Industrial Motherboard H310I-IM-A R3.
E20015 First Edition March 2022 Copyright © 2022 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Chapter 1 1.1 Product overview Package contents.......................................................................... 1-1 1.2 Features......................................................................................... 1-1 1.3 Specifications................................................................................ 1-2 Chapter 2 Motherboard information 2.1 Before you proceed...................................................................... 2-1 2.2 Motherboard layout...
3.3.13 NVMe Configuration....................................................... 3-11 3.3.14 APM Configuration......................................................... 3-12 3.3.15 EZ-Flash........................................................................ 3-12 3.3.16 Watchdog Timer............................................................. 3-12 3.3.17 Miscellaneous................................................................ 3-12 3.4 Hardware Monitor menu................................
Chapter 1 Product overview 1.1 Package contents Check your industrial motherboard package for the following items. 1 x ASUS H310I-IM-A R3.0 Motherboard 2 x Serial ATA 6.0 Gb/s cables 2 x M.2 screw packages 1 x ASUS I/O Shield NOTE: If any of the above items is damaged or missing, contact your distributor or sales representative immediately. 1.2 Features • Intel socket 1151 for 9th/8th Gen Intel® Core™ i7/ i5/ i3, Pentium®, and Celeron® processors supports 14nm CPU, Max.
1.3 Specifications CPU Intel® socket 1151 for 9th/8th Gen Intel® Core™ i7/ i5/ i3, Pentium®, and Celeron® processors, Max.65 TDP Supports Intel® 14nm CPU * Refer to www.asus.com for Intel® CPU support list. Chipset Memory Intel® H310 Chipset 2 x SO-DIMM, max.32GB, DDR4 2666/2400/2133 MHz * Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
2 x USB 2.0 2-port connectors support additional 4 USB 2.0 ports 1 x USB 3.2 Gen 1 2-port connector supports additional 2 USB 3.2 Gen 1 ports 2 x SATA 6.0Gb/s connectors 1 x M.2 Socket 1 (Key E, 2230) for WIFI/BT device 1 x M.
Windows® 10 (64-bit) Win10 IoT Enterprise OS support Ubuntu RedHat Enterprise Fedora Workstation Form Factor OpenSUSE Mini-ITX Form Factor, 6.7”x 6.7” (17.0cm x 17.0cm) NOTE: Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications. 1-4 H310I-IM-A R3.
Chapter 2 Motherboard information 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. CAUTION! • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
2.2 Motherboard layout NOTE: Place four screws into the holes indicated by circles to secure the motherboard to the chassis. CAUTION! Do not overtighten the screws! Doing so can damage the motherboard. 1 2 3 4 5 6 7 8 17.0cm(6.
Connectors/Jumpers/Slots 1. COM1 Ring/+5V/+12V selection jumpers (6-pin COM1_ESL, COM2_ESL) 2. LCD panel monitor switch header (2-pin PANEL_SW) 3. USB 3.2 Gen 1 connector (20-1 pin U32G1_12) 4. USB 2.0 connectors (10-pin USB56, USB78) 5. General purpose input/output connector (GPIO_CON) 6. Serial port connectors (10-1 pin COM3, COM4, COM5, COM6) 7. TPM connector (14-1 pin TPM) 8. Display panel backlight power selection (3-pin BLKT_PWR_SEL) 9. LVDS connector (40-pin LVDS) 10. DDR4 SO-DIMM slots 11.
2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1151 socket designed for the Intel® 9th/8th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium®, and Celeron® processors. LGA1151 IMPORTANT! Unplug all power cables before installing the CPU. CAUTION! 2-4 • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent.
2.3.1 CPU installation 1 A B 2 3 CAUTION! LGA1156 CPU is not compatible with the LGA1151 socket. DO NOT install an LGA1156 CPU on the LGA1151 socket.
4 C A B 5 2-6 H310I-IM-A R3.
2.3.2 CPU heatsink and fan assembly installation CAUTION! Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
To uninstall the CPU heatsink and fan assembly 1 2 A B B A 2-8 H310I-IM-A R3.
2.4 System memory This motherboard comes with two Double Data Rate 4 (DDR4) Small Outline Dual Inline Memory Module (SO-DIMM) sockets.
2.5 1. Jumpers Clear RTC RAM (2-pin CLRTC) This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. CLRTC +3V_BAT_RTC GND PIN 1 To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to re-enter data.
3. COM1/2 Ring/+5V/+12V selection (6-pin COM1_SEL, COM2_SEL) A COM1_SEL COM2_SEL A B B 4.
5. AT/ATX mode selection (3-pin AT_ATX_SEL) AT_ATX_SEL 1 2 ATX mode (Default) 2 3 AT mode Pins 1-2 (Default) ATX mode 2-3 AT mode 2.6 Connectors 2.6.1 Rear panel connectors 1 1 2-12 2 5 3 4 6 7 1. Serial ports (COM). These ports connect a modem, and other devices that conform with serial specification. 2. DisplayPorts. These ports are for DisplayPort-compatible devices. H310I-IM-A R3.
3. LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Area Network (LAN) through a network hub. LAN port LED indications Activity/Link LED Status Off Orange Orange (Blinking) Orange (Blinking then steady) Description No link Linked Data activity Ready to wake up from S5 mode Speed LED Status Description OFF 10Mbps connection ORANGE 100Mbps connection GREEN 1Gbps connection Activity Link LED Speed LED LAN port 4. Line Out port (lime). This port connects to a headphone or a speaker.
7. Microphone port (pink). This port connects to a microphone. Refer to the audio configuration table for the function of the audio ports in 2, 4, 5.1, or 7.1-channel configuration. Audio 2, 4, 5.1 or 7.1-channel configuration Line Ourt (Rear panel) Headset 2-channel Front Speaker Out MIC(Rear panel) MIC Headphone (Front panel) Headphone MIC (Front panel) MIC Port 4-channel Front Speaker Out Rear Speaker Out 5.1-channel 7.
2.6.2 1. Internal connectors LCD panel monitor switch header (2-pin PANEL_SW) This 2-pin header is for connecting a monitor switch that can turn off the LCD panel display backlight. PANEL_SW GND MON_SW# PIN 1 2. USB 3.2 Gen 1 connector (20-1 pin U32G1_12) USB3+5V IntA_P1_SSRXIntA_P1_SSRX+ GND IntA_P1_SSTXIntA_P1_SSTX+ GND IntA_P1_DIntA_P1_D+ GND Connect a USB 3.2 Gen 1 module to this connector for additional USB 3.2 Gen 1 front or rear panel ports. This connector complies with USB 3.
3. USB 2.0 connectors (10-pin USB56, USB78) USB+5V USB_P7USB_P7+ GND NC These connectors are for USB 2.0 ports. Connect the USB cable to these connectors. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. A A B USB78 USB+5V USB_P5USB_P5+ GND NC USB+5V USB_P8USB_P8+ GND PIN 1 B USB78 USB+5V USB_P6USB_P6+ GND PIN 1 CAUTION! Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard.
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. A B CHA_FAN CPU_FAN PIN 1 CHA FAN PWM CHA FAN IN CHA FAN PWR GND A CPU FAN PWM CPU FAN IN CPU FAN PWR GND PIN 1 B CAUTION! Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components.
7. Front panel system panel connector (10-1 pin F_PANEL) F_PANEL (NC) RSTCON#_PANEL GND HDD_LEDHDD_LED+ GND PWRBTN# PWR_LEDPWR_LED+ PIN 1 +HDD_LED RESET +PWR LED PWR BTN This connector supports several chassis-mounted functions. • System power LED (2-pin +PWR_LED) • This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
9. LVDS connector (40-pin LVDS) This connector is for an LCD monitor that supports Low Voltage Differential Signalling (LVDS) interface.
GND S_CNV_WT_CLK_P S_CNV_WT_CLK_N GND S_CNV_WT_D0_P S_CNV_WT_D0_N GND S_CNV_WT_D1_P S_CNV_WT_D1_N GND S_WAKE#_WIFI CK_REQ_M2_WLAN#_R GND CK_WIFI_CLKN CK_WIFI_CLKP GND S_WIFI_RXN S_WIFI_RXP GND S_WIFI_TXN_C S_WIFI_TXP_C GND Key Key Key Key S_CNV_WR_CLK_P S_CNV_WR_CLK_N GND S_CNV_WR_D0_P S_CNV_WR_D0_N GND S_CNV_WR_D1_P S_CNV_WR_D1_N GND S_USB_PN10_CN S_USB_PP10_CN GND +3VSB_WIFI +3VSB_WIFI NC NC NC CNV_CLKIN_XTAL_R NC NC NC S_WIFI_DISABLE_N S_BT_DISABLE_N S_PLTRST# S_SUSCLK_R MFUART2_RXD_R MFUART2_TXD_R CNVI_
13. mSATA/mPCIe combo slot (MSATA_MPCIE) GND5 SMB_CLK PETn0 SMB_DATA PETp0 GND10 GND6 USB_DGND USB_D+ 3.3V GND11 3.3V NC mPCIE_mSATA_SW NC Reserved7 NC Reserved8 1.5V_3 Reserved9 GND12 mSATA_Present 3.3V_2 GND13 GND14 NP_NC1 NP_NC2 This slot allows you to install a full/half length mSATA or mini-PCIe card, providing you with expandability and connectivity solutions for an optimal system performance. MSATA_MPCIE WAKE# 3.3V_1 Reserved1 GND7 Reserved2 1.
15. Serial port connectors (10-pin COM3, COM4, COM5, COM6) These connectors are for serial (COM) modules. Connect the serial port cables to these connectors, then install the module to a slot opening at the back of the system chassis. PIN 1 DCD# TXD GND RTS# Ring RXD DTR# DSR# CTS# (NC) COM6、COM5、COM4、COM3 H310I-IM-A R2.0 Serial port (COM) connectors NOTE: The serial port cables are purchased separately. 16.
17. Front panel audio connector (10-1 pin AAFP) NC AGND NC NC SENSE2_RETUR AGND NC SENSE1_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP HD-audio-compliant pin definition MIC2 MICPWR Line out_R NC Line out_L PIN 1 PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L PIN 1 Legacy AC’97 compliant definition H310I-IM-A R2.
2.7 1. Slot PCI Express slot This slot supports a PCIe x16 graphics card that complies with the PCI Express specification. PCIEX16 2-24 H310I-IM-A R3.
Chapter 3 BIOS setup Scan the QR code to view the BIOS update guide. 3.1 BIOS Setup program Use the BIOS Setup program to configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: Press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines.
BIOS menu screen The menu bar on top of the screen has the following main items: Main For changing the basic system configuration. Advanced For changing the advanced system settings. Hardware Monitor For displaying the system temperatures, fan and power status, and changing smart fan settings. Security For configuring the system security settings. Boot For changing the system boot configuration. Exit For selecting the save options and default options.
All-in-One Chassis Allows you to select All-in-One (AiO) Chassis (if applicable) for simplified AiO configuration. Configuration options: [None] [1920*1080 LVDS1] [1920*1080 LVDS2] [1920*1080 LVDS3] [1600*900 LVDS4] • Be cautious when selecting AiO chassis. Incorrect selection of AiO chassis can cause incorrect operation or potential damage to AiO chassis hardware. • The following items appear only when you set All-in-One Chassis to [None].
BL_EN disable to VARY_BL disable (T10) Configuration options: [0] ~[1023] 3.3.2 PCH-FW Configuration This item allows you to configure Management Engine Technology parameters. TPM Device Selection Allows you to select TPM device. [PTT] Enables PTT in SkuMgr. [dTPM] Disables PTT in SkuMgr. When PTT is disabled, all data saved on it will be lost. 3.3.3 Trusted Computing Security Device Support Allows you to enable or disable BIOS support for security device.
Some HCK tests might not support 1.3. 3.3.4 CPU Configuration The items in this menu show CPU-related information the BIOS automatically detects. Intel (VMX) Virtualization Technology This item, when set to [enabled], will allow a VMM to utilize the additional hardware capacities provided by Vanderpool Technology.
Primary Display Allows you to select which of the IGFX/PEG/PCI Graphics devices should be the primary display or select SG for switchable Gfx. Configuration options: [Auto] [IGFX] [PEG] Internal Graphics Configuration options: [Auto] [Disabled] [Enabled] [Auto] Keeps IGFX enabled base on the setup options. [Disabled] Disables internal graphics. [Enabled] Enables internal graphics. RC6 (Render Standby) Allows you to enable or disable render standby support.
Serial Port Allows you to enable or disable the serial port (COM). Configuration options: [Disabled] [Enabled] COM1 Control Allows you to select COM1 mode. Configuration options: [RS232] [RS422] [RS485] Serial Port 2 Configuration This item allows you to set parameters of Serial Port 2 (COMB). Serial Port Allows you to enable or disable the serial port (COM). Configuration options: [Disabled] [Enabled] COM2 Control Allows you to select COM2 mode.
Configuration options: [Enabled] [Disabled] The following item is accessible when you set Console Redirection to [Enabled]. Console Redirection Settings The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. Terminal Type Configuration options: [VT100] [VT100Plus] [VT-UTF8] [ANSI] [VT100] ASCII char set. [VT100Plus] Extends VT100 to support color, function keys, etc.
Configuration options: [None] [Hardware RTS/CTS] VT-UTF8 Combo Key Support Allows you to enable or disable VT-UTF8 Combination Key Support for ANSI/ VT100 terminals. Configuration options: [Disabled] [Enabled] Recorder Mode With this mode enabled only text will be sent. This is to capture Terminal data. Configuration options: [Disabled] [Enabled] Resolution 100x31 Allows you to enable or disable extended terminal resolution.
3.3.11 USB Configuration Legacy USB Support [Enabled] Enables the support for USB devices on legacy OS. [Disabled] USB devices are only available when running BIOS Setup. [Auto] Allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. XHCI Hand-off This item functions as a workaround for OSes without XHCI hand-off support.
3.3.12 Onboard Devices Configuration Audio Controller Allows you to control detection of the HD-Audio device. Configuration options: [Enabled] [Disabled] [Enabled] Enables the HD Audio Device unconditionally. [Disabled] Disables the HD Audio Device unconditionally. Intel LAN1 Controller [Enabled] Enables the Intel LAN controller 1. [Disabled] Disables the controller.
3.3.14 APM Configuration ErP Ready Allows BIOS to switch off some power at S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options will be switched off. Configuration options: [Enable] [Disabled] Restore AC Power Loss Allows you to select AC power state when power is re-applied after a power failure.
DMI Link ASPM Control Allows you to disable or control Active State Power Management on SA side of the DMI link. Configuration options: [Disabled] [L0s] [L1] [L0sL1][Auto] 3.3.18 Network Stack Configuration Network Stack This item allows user to disable or enable the UEFI network stack. Configuration options: [Disabled] [Enabled] The following two items appear only when you set the previous item to [Enabled]. Ipv4 PXE Support This item allows user to disable or enable the Ipv4 PXE Boot support.
Chassis Fan Setting Temperature 1(~4) Allows you to set the value of temperature1(~4). FD/RPM 1(~4) Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is T1(~4). CPU Fan Setting Temperature 1(~4) Allows you to set the value of temperature1(~4). FD/RPM 1(~4) Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is T1(~4). 3.5 Security menu The Security menu allows a new password to be created or a current password to be changed.
To set a user password: 1. Select the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change a user password: 1. Select the User Password item and press . 2. From the Enter Current Password box, key in the current password, then press . 3. From the Create New Password box, key in a new password, then press . 4. Confirm the password when prompted. 3.5.
Fast Boot Allows you to enable or disable boot with initialization of a minimal set of devices required to launch active boot option. This has no effect for BBS boot options. Configuration options: [Disabled] [Enabled] Boot mode select Configuration options: [UEFI] [LEGACY] FIXED BOOT ORDER Priorities Boot Option #1(~5) Allows you to set the system boot order. Configuration options: [Hard Disk] [NVME] [CD/DVD] [USB Device] [Network] [Disabled] 3.
Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Google™ License Terms Copyright© 2022 Google Inc. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste.
Service and Support Visit our multi-language website at https://www.asus.com/support/ Manufacturer ASUSTek COMPUTER INC. Address, City 1F., No. 15, Lide Rd., Beitou Dist.