unplug the power cable from your DSL modem.
** Remove the battery if it has one.
** If you are using DSL for internet, you will need
a username/password from your internet service
provider (ISP) to properly configure your router.
Modem back
3
Connect your modem to any Lyra Voice node
using the network cable provided via the port
labeled “WAN”.
4
Power on your modem and check its LED lights
to ensure the connection is active.
Setting Up Your Lyra Voice Wi-Fi System
02
1
Launch the ASUS Router app on your mobile device,
and follow the instructions.
1
Refer to Setup Lyra Voice as Router
Mute
Volume up
Volume down
Set
1
To be the 1st router of AiMesh System.
2
To be the 2nd or 3rd node of AiMesh System.
If you are preparing to
setup Lyra Voice as a
repeater
03
1
Go to SETUP LYRA VOICE AS REPEATER.
** Make sure your device supports BLE, Bluetooth
4.0 or above.
5
Plug in the power adapter to the Lyra
Voice node and wait until the LED turns to
white and starts spinning to ensure that
your Lyra Voice is ready for setup. The
node connected to the modem directly will
become your primary Lyra Voice node.
ASUS Router app
SETUP AS AN AiMesh SYSTEM
Set up your router01
1
Launch the ASUS Router app and
click the “+” icon on the upper right
corner. Choose Add AiMesh node
to current network and follow the
instructions to complete.
Adding Lyra Voice Nodes
02
1
Your Amazon account can
be changed or set after
completing the QIS (Quick
Internet Setup), remember
to enable your Amazon
account on each node to
enjoy using Amazon Alexa.
Amazon Account Linking03
Search for
WE SUGGEST...
Note: You will need to sign-
in to your Amazon account
to use Amazon Alexa with
your Lyra Voice device.
Please refer to the section
“Just Ask Alexa” for more
details on using Alexa.