E17963 First Edition / January 2021 SERVICE MANUAL More info:
COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents Disclaimer......................................................................................................................4 Safety precautions......................................................................................................4 Major components.....................................................................................................6 Installation tools.........................................................................................................
Disclaimer ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. Safety precautions • Keep liquids or moisture away from your Notebook PC before installing or removing any components. • Ensure to place your Notebook PC on a stable surface before installing or removing any components. • Detach the clip or flap before removing the signal cables to prevent damage.
• Before handling components, use a grounded wrist strap or touch a safely grounded object to avoid damaging them due to static electricity. • Keep liquids or moisture away from your Notebook PC to avoid short circuits. • Hold components by the edges to avoid touching the ICs. • Ensure to properly install all the components before connecting the AC power. • Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion.
Major components USB Type-A connector HDMI connector LAN connector DC IN connector USB Type-A connector USB Type-A connector Audio jack Motherboard with ports and connectors 15 Fan/Cooling radiator Keyboard RAM module SSD module LCD panel module Power adapter Battery and power connector NOTE: The illustration is for reference only.
Installation tools Screwdriver Service Manual Plastic blade Tweezers 7
Removing the compartment cover A. Remove the screw(s) from the Notebook PC’s compartment cover. B. Loosen the Pop-open Screw without removing the screw from the cover. C. To prevent pulling on and causing damage to the cables connected, slightly lift the cover to reveal the compartment without removing the cover completely.
To reattach the compartment cover: A. Align and reattach the cover of the compartment. B. Secure the cover using the screw(s) you removed earlier. C. Tighten the Pop-open Screw.
Cover screw map Model G533QS G513QR GL543IR G533QR G513QM GL543IM G533QM G513IR PX513QR G543QS G513IM PX513QM G543QR GL543QR PX513IR G543QM GL543QM PX513IM M2.5 X 12 (7PCS) M2.5 X 6 (3PCS) M2.
Model G513QC GL543QC PX513QC G513QE GL543QE PX513QE G513QH GL543QH PX513QH G513IC GL543IC PX513IC G513IE GL543IE PX513IE G513IH GL543IH PX513IH M2.5 X 9 (7PCS) M2.5 X 4.5 (3PCS) M2.
Installing a RAM module Upgrade the memory capacity of your Notebook PC by installing a RAM (Random Access Memory) module in the memory module compartment. The following steps show you how to install a RAM module into your Notebook PC: WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover.
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Align and insert the RAM module into the RAM module slot. C. Push down the RAM module until it clicks in place.
Installing an M.2 card Refer to the following steps when installing a compatible M.2 card in your Notebook PC: IMPORTANT! Purchase your M.2 card from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability. WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover.
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Align and insert the M.2 card into its card module slot. C. Secure the M.2 card in place using the bundled screw(s).
Wiring and connection diagrams Top View 16 Service Manual
Bottom View 1. USB Type-A connector 14. Touchpad connector 2. USB Type-A connector 15. Keyboard connector 3. Audio jack 16. Keyboard connector 4. USB Type-C connector 17. EDP connector 5. USB Type-A connector 18. Battery connector 6. HDMI connector 19. 7. LAN connector 20. DIMM connector 8. DC IN connector 21. Light bar R connector 9. Left fan connector 22. Right fan connector Keyboard hotkey and power key connector 10. Logo LED connector 23. SSD1 connector 11.
Service Manual
