HA2402 Series LCD Monitor User Guide KEY
First Edition February 2014 Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................... iii Notices.......................................................................................................... iv Safety information........................................................................................ v Intended use of the system....................................................................... vii Maintenance................................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• This system comply with following EMC/EMI standards: EN 60601-1-2:2007+AC:2010: Electromagnetic Compatibility Emission: CISPR 11:2009+A1:2010, Class B AS/NZS CISPR 11:2011 EN 61000-3-2:2006+A1:2009+A2:2009 and EN 61000-3-3:2008 Immunity: IEC 61000-4-2:2008, IEC 61000-4-3:2010, IEC 61000-4-4:2012, IEC 61000-4-5:2005, IEC 61000-4-6:2008, IEC 61000-4-8:2009, IEC 61000-4-11:2004 • If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products. Intended use of the system The intended use of the model is to serve as an LCD monitor for integration with the hospital system. It is designed for general purpose for hospital environment. For displaying and viewing of images for reference.
Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to find more information Refer to the following sources for additional information and for product and software updates. 1.
Contact Information • • ASUSTeK Computer Inc. Address 15 Li-Te Rd,. Peitou, Telephone Taipei 11259, Taiwan +886-2-2894-3447 Fax +886-2-2894-7798 E-mail info@asus.com.tw Website http://www.asus.com.tw/ ASUSTeK Computer Inc. Address 800 Corporate Way, Fax Website • • Technical Support Telephone +886-2-3842-9911 • Technical Support Telephone +1-812-282-2787 (English Only) Fremont, CA 94539, USA +1-150-608-4555 http://usa.asus.com/ ASUSTeK Computer Inc. Address Harkortstr.
x
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view 1 2 KEY 3 4 5 KEY 6 7 1. 2. 3. 5-way button: • Enacts the selected OSD menu item. • Increases/Decreases values or moves your selection up/down/left/right. MENU button: • Turns on the OSD menu. • Exits the OSD menu or goes back to the previous menu when the OSD menu is active. KE Y • 4. Toggles the Key Lock function between on and off with a long press of 5 seconds. button: • 1-2 button: Brightness hotkey.
5. button: • Selects a desired preset mode. • Automatically adjusts the image to its optimized position, clock, and phase by pressing this button for 2-4 seconds (for VGA mode only). 6. button: • Selects an available input source. button (Input Select button) to display HDMI/DisplayPort signals after you connect HDMI/DisplayPort cable with the monitor. Press 7. Power button/power indicator • Turns the monitor on/off. • The color definition of the power indicator is as the below table. 1.3.
5. DVI port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal connection. 6. VGA port. This 15-pin port is for PC VGA connection. 7. Earphone jack. 8. USB 3.0 upstream port. This port is for connection with a USB upstream cable. The connection enables the USB ports on the monitor. 9. Kensington lock slot. 10. USB 3.0 downstream ports. These ports are for connection with USB devices, such as USB keyboard/mouse, USB flash drive, etc.
ASUS HA2402 Series LCD Monitor 1-5
1-6 Chapter 1: Product introduction
2.1 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Use a screwdriver to remove the four screws on the arm (Figure 1), and then detach the arm/base from the monitor (Figure 2). (Figure 1) (Figure 2) We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from +20˚ to -5˚, and it allows 60˚ swivel adjustment from either left or right. You can also adjust the monitor’s height within +/- 10 cm.
2.3 Connecting the cables Connect the cables as the following instructions: • To connect the power cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. • To connect the VGA/HDMI/DVI/DisplayPort cable: a. Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s VGA/HDMI/DVI/DisplayPort jack. b. Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your computer's VGA/HDMI/DVI/DisplayPort jack. c.
2-4 Chapter 2: Setup
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. 2. Move the button up/down to navigate through the functions. Highlight the desired function and press the button to activate it. If the function selected has a sub-menu, move the button up/down to navigate through the submenu functions. Highlight the desired sub-menu function and press the button to activate it. 3. Move the 4.
Function Brightness Contrast Saturation Color Temperature Gamma 2. Yes Yes Yes Yes No No No No Yes No No No No Yes No No No No Yes No No No No Yes No Color Set a desired color setting from this menu. • Brightness: the adjusting range is from 0 to 100. • Contrast: the adjusting range is from 0 to 100. • Saturation: the adjusting range is from 0 to 100. • Color Temp.: contains 4 modes including 9300K, 8200K, 7500K and 6500K.
3. Image Set the image related setting from this menu. • Sharpness: the adjusting range is from 0 to 100. • Trace Free: adjusts the response time of the monitor. • Aspect Control: adjusts the aspect ratio to full, 4:3, 1:1, or OverScan (only available for the HDMI input). • Position: adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100.
5. System Setup Allows you to adjust the system. • * Adjusts the horizontal position (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100. * Adjusts the OSD timeout from 10 to 120 seconds. * Enables or disables the DDC/CI function. * Adjusts the OSD background from opaque to transparent. * Adjusts the OSD rotation. • Information: shows the monitor information.
3.2 Specifications summary Panel Type Panel size Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Viewing angle (H/V) CR>10 Display colors Response time SPLENDID™ Video Enhancement SPLENDID™ selection Auto adjustment Color temperature selection Digital input Analog input Earphone jack USB 3.0 port Colors Power LED Tilt Swivel Height Adjustment Kensington lock AC input voltage Power consumption Temperature (Operating) TFT LCD 24.1" (16:10, 61.13 cm) wide screen 1920 x 1200 0.
3.3 Troubleshooting (FAQ) Problem Power LED is not ON The power LED lights amber and there is no screen image Screen image is too light or dark Possible Solution • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check if the power switch is ON. • Check if the monitor and the computer are in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer.
3.4 Supported operating modes Resolution Frequency Horizontal Frequency (KHz) Vertical Frequency . Pixel . (Hz) (MHz) 640x480 800x600 800x600 1024x768 1280x960 1280x1024 1366x768 1440x900 1600x1200 1680x1050 31.47(N) 35.16(P) 37.88(P) 48.36(N) 60.00(P) 63.98(P) 47.712(P) 55.94(N) 75.00(P) 65.29(N) 59.94(N) 56.25(P) 60.32(P) 60.00(N) 60.00(N) 60.02(P) 59.79(P) 59.89(P) 60.00(P) 60.00(P) 25.18 36 40 65 108 108 85.5 106.5 162 146.25 1920x1080 1920x1200 (Reduced Blanking) 67.5(P) 60.00(P) 148.5 74.
3-8 Chapter 3: OSD (On-Screen Display) menu
