IMX8P-IM-A User Manual
E16394 First Edition November 2020 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual..............................................................................................................4 Conventions used in this manual.......................................................................................... 5 Typography................................................................................................................................... 5 Package contents.........................................................................................
About this manual This manual provides information about the hardware and software features of your Single Board Computer, organized through the following chapters: Chapter 1: Specifications Summary This chapter details the hardware and software features of your Single Board Computer. Chapter 2: Product Introduction This chapter describes the features of the motherboard. It includes description of the connectors, and I/O ports on the motherboard.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and prevent damage to your Single Board Computer's data and components.
Package contents Your Single Board Computer package contains the following items: IMX8P-IM-A NOTE: • Some bundled accessories may vary with different models. For details on these accessories, refer to their respective user manuals. • The device illustration is for reference only. Actual product specifications may vary with models.
1 Specifications Summary
IMX8P-IM-A Specifications Summary IMX8P-IM-A Processor Memory Storage CPU NXP® i.MX 8 M ARM Cortex-A53 core Max. Speed 1.3 GHz L2 Cache 1MB Chipset Integrated Technology LPDDR4 Max. 4GB, on board memory eMMC 1 x 16GB onboard eMMC HDMI™ 1xH MDI™ supports HDMI with max. resolution 3840 x 2160 @ 60 Hz MIPI DSI 1xM IPI DSI supports MIPI DSI (2 lane) with max. resolution 1920 x 1080 @ 60 Hz M.2 1xM .
IMX8P-IM-A Internal Connector 1 x 40-pin GPIO header: - up to 6 x GPIO pins - up to 2 x I2C bus pins - up to 1 x UART pins - up to 2 x PWM pins - up to 1 x PCM/I2S pins - 2 x 5V power pins - 2 x 3.3V power pins - 8 x ground pins 1 x Micro-SD card slot 1 x 14-1 pin TPM header 1xM IPI DSI supports MIPI DSI (2 lane) with max.1920 x 1080 @ 60 Hz 2xM IPI CSI support two MIPI-CSI camera inputs (4-lane each) 1 x 5-1 pin I2C header Watchdog Timer (H/W) Yes Security Module TPM TPM 2.
Single Board Computer
2 Product Introduction Chapter 2: Product Introduction
2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. NOTE: The diagrams in this chapter are for reference only. The motherboard layout may vary with models. IMPORTANT! Components shown in this section may require additional purchase. Refer to Package contents section for more information about the contents of your Single Board Computer package.
2.
Layout contents 1. DC-in Power connector 2. GPIO header 3. Boot Mode switch 4. M.2 Wi-Fi slot 5. MIPI CSI connector 6. Micro SD card slot 7. I2C header 8. SPI TPM header 9. RTC Battery connector 10. Reset button 11. MIPI DSI connector 12.
2.3 1. Onboard button and switches Boot Mode switch The Boot Mode switch allows you to configure between different boot modes and the location to boot from. Please refer to the table below for the different boot modes.
2. Reset button Press the Reset button to reboot the system.
2.4 1. Internal connectors DC-in Power connector The DC-in Power connector is for DC power input. Using a compatible power cable, connect the Pico-ITX board to a power supply. Connector type POWER CON 2P R/A Power Requirement Rating Voltage 12 ~ 19VDC Rating Current 5.417A ~ 3.
2. GPIO header This 40-pin GPIO (General-purpose Input/Output) header can be designated (in software) as an input or output pin and is used for a wide range of purposes. Of the 40 pins, 28 are GPIO pins (shared with SPI/UART/I2C pins). Please refer to the tables below for the pin definitions for Linux Yocto and Win 10 IoT Core.
Linux Yocto Pin definition Pin# 3V I2C2_SDA (default) ENET1_1588_EVENT1_OUT GPIO5_IO17 I2C2_SCL (default) ENET1_1588_EVENT1_IN GPIO5_IO16 UART3_TX UART1_RTS_B (default) GPIO5_IO27 Pin# Pin definition 5V 145 3 4 144 5 6 155 7 8 151 9 10 150 121 GND UART3_RX UART1_CTS_B (default) GPIO5_IO26 JTAG_TMS 40P GPIO 1 2 GND UART1_TX (default) ECSPI3_MOSI GPIO5_IO23 UART1_RX (default) ECSPI3_SCLK GPIO5_IO22 SAI2_TX_BCLK (default) SAI5_TX_DATA2 GPIO4_IO25 GND SAI5_RX_DATA1 SAI1_TX_DATA3 SAI1_TX_SYNC
Linux Yocto Pin definition I2C3_SDA (default) PWM3_OUT GPT3_CLK GPIO5_IO19 JTAG_TDO SAI5_RX_DATA3 SAI1_TX_DATA5 SAI1_TX_SYNC SAI5_TX_DATA0 GPIO3_IO24 (default) SAI3_MCLK PWM4_OUT (default) SAI5_MCLK GPIO5_IO02 SAI2_TX_SYNC (default) SAI5_TX_DATA1 GPIO4_IO24 Pin# 40P GPIO Pin# 147 27 28 146 29 30 Pin definition I2C3_SCL(default) PWM4_OUT GPT2_CLK GPIO5_IO18 GND 88 31 32 131 SPDIF1_OUT PWM3_OUT (default) GPIO5_IO03 130 33 34 120 35 36 85 JTAG TDI 37 38 119 GND 39 40 122 GND SAI5
3. M.2 Wi-Fi slot The M.2 Wi-Fi slot allows you to install an M.2 Wi-Fi module (E-key, type 2230). NOTE: The M.2 Wi-Fi module is purchased separately.
4. MIPI CSI connector This connector connects to camera module via a four lane MIPI CSI-2 cable. This connector supports up to 80Mbps connection speed 1.5Gbps per lane, providing 4K@30fps capability for the 4 lanes. IMPORTANT! Ensure the cable for MIPI CSI is connected in the correct orientation with the gold fingers facing towards the top of the motherboard.
5. Micro SD Card slot The Micro SD Card slot allows you to install a Micro SD card. NOTE: The Micro SD card is purchased separately. 6. I2C header The I2C (Inter-Integrated Circuit) connector allows you to connect an I2C compatible IoT security module. Connector type Header 2x3p, K6, 2.
7. SPI TPM header The SPI TPM header supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. Connector type 8. Header 2x7p,K14, 2.0mm pitch RTC Battery connector The RTC Battery connector allows you to connect the lithium CMOS battery.
9. MIPI DSI connector This connector connects to a display module via a four lane MIPI DSI cable. This connector supports up to 1920 x 1080 @ 60 Hz connection speed.
10. IO Board-to-Board connector The IO Board-to-Board connector allows you to connect the Pico-ITX motherboard and secondary I/O board.
2.5 I/O connectors Front panel Front panel connectors Power button The power button allows you to turn the Single Board Computer on or off. You can use the power button to put your Single Board Computer to sleep mode or press it for ten (10) seconds to force shutdown your Single Board Computer. USB 3.2 Gen 1 Type-C® OTG port This USB Type-C® OTG (Universal Serial Bus) port provides a transfer rate of up to 5 Gbit/s, and provides a maximum of 5V/1.5A output.
Front panel connectors Reset button The button allows you to reset the Single Board Computer.
Upgrading your Single Board Computer 3
IMPORTANT! • Ensure that your hands are dry before proceeding with the rest of the installation process. Before installing any of the features in this guide, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static electricity. • Turn off the power of your Single Board Computer, and allow it to cool for at least 10 minutes before performing any installation/ uninstallation process. NOTE: The illustrations in this section are for reference only.
3.2 Installing the wireless card 1. Remove the M.2 stand screw. 2. Align and insert the wireless card into its slot on the motherboard, then gently push down the wireless card on top of the screw hole and fasten it using the previously removed stand screw. 3. (optional) Connect the antennas to your wireless card. NOTE: • Connecting antennas to your wireless card may strengthen the wireless signal. • A soft clicking sound indicates that the antenna has been securely attached on the wireless card.
Single Board Computer
Appendix
Safety information Your Edge Computer is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • • • • 34 Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface.
Care during use • Do not walk on the power cord or allow anything to rest on it. • • Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug the power cord from the power outlets before cleaning the system. If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. – The power cord or plug is damaged.
Regulatory notices COATING NOTICE IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules.
RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
VCCI: Japan Compliance Statement Class A ITE Japan RF Equipment Statement 屋外での使用について 本製品は、5GHz帯域での通信に対応しています。電波法の定めにより 5.2GHz、5.3GHz帯域の電波は屋外で使 用が禁じられています。 法律および規制遵守 本製品は電波法及びこれに基づく命令の定めるところに従い使用してくだ さい。日本国外では、その国の法律ま たは規制により、本製品の使用ができないことがあります。 このような国で は、本製品を運用した結果、罰せられ ることがありますが、当社は一切責任を負いかねますのでご了承ください。 HDMI Compliance Statement The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Declaration of compliance for product environmental regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/Compliance.
Turkey RoHS AEEE Yönetmeliğine Uygundur ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http:// csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Manufacturer Authorised representative in Europe 42 ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 1F., No. 15, Lide Rd., Beitou Dist.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 https://www.asus.com Technical Support Telephone +86-21-38429911 Fax +86-21-5866-8722, ext. 9101# Online support https://www.asus.
Single Board Computer
