Q2021 ® GPS-BT100 GPS Receiver with Bluetooth® Quick Start Guide Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.
ASUS GPS-BT100 specifications summary English Chipset SiRF Star Ile/LP Channels 12 parallel satellite-tracking channels Frequency 1575.42 MHz Receiver L1, C/A code Average Acquisition Time Reacquisition Update rate Snap Start Hot start Warm start Cold start Receiver accuracy Normal : 5 ~ 25 meters CEP without SA EGNOS/WAAS : <2.2 meters, horizontal 95% of time <5 meters, vertical 95% of time Velocity : within 0.
Welcome! English Thank you for choosing the ASUS GPS-BT100! The ASUS GPS-BT100 is a Global Positioning System (GPS) receiver with Bluetooth® wireless technology that provides accurate location information through your ASUS Personal Digital Assistant (PDA), notebook, or desktop computer. With the latest in GPS technology, the ASUS GPS-BT100 is a dependable mobile companion anytime, anywhere you are.
Features English • Enhanced navigation performance in urban, canyon, and foliage environments • Wide range of use including land/marine navigation, fleet management, personal navigation, tracking system, and mapping • High-speed signal acquisition (1920 time/frequency search channels) • Bluetooth Serial Port Profile (SPP)-compatible for easy integration with your PDA or notebook with Bluetooth capability • Mini-USB port for devices with no Bluetooth capability (using the optional mini-USB port to
LED indicators LED Color Bluetooth Blue GPS signal Green Power Status English The device has three light-emitting diode (LED) indicators. Refer to the table below for the LED indications. Description On The device is waiting for connection to another Bluetooth device ( e.g.
Installing the device English With the supplied accessories, you can install, charge, and use the device in your vehicle to get your GPS information while on the road. To use and charge the device inside your car: 1. 2. 3. 4. 5. 6. 7. 8. 9. Insert the windshield holder foot to the hole at the back of the device until it fits in place. Position the device on the car windshield or window with its top panel facing out. Refer to the illustration below.
English Getting GPS information Step 1: Install the device inside your vehicle following the instructions in the previous section. I M P O R T A N T ! Do not leave the device under the sun or inside a warm compartment for a long period of time. High temperatures may damage the device battery or affect its performance. Step 2: Turn on the device. Step 3: Turn on the PDA Bluetooth function. To turn on the PDA Bluetooth function: 1.
English 5. Tap S P P s l a v e from the S e r v i c e s e l e c t i o n field, then tap N e x tt. 6. The PDA automatically creates a shortcut for the device. Tap Finish h. Tap and hold the GPS-BT100: SPP slave icon, then select Connect from the pop-up menu. 8. The PDA connects to the device. Tap (X) to close the B l u e t o o t h M a n a g e r window. 7. I M P O R T A N T ! When prompted, enter the default Bluetooth passkey (1234) using the onscreen keyboard.
Problem T h e ““Search Search GPS automatically” feature of m y n a v i g a t i o n application cannot detect the ASUS GPS-BT100 or t h e navigation application fails to receive GPS data. English Troubleshooting Solution • Check if another device or application is using the virtual COM port which the ASUS GPS-BT100 is trying to use. Turn off the device or application that uses the same virtual COM port as that of the ASUS GPS-BT100.
Troubleshooting English Problem Solution The GPS signal LED turns off after a period of time e.. When the ASUS GPS-BT100 is not connected to another device (e.g. PDA), the GPS function automatically turns off to save power. The GPS function is automatically restored when another device connects to the ASUS GPS-BT100. The Bluetooth LED turns The ASUS GPS-BT100 is in idle mode. Turn off, o f f a f t e r a p e r i o d o f t i m e . then turn on the device to activate the Bluetooth function.
