Motherboard ROG STRIX X570-E GAMING
E15826 Revised Edition v2 August 2019 Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information........................................................................................................ v About this guide.......................................................................................................... vi ROG STRIX X570-E GAMING specifications summary.......................................... viii Package contents....................................................................................................... xii Installation tools and components.
3.2.3 Q-Fan Control.............................................................................. 3-7 3.2.4 EZ Tuning Wizard........................................................................ 3-9 3.3 My Favorites.............................................................................................. 3-10 3.4 Main menu................................................................................................. 3-12 3.5 Ai Tweaker menu...................................................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
ROG STRIX X570-E GAMING specifications summary CPU AMD AM4 Socket for 3rd and 2nd Gen AMD RyzenTM/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors Chipset AMD X570 Chipset ** Refer to www.asus.com for the AMD CPU support list. 3rd Gen AMD Ryzen™ Processors - 4 x DIMM, max.128GB,DDR4 4400(O.C.)/4266(O.C.)/4133(O.C.)/400 0(O.C.)/3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3400(O.C.)/3 200(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.
ROG STRIX X570-E GAMING specifications summary 3rd Gen AMD Ryzen™ Processors - 1 x M.2 Socket 3 with M Key, Type 2242/2260/2280/22110 storage devices support (PCIE 4.0 x 4 and SATA modes) 2nd Gen AMD Ryzen™/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors Storage - 1 x M.2 Socket 3 with M Key, Type 2242/2260/2280/22110 storage devices support (PCIE 3.0 x 4 and SATA modes) AMD X570 Chipset: - 1 x M.2 socket 3 with M Key, Type 2242/2260/2280/22110 (PCIE 4.
ROG STRIX X570-E GAMING specifications summary 3rd Gen AMD RyzenTM Processors - 4 x USB 3.2 Gen2 ports (4 ports at back panel, Type-A) 2nd Gen AMD RyzenTM/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors USB - 4 x USB 3.2 Gen1 ports (4 ports at back panel, Type-A) AMD X570 chipset - 1 x USB 3.2 Gen2 front panel connector - 4 x USB3.2 Gen2 (at back panel, 3x Type-A,1 x Type-C) - 2 x USB3.2 Gen1 ports (at front panel) - 4 x USB 2.
ROG STRIX X570-E GAMING specifications summary Gamer’s Guardian - DRAM Overcurrent Protection - ESD Guards on LAN, Audio, KBMS and USB ports Special Features - Highly Durable Components - SafeSlot - Procool - DIGI+ VRM 1 x HDMI port 1 x DisplayPort 1 x BIOS FlashbackTM button 1 x BIOS FlashbackTM LED Back I/O Ports 8 x USB 3.2 Gen2 ports (7 x Type-A, 1 x Type-C ) 1 x Anti-surge 2.
ROG STRIX X570-E GAMING specifications summary BIOS 256 Mb Flash ROM, UEFI AMI BIOS, PnP, WfM2.0, SM BIOS 3.2, ACPI 6.2 Manageability WOL, PXE Overwolf Support DVD contents ASUS Utilities WinRAR Anti-virus software (OEM version) Operating System Support Windows® 10 64-bit Form Factor ATX Form Factor, 12”x 9.6” (30.5 cm x 24.4 cm) Specifications are subject to change without notice. Package contents Check your motherboard package for the following items.
Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit AMD AM4 CPU AMD AM4/AM3 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
xiv
Product Introduction Product Introduction 1.1 Motherboard overview 1.1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.1.2 Motherboard layout 1 2 3 24.4cm(9.6in) 4 2 6 5 Chapter 1 RGB_HEADER1 AIO_PUMP EATX12V_2 HDMI_DP CPU_FAN CPU_OPT 26 BOOT DIGI +VRM VGA CPU DRAM BIOS_FLBK 7 24 STRIX X570-e GAMING RTL 8125-CG 22110 20 2280 2260 2242 ADD_GEN2_1 1 U32G2_C9 SPI_TPM M.2_1(SOCKET3) AUDIO CHA_FAN1 LED1_CON M.2(WIFI) 8 30.
Layout contents 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. CPU, CPU optional, and chassis fan connectors; water pump+, M.2 fan, and AIO pump connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN12; 4-pin W_PUMP+, 4-pin M.2_FAN, 4-pin AIO_PUMP) SPI TPM connector (14-1 pin SPI_TPM) AM4 CPU socket AURA RGB headers (4-pin RGB_HEADER1/2) DDR4 DIMM slots Q LEDs (DRAM, CPU, VGA, BOOT) Addressable RGB header (4-1 pin ADD_GEN2_1/2) USB 3.2 Gen 2 front panel connector (U32G2_C9) M.
1.1.3 Central Processing Unit (CPU) The motherboard comes with an AM4 socket designed for AMD AM4 Socket for 3rd and 2nd Gen AMD RyzenTM/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors. Chapter 1 STRIX X570-e GAMING ROG STRIX X570-E GAMING CPU socket AM4 The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
Chapter 1 Recommended memory configurations Memory configurations You may install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered DDR4 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
1.1.5 Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. STRIX X570-e GAMING PCIEX16_1 PCIE_X1_1 PCIEX16_2 PCIE_X1_2 PCIEX16_3 Slot No. 1-6 Slot Description 1 PCIe 4.0/3.0 x16_1 slot 2 PCIe 4.0 x1_1 slot 3 PCIe 4.0/3.0 x16_2 slot 4 PCIe 4.0 x1_2 slot 5 PCIe 4.
PCIe operating mode Slot Description PCIe x16_1 PCIe x16_2 PCIe x16_3 M.2_1 (PCIe Mode) M.2_1 (SATA Mode) M.2_2 (PCIe Mode) M.2_2 (SATA Mode) Single VGA / PCIe card x16 (PCIe 4.0) N/A N/A x4 (PCIe 4.0) Support x4 (PCIe 4.0) Support PCIe operating mode Dual VGA / PCIe card x8 (PCIe 4.0) x8 (PCIe 4.0) N/A x4 (PCIe 4.0) Support x4 (PCIe 4.0) Support Triple VGA / PCIe card x8 (PCIe 4.0) x8 (PCIe 4.0) x4 (PCIe 4.0) x4 (PCIe 4.0) Support x4 (PCIe 4.
1.1.6 1. Onboard LEDs Q LEDs (DRAM, CPU, VGA, BOOT) Chapter 1 Q LEDs check key components (DRAM, CPU, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found, the corresponding LED remains lit until the problem is solved. This user-friendly design provides an intuitive way to locate the root problem within seconds.
3. PCH LED Chapter 1 The motherboard comes with six standby power LED. The illustration below shows the location of the onboard PCH LED. STRIX X570-e GAMING PCH LED Lighting ROG STRIX X570-E GAMING PCH_LED Lighting 4. BIOS Flashback LED (FLBK_LED) The FLBK LED lights when the USB Flashback button is pressed for three seconds.
1.1.7 1. Headers Clear RTC RAM jumper (2-pin CLRTC) Chapter 1 This jumper allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. STRIX X570-e GAMING +3V_BAT GND CLRTC PIN 1 ROG STRIX X570-E GAMING Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4.
2. AURA RGB header (4-pin RGB_HEADER1/2) These connectors are for RGB LED strips. A PIN 1 +12V G R Chapter 1 A RGB_HEADER1 B B RGB_HEADER2 PIN 1 STRIX X570-e GAMING +12V G R B B ROG STRIX X570-E GAMING RGB_HEADER connectors The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3 m.
3. Addressable RGB header (4-1 pin ADD_GEN2_1/2) These connectors are for individually addressable RGB WS2812B LED strips with embedded WS2811LED driver ICs. Chapter 1 ADD_GEN2_1 Ground Data +5V PIN 1 STRIX X570-e GAMING ADD_GEN2_2 Ground +5V Data PIN 1 ROG STRIX X570-E GAMING ADD_HEADER headers The addressable RGB header supports WS2812B addressable RGB LED strips (5V/Data/ Ground), with a maximum power rating of 3A (5V) and a maximum of 120 LEDs.
4. Thermal sensor connector (2-pin T_SENSOR) Chapter 1 This connector is for the thermistor cable that monitors the temperature of the devices and the critical components inside the motherboard. STRIX X570-e GAMING T_SENSOR GND PIN 1 SENSOR IN ROG STRIX X570-E GAMING T_SENSOR connector 1.1.8 1.
2. AMD Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-8) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. Chapter 1 If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, and RAID 10 configuration through the onboard AMD X570 chipset.
3. USB 3.2 Gen2 front panel connector (U32G2_C9) Chapter 1 This connector allows you to connect a USB 3.2 Gen2 module for additional USB 3.2 Gen2 ports. The latest USB 3.2 Gen2 connectivity provides data transfer speeds of up to 10 Gbps. The next-generation standard is completely backward-compatible with your existing USB devices. U32G2_C9 STRIX X570-e GAMING SBU2 SBU1 CC1 VBUS RX1RX1+ GND TX1TX1+ VBUS VBUS TX2+ TX2GND RX2+ RX2GND DD+ CC2 ROG STRIX X570-E GAMING USB3.
5. USB 2.0 connectors (10-1 pin USB12; USB34) Chapter 1 These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mb/s connection speed.
7. System panel connectors (10-1 pin F_PANEL; 4-pin SPEAKER) Chapter 1 These connectors supports several chassis-mounted functions. STRIX X570-e GAMING ROG STRIX X570-E GAMING SPEAKER & F_PANEL connectors • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
8. CPU, CPU optional, and chassis fan connectors; M.2 fan connector, water pump+, and AIO pump connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_ FAN1-3; 4-pin M.
9. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V_1; 4-pin EATX12V_2) A EATXPWR +12V DC +12V DC +12V DC +12V DC B EATX_12V_2 EATX_12V_1 +DC_IN +DC_IN B A PIN 1 GND GND GND GND GND GND PIN 1 STRIX X570-e GAMING +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND +5 Volts GND +5 Volts GND +3 Volts +3 Volts Chapter 1 These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation.
10. M.2 sockets (M.2_1; M.2_2) These sockets allow you to install M.2 SSD modules. A Chapter 1 M.2_1(SOCKET3) 22110 2280 2260 2242 B STRIX X570-e GAMING M.2_2(SOCKET3) A 22110 2280 2260 2242 B ROG STRIX X570-E GAMING M.2 sockets • For 3rd Generation AMD Ryzen™ processors, the M.2 socket 3 supports PCIe 4.0 x4 mode and SATA mode M Key design and type 2242 / 2260 / 2280 / 22110 storage devices.
11. SPI TPM connector (14-1 pin SPI_TPM) Chapter 1 This connector supports a Trusted Platform Module (TPM) system, which securely stores keys, digital certificates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity. SPI_TPM PIN 1 STRIX X570-e GAMING +1.
13. PCH fan connector (4 pin PCH_FAN) The PCH Fan connector is for connecting the PCH fan on your PCH cover.
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 2.1.1 Motherboard installation Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. 2. Remove the screws that secure the PCH cover (A), then remove the PCH cover (B). Chapter 2 1.
Chapter 2 3. Remove the screws that secure the M.2 heatsink (A), then remove the M.2 heatsink (B). 4. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. STRIX X570-e GAMING DO NOT over tighten the screws! Doing so can damage the motherboard.
2.1.2 CPU installation The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
CPU Heatsink and fan assembly Type 2 2 Chapter 2 1 3 When using this type of CPU fan, remove the screws and the retention module only. Do not remove the plate on the bottom.
To install an AIO cooler Chapter 2 AIO_PUMP CPU_FAN CPU_OPT 2-6 Chapter 2: Basic Installation
DIMM installation Chapter 2 2.1.
2.1.5 ATX power connection A B OR Chapter 2 2.1.6 3 4 AND • DO NOT connect the 4-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs.
2.1.7 Front I/O connector To install the front panel connector To install USB 3.2 Gen2 connector USB 3.2 Gen2 To install USB 2.0 connector Chapter 2 This connector will only fit in one orientation. Push the connector until it clicks into place. To install front panel audio connector AAFP USB 2.
2.1.
2.1.9 M.2 installation Supported M.2 type varies per motherboard. M.2 installation 3 3 4 4 5 5 6 Chapter 2 6 3 3 4 4 5 5 6 6 3 4 5 6 ASUS ROG STRIX X570-E GAMING Before securing the motherboard to the chassis, please remove the PCH cover first and then the M.2 heatsink.
2.1.10 Wi-Fi antenna installation Installing the ASUS 2x2 dual band W-Fi antennas Connect the bundled ASUS 2x2 dual band Wi-Fi antennas to the Wi-Fi ports at the back of the chassis. Chapter 2 • Ensure that the ASUS 2x2 dual band Wi-Fi antennas are securely installed to the Wi-Fi ports. • Ensure that the antennas are at least 20 cm away from all persons. The illustration above is for reference only.
2.2 BIOS update utility USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system. Simply insert a USB storage device to the USB port, press the USB BIOS Flashback button for three seconds, and the BIOS is updated automatically. To use USB BIOS Flashback: 1. Insert a USB storage device to the USB Flashback port. 2. Visit https://www.asus.com/support/ and download the latest BIOS version for this motherboard. 3.
2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection 1 2 Chapter 2 12 11 3 10 4 9 5 8 7 6 Rear panel connectors 1. DisplayPort 2. USB 3.2 Gen2 ports 1~4 3. 2.5G LAN (RJ-45) port* 4. LAN (RJ-45) port* 5. Wi-Fi 802.11 a/b/g/n/ac/ax, Bluetooth V5.0 6. Audio I/O ports** 7. Optical S/PDIF OUT port 8. USB 3.2 Gen2 Type-CTM port C8 9. USB 3.2 Gen2 port 7 10. USB 3.2 Gen2 ports 5 and 6 11. USB BIOS FlashbackTM button 12.
* LAN port LED indications ACT/LINK SPEED LED LED Speed LED Status Description Status Description OFF No link OFF 10 Mbps connection ORANGE Linked ORANGE 100 Mbps connection BLINKING Data activity GREEN 1 Gbps connection Realtek RTL8125-CG 2.5G LAN port LED indications Activity Link LED Speed LED Status Description Status Description OFF No link OFF 100 Mbps connection GREEN Linked GREEN 2.
2.3.
Connect to 4-channel Speakers Chapter 2 Connect to 5.1-channel Speakers Connect to 7.
2.3 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: 6. a. Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 3: BIOS Setup BIOS Setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 Advanced Mode By default, the Advanced Mode screen appears when you enter the BIOS setup program. The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the EZ Mode, click EzMode(F7) or press . The default screen for entering the BIOS setup program can be changed.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings.
Search (F9) This button allows you to search by BIOS item name, enter the item name to find the related item listing. AURA (F4) This button allows you to turn the RGB LED lighting on or off. [All On] All AURA effects will be enabled. (Default mode) [Stealth Mode] All LEDs (Aura and Functional) will be disabled. [Aura Only] AURA LEDs will be enabled and functional LEDs will be disabled. [Aura Off] AURA LEDs will be disabled and functional LEDs will be enabled.
3.2.2 EZ Mode The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the hotkey.
3.2.3 Q-Fan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Chapter 3 3-8 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. OC setup OC Tuning To start OC Tuning: 1. Press on your keyboard or click EZ Tuning Wizard screen, and then click Next. 2. Select a PC scenario Daily Computing or Gaming/Media Editing, and then click Next.
3. Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not sure, and then click Next. 4. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning. 3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.
Adding items to My Favorites To add BIOS items: from the BIOS screen to open 1. Press on your keyboard or click Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3. Select an item from main menu panel, then click the submenu that you want to save as or press on your keyboard.
3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. 3.5 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.1.
Custom CPU Core Ratio This item allows you to set a custom CPU core ratio. The CPU core ratio is calculated with the formula: 2 * FID/DID. Configuration options: [Auto] [Manual] The following items appear only when you set the Custom CPU Core Ratio to [Manual]. FID This item allows you to set the core frequency multiplier. Use the <+> or <-> to adjust the value. DID This item allows you to set the core frequency divisor. Use the <+> or <-> to adjust the value.
PSS Support This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT objects. Configuration options: [Disabled] [Enabled] NX Mode This item allows you enable or disable no-execute page protection function. Configuration options: [Disabled] [Enabled] SVM Mode This item allows you enable or disable CPU Virtualization. Configuration options: [Disabled] [Enabled] Core Leveling Mode This item allows you to change the number of compute unit in the system.
Hot Plug These items appear only when the SATA Mode Selection is set to [AHCI] and allows you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 3.6.5 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio Controller This item allows you to use the Azalia High Definition Audio Controller.
When system is in sleep, hibernate or soft off states This item allows you to turn the RGB LED lighting on or off when the system is in the sleep, hibernate or soft off states. Configuration options: [All On] [Stealth] [Aura Only] [Aura Off] Realtek 2.5G LAN Controller This item allows you to enable or disable the Realtek 2.5G LAN controllers. Configuration options: [On] [Off] Realtek PXE OPROM This item allows you to enable or disable the Realtek PXE OPROM.
3.6.7 PCI Subsytem Settings SR-IOV Support This item allows you to enable or disable the Single Root IO Virtualization support if your system has SR-IOV capable PCIe devices. Configuration options: [Disabled] [Enabled] 3.6.8 USB Configuration The items in this menu allow you to change the USB-related features. The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None.
3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Q-Fan Configuration The subitems in this menu allow you to configure the Q-Fan features. Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. 3.8 Boot menu The Boot menu items allow you to change the system boot options. Fast Boot [Disabled] Allows your system to go back to its normal boot speed.
Boot from PCI-E/PCI Expansion Devices [Legacy only] This item allows you to select the type of PCI-E/PCI expansion devices that you want to launch. Configuration options: [Ignore] [Legacy only] [UEFI only] Secure Boot This item allows you to configure the Windows® Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST. Boot Option Priorities These items specify the boot device priority sequence from the available devices.
Check the ASUS support site for a full list of SSDs tested with ASUS Secure Erase. The drive may become unstable if you run ASUS Secure Erase on an incompatible SSD. The time to erase the contents of your SSD may take a while depending on its size. Do not turn off the system during the process. Displays the available SSDs Status definition: Chapter 3 3-20 • Frozen. The frozen state is the result of a BIOS protective measure.
3.9.3 ASUS User profile This item allows you to store or load multiple BIOS settings. Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version.
3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select OK to load the default values.
3.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS‑based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press . 2.
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. To update the BIOS by Internet: Enter the Advanced Mode of the BIOS setup program.
3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.
Chapter 3 3-26 Chapter 3: BIOS Setup
Chapter 4: RAID Support RAID Support 4.1 AMD RAID Array configurations 4 The motherboard comes with the RaidXpert2 Configuration Utility that supports Volume, RAIDABLE, RAID 0, RAID 1, and RAID 10 (depends on system licensing) configurations. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support. 4.1.
Chapter 4 4-2 Chapter 4: RAID Support
Appendix Appendix Code 00 01 02 03 04 06 Description Not used Power on. Reset type detection (soft/hard).
Q-Code table Code Appendix E0 E1 E2 E3 E4 – E7 E8 E9 EA EB EC – EF F0 F1 F2 F3 F4 F5 – F7 F8 F9 FA FB – FF 60 61 62 63 – 67 68 69 Description S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) S3 Boot Script execution Video repost OS S3 wake vector call Reserved for future AMI progress codes S3 Resume Failed S3 Resume PPI not Found S3 Resume Boot Script Error S3 OS Wake Error Reserved for future AMI error codes Recovery condition triggered by firmware (Auto recovery) Recovery condition triggere
Q-Code table Description Boot Device Selection (BDS) phase is started Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization PCI Bus Enumeration PCI Bus Request Resources PCI Bus Assign Resources Console Output devices connect Console input devices connect Super IO Initialization USB initialization is started USB Reset USB Detect USB Enable Reserved for future AMI codes IDE initialization is started IDE Reset IDE Detect IDE Enable SCSI initialization is sta
Q-Code table Appendix Code B4 B5 B6 B7 B8– BF D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC Description USB hot plug PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) Reserved for future AMI codes CPU initialization error System Agent initialization error PCH initialization error Some of the Architectural Protocols are not available PCI resource allocation error.
Notices FCC Compliance Information Asus Computer International Appendix Responsible Party: Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 Identification of the assembled product: INTEL® Wi-Fi 6 AX200 Identification of the modular components used in the assembly: Model Name: INTEL® Wi-Fi 6 AX200 FCC ID: PD9AX200NG This device complies with part 15 of the FCC Rules.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) Appendix This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Appendix Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
NCC: Taiwan Wireless Statement Appendix 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干 擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項 合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、 科學及醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。 Japan RF Equipment Statement 屋外での使用について 本製品は、5GHz帯域での通信に対応しています。電波法の定めにより5.2GHz、5.
ASUS ROG STRIX X570-E GAMING Forenklet EU-overensstemmelseserklæring ASUSTeK Computer Inc. erklærer hermed at denne enhed er i overensstemmelse med hovedkravene og øvrige relevante bestemmelser i direktivet 2014/53/EU. Hele EU-overensstemmelseserklæringen kan findes på https://www.asus.com/support/ Wi-Fi, der bruger 5150-5350 MHz skal begrænses til indendørs brug i lande, der er anført i tabellen: Vereenvoudigd EU-conformiteitsverklaring ASUSTeK Computer Inc.
Appendix Supaprastinta ES atitikties deklaracija Šiame dokumente bendrovė „ASUSTek Computer Inc.“ pareiškia, kad šis prietaisas atitinka pagrindinius reikalavimus ir kitas susijusias Direktyvos 2014/53/ES nuostatas. Visas ES atitikties deklaracijos tekstas pateikiamas čia: https://www.asus.
ASUS contact information ASUSTeK COMPUTER INC. Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com Appendix Address Telephone Fax Web site +86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 48720 Kato Rd., Fremont, CA 94538, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.
Appendix A-12 Appendix
