Motherboard K8N-DL
T1905 1.0 2005 3 © 2005 1.22 1.24 ...
.................................................................................................... vii ....................................................................................... viii ............................................................................. viii ................................................................................................... ix ................................................................................... ix .........................................
2.4.2 .................................................................................. 2-12 2.4.3 .......................................................................... 2-13 2.4.4 .......................................................................... 2-13 ............................................................................................... 2-14 2.5 2.5.1 .................................................................................. 2-14 2.5.2 ................................
4.1.4 EZ Flash BIOS 4.1.5 CrashFree BIOS 2 ............................................. 4-5 ............................... 4-6 BIOS 4.1.6 ................................................................................ 4-8 4.2 BIOS ..................................................................................... 4-10 4.2.1 BIOS .................................................................... 4-11 4.2.2 ...................................................................... 4-11 4.2.
4.4.2 Memory Configuration 4.4.3 Chipset 4.4.4 .............................................................. 4-22 Onboard Devices Configuration 4.4.5 PCI 4.4.6 USB PCI PnP USB Configuration Power Menu 4.5 4.5.1 ............................................... 4-30 ................................................................... 4-31 Hardware Monitor Boot Menu 4.6 4.6.2 ............................... 4-32 ......................................... 4-34 .....................................
¥ ¥ ¥ ¥ ¥ / ¥ ¥ ¥ ¥ ¥ ¥ ¥ K8N-DL vii
K8N-DL • K8N-DL K8N-DL K8N-DL • • • BIOS BIOS BIOS • viii
Pin Jumper Mode [1-2] JumperFree ™ Mode [2-3] 1 2 Jumper Mode 2 3 Jumper Free (Default) 1. http://tw.asus.com 2.
AMD OpteronTM 64 Socket 940 AMD64 32 32 64 NVIDIA CK8-04 Professional 1600 2000 MT/s 184 DDR DIMM ECC 400/333/266 MHz DDR DIMMs 24GB 4GB DDR 12GB PCI Express x16 PCI Express x1 PCI NVIDIA CK8-04 Professional - UltraDMA 133/100/66/33 SATA-II 3Gb/s RAID 0 RAID 1 RAID 0+1 Silicon Image 3114R RAID SATA-I 150MB/s RAID 0 RAID 1 RAID 0+1 S/W RAID 5 BROADCOM® BMC5751 Gigabit PCI-E LAN Realtek® ALC850 Audio Sensing and Enumeration S/PDIF Universal Audio Jack IEEE 1394 USB T1 1394a IEEE 1394 USB2.0 USB2.
PS/2 PS/2 USB 2.0 IEEE 1394 RJ-45 S/PDIF S/PDIF I/O IDE Serial ATA RAID Serial ATA CPU 24-pin ATX 8-pin ATX 12V USB CD/AUX USB 2.0 IEEE 1394 /MIDI BIOS 4Mb Flash ROM ,Phoenix-Award BIOS, PnP, DMI2.0,WfM2.0,SM BIOS 2.3 ATX 24-pin 8-pin 12V ATX12V 2.0 ATX 12 x 10.5 30.5 x 26.
xii
K8N-DL K8N-DL K8N-DL
1.1 ......................................... 1-1 1.2 ...................................................................... 1-1 1.3 ...................................................................... 1-2 1.3.1 .............................................................. 1-2 1.3.2 ................................................
1.1 K8N-DL K8N-DL 1.2 K8N-DL I/O USB/ 1394 Serial ATA Serial ATA 40 IDE 3.
1.3 1.3.
SATA RAID Serial ATA RAID RAID Silicon Image® Sil 3114 Serial RAID SATA RAID 0 RAID 1 RAID 0+1 RAID 5 NVIDIA® nForce4® PRO SATA PATA RAID 0 RAID 1 RAID 0+1 JBOD 16-bit DAC 2.3 ALC850 PC 16-bit ADC AC97 S/PDIF S/PDIF K8N-DL Sony S/PDIF Sony-Philips Digital Interface / Philips / DVD 5.1 IEEE 1394a IEEE 1394 IEEE 1394a IEEE 1394 400Mbps USB 2.0 12 Mbps USB 2.0 USB 2.0 USB 2.0 480 Mbps USB 1.1 USB 2.0 USB 1.
1.3.
2.1 .............................................................. 2-1 2.2 .................................................................. 2-3 2.3 CPU ................................................... 2-7 2.4 ................................................................ 2-11 2.5 .................................................................... 2-14 2.6 ................................................................ 2-17 2.7 ..............................................
2.1 1. 2. 3. 4. 5.
CPU CPU CPU CPU_WARN1 CPU CPU1 CPU1 CPU_WARN1 ® K8N-DL K8N-DL CPU warning LED 2-2 ON OFF CPU1 install fail CPU install well
2.2 2.2.1 PS/2 PS/2 COM1/2 2.2.
2.2.3 26.7cm (10.5in) ATX12V1 PS/2KBMS T: Mouse B: Keyboard CPU_FAN2 KBPWR1 SOCKET 940 CPU1 CD1 30.5cm (12in) SOCKET 940 CPU_FAN1 FP_AUDIO1 ATXPWR1 Top:Line In Center:Line Out Below:Mic In SEC_IDE1 Top: Center/Subwoofer Middle: Side surround L/R Bottom: Rear Surround L/R DDR DIMM_B2 (72 bit, 184-pin module) USB2.
2.2.4 1. CPU sockets P.2-6 2. DDR DIMM slots P.2-11 3. PCI/PCI Express slots P.2-16 PCI PCI Express 1. Clear RTC RAM P.2-17 CMOS 2. Keyboard power P.2-18 3-pin CLRTC1 3-pin KBPWR1 3.1394 controller settingP.2-18 1394 3-pin 1394_EN1 4.Gigabit LAN controller setting P.2-19 LAN 5.RAID controller setting 3-pin LAN1_EN1 P.2-19 RAID 1. PS/2 mouse port P.2-20 2. Parallel port P.2-20 3. IEEE 1394a P.2-20 3-pin RAID_EN1 PS/2 IEEE 1394 4. LAN 1 port RJ-45 P.2-20 5. Side Speaker out port P.
1. Floppy disk connector P.2-22 2. Primary IDE connector P.2-23 IDE 34-1 pin FLOPPY 3. Serial ATA connectors P.2-24 SATA RAID SATA4 40-1 pin PRI_IDE,SEC_IDE 7-pin SATA1, SATA2, SATA3, 4. Serial ATA RAID connectors P.2-25 SATA RIAD 7-pin SATA_RAID1, SATA_RAID2 , SATA_RAID3 , SATA_RAID4 5. CPU,front,rear fan P.2-25 CPU 3-pin CPU_FAN1, CPU_FAN2 ,FRNT_FAN1,FRNT_FAN2, REAR_FAN1,REAR_FAN2 6.Backplane SMBus P.2-26 7.USB connector P.2-26 USB 2.0 USB910 8.IEEE 1394 connector P.
2.3 CPU 2.3.1 940 AMD¤ OpteronTM 64 ZIF AMD® OpteronTM 64 64 128 32 2.3.2 1.
2. Socket-940 90 Socket-940 3. 4. 5.
2.3.3 AMD Opteron 64TM 1.
2. 3. 4.
2.3.4 CPU_FAN1 CPU_FAN2 CPU_FAN2 Rotation +12V GND CPU_FAN2 CPU_FAN1 ® CPU_FAN1 K8N-DL Rotation +12V GND K8N-DL CPU fan connectors CPU monitoring errors Hardware 2.4 2.4.
1 CPU 1 A DIMM_A1 DIMM_A2 B DIMM_B1 DIMM_B2 CPU 2 A DIMM_A3 B DIMM_B3 2.4.2 256MB 512MB 1GB 2GB 4GB Registered ECC DDR DIMM 1. CPU DIMM_A1+DIMM_A2=DIMM_B1+DIMM_B2 CPU DIMM_A1+DIMM_A2=DIMM_B1+DIMM_B2=DIMM_A3+DIMM_B3 2. DIMM_A1 DIMM_A2 3. DIMM_A1 4. 5.
2.4.3 / 1. 2. DDR DIMM 3. 4. 2.4.4 1. 2.
2.5 2.5.1 1. 2. 3. 4. 5. 6. 2.5.2 1. BIOS BIOS 2. 3.
2.5.
2.5.4 PCI 32 USB PCI SCSI PCI PCI PCI PCI 2.5.5 PCI Express x16 x16 PCI Express PCI Express x16 2.5.
2.6 1. CMOS CLRTC CMOS CMOS 1. 2. 3. CLRTC [1-2] [2-3] CMOS [1-2] 4. 5. 6. Del BIOS BIOS CMOS CLRTC CLRTC1 ® 1 2 K8N-DL K8N-DL Clear RTC RAM 2 3 Normal (Default) Clear CMOS C.P.
2. 3-pin KBPWR1 [2-3] [1-2] +5VSB +5V 1A/ +5VSB BIOS KBPWR1 1 2 +5V (Default) ® 2 3 +5VSB K8N-DL K8N-DL Keyboard power setting 3.
4. Gigabit LAN (3-pin LAN1_EN1) [1-2] Broadcom BCM5751 Gigabit LAN1 Gigabit LAN LAN1_EN1 ® 2 1 Enable (Default) K8N-DL 3 2 Disable K8N-DL CPU LAN1_EN setting 5.
2.7 2.7.1 1 2 3 4 5 6 7 8 9 16 15 13 14 1. PS/2 12 11 10 PS/2 2. 3. IEEE 1394a 4. LAN1 RJ-45 Area Network LAN Local ACT/LINK SPEED 10Mbps 100Mbps 1Gbps 5. 6. 7. 8. 9. 10.
11. USB 2.0 USB 2.0 3 4 USB 12. USB 2.0 USB 2.0 1 2 USB 13. COM1 COM1 14. S/PDIF 15. S/PDIF 16.
2.7.2 1. 34-1 pin FLOPPY1 FLOPPY1 ® PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. K8N-DL K8N-DL Floppy disk drive connector 2. IDE 40-1 pin PRI_IDE1, SEC_IDE1 IDE IDE IDE MO Secondary UltraDMA133/100/66/ Master CD-ROM ZIP Primary Slave 33 IDE UltraDMA133/100/66/33 IDE Slave 1. UltraDMA133/100/66/33 UltraDMA133/100/66/33 IDE 2. UltraDMA UltraDMA133/100/66/33 SEC_IDE1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
3.
4.
5. 3-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2, REAR-FAN1, REAR_FAN2 41.76 350 2000 +12 24 1 3.48 +12V GND • • CPU CPU_FAN1 ASUS Smart Q-Fan CPU • CPU_FAN1 Rotation +12V GND CPU_FAN2 CPU_FAN2 Rotation +12V GND CPU_FAN1 FRNT_FAN1 REAR_FAN1 REAR_FAN2 FRNT_FAN1 K8N-DL FRNT_FAN2 K8N-DL Fan connectors 6.
7. 24-pin EATXPWR1, 8-pin ATX12V1 ATX +12V 24 EATXPWR1 +12V 1. 8-pin ATX12V1 2.
8. USB 10-1 pin USB56, USB78 USB910 USB USB USB USB 1.1 480 Mbps USB 2.0 12 Mbps 40 USB+5V USB_P6USB_P6+ GND NC USB+5V USB_P8USB_P8+ GND NC 1 K8N-DL USB 2.0 connectors 1394 9.IEEE 1394 USB56 USB+5V USB_P7USB_P7+ GND USB78 USB910 1 1 USB+5V USB_P9USB_P9+ GND K8N-DL USB+5V USB_P5USB_P5+ GND ® USB+5V USB_P10USB_P10 + GND NC USB 2.
10. 4-pin CD1 MPEG CD1 ® Left Audio Channel Ground Ground Right Audio Channel (Black) K8N-DL K8N-DL Internal audio connector 11.
12. 10-1 pin FP_AUDIO1 Intel / LINE_OUT_R/BLINE_OUT_R LINE_OUT_L/BLINE_OUT_L FP_AUDIO1 ® K8N-DL MIC2 MICPWR Line out_R NC Line out_L AGND +5VA BLINE_OUT_R BLINE_OUT_L K8N-DL Front panel audio connector /MIDI 16-1 pin GAME1 /MIDI /MIDI /MIDI MIDI +5V J1B2 J1CY GND GND J1CX J1B1 +5V /MIDI ® K8N-DL GAME1 K8N-DL Game connector MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V 13.
14. 20-pin PANE1L MLED SPKO +5V Ground Ground Speaker PLEDMLED+ MLED- PLED+ PLED ® HD_LED K8N-DL Reset GND PWR GND HD_LED+ HD_LED- PANEL1 RESET PWRSW * Requires an ATX power supply.
3.1 ........................................................... 3-1 3.2 ...................................................................... 3-2 3.3 POST ......................................................
3.1 1. 2. 3. 4. / 5. a. b. c. SCSI ATX 6. ATX 30 7.
3.2 ATX 3.2.1 Windows® 2000 1. 2. 3. Windows Windows XP 1. 2. 3. Windows 3.2.2 BIOS BIOS 4.
3.3 POST POST ReporterTM Winbond POST POST POST Winbond Voice Editor 3.3.1 POST POST POST CPU CPU 2.3 • • • DDR • • • 2.4 • PCI-Express • 1.5V AGP VGA • CPU • • • • 4.4 BIOS PS/2 PS/2 2.7.
POST CPU • CPU • CPU • CPU • • • • POST 4.4.
3.3.2 POST 5.2.
1. Load 2. Open Voice1 3. 4.
POST POST 1. POST 2. wave 3. 1Mbit Windows 4. wave .WAV 8 22Khz 5. Add 6.
7. POST Edit Editor Event Sound 8. wave Voice1 9. OK 10. 7 9 11. Save 12. .flh 13. Write EEPROM 14. Confirm Yes 1. 2. 3.
BIOS BIOS BIOS BIOS
4.1 BIOS .......................................................... 4-10 4.2 BIOS 4.3 ......................................... 4-1 Main Menu .............................................. 4-14 4.4 Advanced menu 4.5 Power menu 4.6 Boot menu 4.7 BIOS .................................. 4-18 ........................................ 4-31 ........................................... 4-37 Exit menu ..................................
4.1 BIOS BIOS Basic Input/Output System 1. Award BIOS Flash Utility DOS 2. ASUS EZ Flash POST BIOS 3. ASUS CrashFree BIOS 2 BIOS BIOS 4. ASUS Update Windows BIOS Power-On Self Test BIOS BIOS BIOS BIOS AFUDOS 4.1.1 1. DOS S 1.44MB Enter DOS format A:/ Windows XP a. b. c. d. c. 1.44MB Windows 3 1/2 File Format Floppy Disk Create a MS-DOS startup disk Format 3 1/2 Windows 2000 a. b. c. d. e. 2. 1.44MB Windows 2000 Run D:\bootdisk\makeboot a: D Enter BIOS K8N-DL 4-1
4.1.2 AwardBIOS Flash BIOS AwardBIOS Flash BIOS BIOS 1. http://tw.asus.com K8N-DL.BIN BIOS BIOS 2. 3. 4. 5. support CD A:> AwardBIOS Flash Utility awdflash.exe AwardBIOS Flash Utility awdflash BIOS BIOS AwardBIOS Flash Utility for ASUS V1.01 (C) Phoenix Technologies Ltd. All Rights Reserved For NF-KC804-K8N-DL-00 DATE: 02/01/2005 Flash Type - SST 49LF004A/B /3.3V File Name to Program: Message: Please input File Name! 6. BIOS AwardBIOS Flash Utility for ASUS V1.
8. AWDFLASH AwardBIOS Flash Utility for ASUS V1.01 (C) Phoenix Technologies Ltd. All Rights Reserved AWDFLASH For NF-KC804-K8N-DL-00 DATE: 02/01/2005 Flash Type - SST 49LF004A/B /3.3V File Name to Program: 1001.bin Program Flashing Memory - OFE00 OK 1234567890123456789012 1234567890123456789012 1234567890123456789012 12 12 12 Write OK 123 123 123 No Update 12 12 12 Write Fail Warning: Don’t Turn Off Power Or Reset System! 9. Flashing Complete AwardBIOS Flash Utility for ASUS V1.
4.1.3 BIOS AwardBIOS Flash BIOS BIOS BIOS BIOS BIOS 1. 2. 1~6 BIOS AwardBIOS Flash Utility for ASUS V1.01 (C) Phoenix Technologies Ltd. All Rights Reserved For NF-KC804-K8N-DL-00 DATE: 02/01/2005 Flash Type - SST 49LF004A/B /3.3V File Name to Program: 1001.bin Save current BIOS as: Message: 3. Save current BIOS as: BIOS AwardBIOS Flash Utility for ASUS V1.01 (C) Phoenix Technologies Ltd. All Rights Reserved For NF-KC804-K8N-DL-00 DATE: 02/01/2005 Flash Type - SST 49LF004A/B /3.
4.1.4 EZ Flash EZ Flash DOS F2 BIOS BIOS EZ Flash BIOS Power-On Self Test POST Alt + EZ Flash EZ Flash BIOS 1. tw.asus.com BIOS K8NE.ROM 2. 3. POST Alt + F2 EZ Flash Insert Disk then press Enter or ESC to continue POST Floppy ¥ not found ¥ 4. BIOS K8NE.ROM not found BIOS K8NE.ROM BIOS EZ Flash BIOS BIOS AwardBIOS Flash Utility for ASUS V1.01 (C) Phoenix Technologies Ltd. All Rights Reserved For NF-KC804-K8N-DL-00 DATE: 02/01/2005 Flash Type - SST 49LF004A/B /3.
4.1.5 CrashFree BIOS 2 BIOS CrashFree BIOS 2 BIOS BIOS BIOS 1. BIOS BIOS 2. BIOS BIOS 4.1.1 BIOS 1. 2. BIOS Award BootBlock BIOS v1.0 Copyright (c) 2000, Award Software, Inc. BIOS ROM checksum error Detecting IDE ATAPI device... 3. BIOS BIOS BIOS Award BootBlock BIOS v1.0 Copyright (c) 2000, Award Software, Inc. BIOS ROM checksum error Detecting IDE ATAPI device... Found CDROM, try to Boot from it... Pass BIOS 4. 4-6 BIOS K8NE.
BIOS 1. 2. BIOS Award BootBlock BIOS v1.0 Copyright (c) 2000, Award Software, Inc. BIOS ROM checksum error Detecting IDE ATAPI device... 3. BIOS Award BootBlock BIOS v1.0 Copyright (c) 2000, Award Software, Inc. BIOS ROM checksum error Detecting IDE ATAPI device... Found CDROM, try to Boot from it... Fail Detecting floppy drive A media... BIOS 4. BIOS BIOS http://tw.asus.
4.1.6 BIOS ISP 1. 2. VX.XX.XX 3 3. BIOS 1. ASUSUpdate ASUS ASUSUpdate 2. Next 3.
4. BIOS Next 5. BIOS 6.
4.2 BIOS BIOS Basic Input and Output System BIOS BIOS BIOS R U N BIOS SETUP BIOS Flash ROM BIOS BIOS CMOS RAM BIOS Flash ROM BIOS BIOS POST Power-On Self Test DEL RESET Ctrl + Alt + DEL DEL BIOS BIOS BIOS 4.7 Load Setup Defaults BIOS • http://tw.asus.
4.2.1 BIOS System System Legacy Floppy Time Date Diskette A 3 Mode Support Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master IDE Channel 4 Master IDE Channel 5 Master Base Memory Extended Memory Total Memory Select Menu 15 : 30 : 36 Wed, Feb 2 2005 [1.44M, 3.5 in.] [Disabled] Item Specific Help Change the internal clock. [None] [None] [None] [None] [None] [None] [None] [None] 256K 261120K 262144K 4.2.
4.2.3 BIOS or or Exit ← or → (keypad arrow) ↑ or ↓ (keypad arrows) - (minus key) + (plus key) or spacebar or or BIOS 4.2.4 Main Advanced Power Boot 4.2.5 Enter 4.2.
4.2.7 Enter Main Advanced System System Legacy Floppy Phoenix-Award BIOS CMOS Setup Utility Power Boot Exit Time Date Diskette A 3 Mode Support 15 : 30 : 36 Wed, Feb 2 2005 [1.44M, 3.5 in.] [Disabled] Legacy Diskette A: Primary IDE Master [None] Primary IDE Slave[None] Disabled Secondary IDE Master [None] 360K , 5.25 in. Secondary IDE Slave [None] 1.2M , 5.25 in. Third IDE Master720K , 3.5[None] in. Fourth IDE Master[None] 1.44M, 3.5 in. IDE Channel 4 Master 2.88M, 3.5[None] in.
4.3 Main Menu BIOS 4.2.1 BIOS System System Legacy Floppy Time Date Diskette A 3 Mode Support Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master IDE Channel 4 Master IDE Channel 5 Master Base Memory Extended Memory Total Memory Select Menu 15 : 30 : 36 Wed, Feb 2 2005 [1.44M, 3.5 in.] [Disabled] Item Specific Help Change the internal clock. [None] [None] [None] [None] [None] [None] [None] [None] xxxK xxxxxxK xxxxxxK 4.3.
4.3.6 IDE Primary IDE Master BIOS IDE Enter IDE Select Menu Primary IDE Master PIO Mode UDMA Mode [Auto] [Auto] Primary IDE Master Access Mode [Auto] [Auto] Capacity 0 MB Cylinder Head Precomp Landing Zone Sector Transfer Mode S.M.A.R.T Status 0 0 0 0 0 Item Specific Help Set a PIO mode for the IDE device. Mode0 through 4 successive increase in performance. None None Capacity, Cylinder, Head, Precomp, Landing Zone, Sector, and Transfer Mode, and S.M.A.R.
Access Mode [Auto] CHS(cylinder, head, LBA(logical block addressing) 128 extanded CHS mode LBA [Auto] IDE Primary IDE Master [Manual] [CHS] [CHS] [LBA] [Large] [Auto] 528 MB Large sector) GB 528 MB IDE IDE Access Mode Primary IDE Master [Manual] [CHS] Primary IDE Master Select Menu PIO Mode UDMA Mode [Auto] [Auto] Item Specific Help Primary IDE Master Access Mode [Manual] [CHS] Set a PIO mode for the IDE device. Mode0 through 4 successive increase in performance.
Cylinders Cylinder Head Head Precomp Precomp Landing Zone BIOS Capacity Sector Sector Transfer Mode [None] ss S.M.A.R.T Status S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) [None] BIOS FDISK FDISK active 4.3.7 Primary IDE Slave 4.3.6 4.3.8 Secondary IDE Master 4.3.6 4.3.9 Secondary IDE Slave 4.3.
4.3.10 Third IDE Master Extended IDE Drive [Auto] IDE IDE [None] [None] [Auto] Access Mode [Auto] Sector [Large] [Auto] 4.3.11 Fourth IDE Master 4.3.6 4.3.10 4.3.12 IDE Channel 4 Master 4.3.6 4.3.10 4.3.13 IDE Channel 5 Master 4.3.6 4.3.10 4.
4.4.1 CPU Configuration CPU Configuration CPU Internal Cache External Cache CPU Frequency AMD K8 Cool ‘n’ Quiet Control Select Menu [Enabled] [Enabled] [200.0] [Enabled] Item Specific Help Disable/Enable CPU L1/ L2 cache. CPU Internal Cache [Enabled] CPU L1/L2 cache [Disabled] [Enabled] External Cache [Enabled] CPU L3 cache [Disabled] [Enabled] CPU Frequency [200.0] [200.0] [201.0] [202.0].. [400.
4.4.2 Memory Configuration Enter Memory Configuration Timing Mode Memclock Index Value (Mhz) CAS# Latency (Tcl) Min RAS# Active Time (Tras) RAS# to CAS# Delay (Trcd) Row Precharge Time (Trp) Node Memory Interleaving S/W Memory Hole Remapping MTRR Mapping Mode Master ECC Enabled ECC Memory Interlock ECC MCE Enable Chip-Kill Mode Enable ECC Redirection DRAM Background Scrubber L2 Cache Background Scrubber DCache Background Scrubber Select Menu [Auto] [200Mhz] [2.
Node Memory Interleaving [Disabled] memory interleaving [Disabled] [Enabled] S/W Memory Hole Remapping [Enabled] [Disabled] [Enabled] MTRR Mapping Mode [Continuous] [Continuous] [Continuous] [Discreet] [Discreet] Master ECC Enable [Enabled] ECC [Disabled] [Enabled] ECC Memory Interlock [At Least One] ECC [At Least One] [All are] ECC MCE Enable [Disabled] [Disabled] [Enabled] Chip-Kill Mode Enable [Disabled] [Disabled] [Enabled] ECC Redirection [Disabled] [Disabled] [Enabled] DRAM Background Scru
4.4.
Spread Spectrum [Enabled] clock generator spread sectrum [Disabled] [Enabled] SATA Spread Spectrum [Disabled] SATA spread spectrum [Disabled] [Enabled] PCIE Spread Spectrum [Disabled] PCIE spread spectrum [Disabled] [Enabled] SSE/SSE2 Instructions [Enabled] SSE [Disabled] [Enabled] Init Display First [PCI Slot] [PCI Slot] [PCIEx] IDE DMA Transfer Access [Enabled] IDE DMA [Disabled] [Enabled] Serial-ATA 1 [Enabled] SATA1 ( 1 2) [Disabled] [Enabled] SATA DMA Transfer [Enabled] SATA DMA [Disabl
4.4.4 OnBoard Device Enter Onboard Device Speech IC Reporter Report IDE Error Report System Booting Onboard Silicon SATALink Onboard 1394 Onboard Broadcom 5751 LAN Onboard LAN Boot ROM Onboard AC97 Audio NVRAID Configuration Super I/O Device Select Menu [Enabled] [Disabled] [Disabled] [Disabled] [Enabled] [Enabled] [Enabled] [Enabled] Item Specific Help Disable/Enable Speech IC controller.
NVRAID Configuration NVRAID NVRAID Configuration RAID Enable IDE Primary Master IDE Primary Slave IDE Secondary Master IDE Secondary Slave First SATA Master Second SATA Master Third SATA Master Fourth SATA Master RAID RAID RAID RAID RAID RAID RAID RAID Select Menu Item Specific Help [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] Disable/Enable NVIDIA RAID feature.
Super I/O Super I/O Device Serial Port1 Address Onboard Parallel Port Parallel Port Mode EPP Mode Select ECP Mode Use DMA Game Port Address Midi Port Address Midi Port IRQ Select Menu [3F8/IRQ4] [378/IRQ7] [SPP] EPP1.7 3 [201] [330] [10] Item Specific Help Set base I/O address for serial port 1.
Game Port Address [201] GAME [Disabled] [201] MIDI [Disabled] [330] [209] Midi Port Address [330] [300] [290] Midi Port IRQ [10] MIDI IRQ K8N-DL [5] [10] 4-27
4.4.5 PCI PCI PnP PCI/PnP IRQ PCI/PnP DMA Select Menu Memory Configuration Resources Controlled By IRQ Resources [Auto] PCI/VGA Pallete Snoop [Disabled] Item Specific Help BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose Auto, you cannot select IRQ DMA and memory base address fields, since BIOS automatically assigns them.
IRQ Resources Resources Controlled By Manual Memory Configuration Resources Controlled By IRQ Resources [Manual] PCI/VGA Pallete Snoop [Disabled] Select Menu Item Specific Help BIOS can automatically configure all the boot and Plug and Play compatible devices.
4.4.6 USB USB Configuration USB Enter USB Configuration USB Controller USB2.0 Controller USB Legacy Mode Support [Enabled] [Enabled] [Enabled] Select Menu Item Specific Help Enable/Disable USB 2.0 and legay controller. USB Controller [Enabled] USB [Disabled] [Enabled] USB 2.0 Controller [Enabled] USB 2.
4.5 Power menu APM ACPI APIC Support ACPI Suspend Type APM Configuration Hardware Monitor Select Menu [Enabled] [S1&S3] Item Specific Help Enable/Disable ACPI support for Operating System.
4.5.
Power On By PCI Devices [Disabled] [Enabled] 1 PCI +5VSB ATX [Disabled] [Enabled] WOR(RI#) From Soft-Off [Disabled] [Disabled] [Enabled] USB Wake-up From S1/S3 [Disabled] USB [Disabled] [Enabled] Power On By Alarm [Disabled] RTC [Enabled] [Disabled] [Enabled] Day of Month Alarm [Disabled] Enter Enter Month Alarm [Min=0] [Max=31] Day of Time hh:mm:ss Alarm [Disabled] 1. 2. 3. =0 6. 4. 5.
4.5.2 Hardware Monitor Hardware Monitor Voltage Monitor Smart Q-Fan Configuration System Temperature CPU1 Temperature CPU2 Temperature CPU Fan1 speed CPU Fan2 speed Front Fan1 speed Front Fan2 speed Rear Fan1 speed Rear Fan2 speed Select Menu Item Specific Help 39oC/102oF 39oC/102oF 29oC/84 oF 2925 RPM 2925 RPM 0 RPM 0 RPM 0 RPM 0 RPM Press enter to view. Voltage Monitor Voltage Monitor Select Menu CPU VCORE A (V) CPU VCORE B (V) +3.3 Voltage +12V Voltage +1.5V Voltage +2.
CPU1 DDR Voltage CPU2 DDR Voltage DDR [2.60V] [2.70V] [2.80V] [2.90V] Chipset Voltage [1.50V] [1.60V] [1.70V] [1.80V] CPU1 Voltage Control CPU2 Voltage Control CPU [Default VID or plus 100mV] [Default VID] Hyper Transport Voltage Hyper Transport [1.20V] [1.25V] [1. 30V] [1.
Smart Fan Control System Target Temperature [50] [Min=20] [Max=50] CPU1 Target Temperature [55] CPU1 [Min=30] [Max=60] CPU2 Target Temperature [55] CPU2 [Min=30] [Max=60] 4-36 BIOS [Enabled]
4.6 Boot menu Select Menu Boot Device Priority Item Specific Help Hard Disk Boot Priority Removable Device Priority Select Boot Device Priority Boot Settings Configuration Security 4.6.
4.6.2 Hard Disk Boot Priority APM Configuration 1. Bootable Add-in Cards Select Menu Item Specific Help Use or arrow to select a device, the press <+> to move it up, or <-> to move it down the list. Press to exit this menu. 4.6.3 Removable Device Priority APM Configuration 1. Floppy Disks Select Menu Item Specific Help Use or arrow to select a device, the press <+> to move it up, or <-> to move it down the list. Press to exit this menu.
4.6.4 Boot Settings Configuration Boot Settings Configuration Boot Other Device Quick Power On Self Test Halt On Boot Up Floppy Seek Boot Up NumLock Status Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) Select Menu [Enabled] [Enabled] [All, But Keyboard] [Disabled] [On] [Disabled] 6 250 Item Specific Help Select your boot device priority.
Typematic Rate Char/Sec [6] [6] [8] [10] [12] [15] [20] [24] [30] Typematic Delay Msec [250] [250] [500] [750] [1000] 4.6.5 Security Security Supervisor Password User Password Password Check Select Menu Clear Clear [Setup] Item Specific Help Select your boot device priority. Supervisor Password User Password 1. 2. 3.
1. Clear the Password Password Enter PASSWORD DISABLED !!! Press any key to continue... PASSWORD DISABLED !!! Press any key to continue... 2. BIOS Supervisor Password U s e r Password BIOS Supervisor Password User Password CMOS Erasing the BIOS CMOS Real time Clock RAM BIOS CMOS 1.
4.7 BIOS Exit menu BIOS BIOS Select Menu Exit & Save Changes Exit & Discard Changes Load Setup Defaults Discard Changes Item Specific Help This option save data to CMOS and exits the setup menu.
Exit & Discard Changes BIOS Enter BIOS [OK] CMOS [Cancel] BIOS Discard Changes BIOS Enter BIOS [OK] [Cancel] BIOS Load Setup Defaults F5 Enter BIOS [OK] [Cancel] BIOS K8N-DL 4-43
4-44 BIOS
A.1 K8N-DL block diagram ...............................................
2 channel DDR SDRAM 4 x DIMMs AMD Opteron™ CPU2 HT2000MT/S 266/333/400 MHz 266/333/400 MHz 128 bit x16 AMD Opteron™ CPU1 HT2000MT/S directions/s FSB x16 IDE PCI-Express x16 IDE PCI-Express x1 BCM5751 Gigabit LAN 2 channel DDR SDRAM 2 x DIMMs A.1 K8N-DL block diagram 2 x IDE Ports (Ultra ATA 66/100/133) SATA PCIExpress x1 NVIDIA CRUSH K8-04 Professional SATA 4 x Serial ATA SATA Ports SATA 2 x PCI Slots AC97 PCI BUS 33 MHz Audio Codec ALC850 USB2.