E15440 First Edition / April 2019 User Guide
First Edition/ April 2019 ASUS Phone (Mobile Phone) Model: A SUS_I001D / ASUS_I001DC (ZS660KL) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the complete E-Manual and more detailed information, refer to https://www.asus.com/support/.
Side & Rear features Microphone Bumper RGB LED Rear cameras Camera flash Air Trigger touch sensor 802.11ad antenna area NFC detection area Volume key Side Mount connector Power key Microphone Nano SIM card tray eject hole Nano SIM card slot Rear cover Aura light Air Trigger touch sensor Microphone Microphone USB Type-C port Audio jack NOTES: • The USB Type-C port supports USB 2.0 transfer rate. The Side Mount connector Type-C port supports USB 3.1 Gen1 transfer rate.
AeroActive Cooler features Use the AeroActive Cooler to keep your ROG Phone working at a high frequency during heavy workloads by providing a better thermal solution, and offering the ultimate user experience. Fan Aura light Side mount connector cover storage USB Type-C port Audio jack NOTES: • Connect your AeroActive Cooler to the Side Mount connector of your ROG Phone.
NOTES: • It is not recommended that you connect other devices to your ROG Phone when you install the phone on the AeroActive Cooler. • Docking your ROG Phone on an accessory with fan(s) will impact the audio quality when making phone calls and recording. Charging your ROG Phone To charge your ROG Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the USB Type-C cable to your ROG Phone. 3. Plug the power adapter into a wall socket.
IMPORTANT! • When using your ROG Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. • When charging your ROG Phone through your computer, ensure that you plug the USB Type-C cable to your computer’s USB port. • DO NOT charge your ROG phone underwater or when the USB connector is wet. • Avoid charging your ROG Phone in an environment with ambient temperature of above 35 °C (95 °F).
NOTES: • Both Nano SIM card slots support GSM/GPRS/ EDGE, WCDMA/HSPA+/DC-HSPA+, FDD-LTE, and TD-LTE DSDV network bands. Both Nano SIM cards can connect to VoLTE 4G calling service. But only one can connect to FDD-LTE, and TD-LTE data service at a time. • Contact your telecom carrier if DSDV support is available in your area. CAUTION! • Do not use sharp tools or solvent on your device to avoid scratches on it. • Use only a standard Nano SIM card on your ROG Phone.
Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit.
to hear conversations on the phone when using the hearing aid microphone, and a “T” rating that enables the phone to be used with hearing aids operating in the telecoil mode thus reducing unwanted background noise. The Hearing Aid Compatibility rating is displayed on the wireless phone box. A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an “M3” or “M4” rating.
Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch. do?lang=eng. Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/ smt-gst.nsf/eng/sf08792.html. This equipment should be installed and operated with minimum distance 15 mm between the radiator and your body.
Using GPS (Global Positioning System) on your ROG Phone To use the GPS positioning feature on your ROG Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. • When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.
• • Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment. Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point. • Do not touch the battery terminals. • To avoid fire or burns, do not disassemble, bend, crush, or puncture the battery. NOTES: • Risk of explosion if battery is replaced by an incorrect type. • Dispose of used battery according to the instructions.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
ASUS Address: 4F, 150 Li-Te Rd., Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ROG Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
15060-xxxxxxxx