ASUS Essentio Desktop PC CG8250 User Manual e6196_CG8250_manual1129.
E6196 English First Edition November 2010 Copyright © 2010 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Contents English Notices ............................................................................................................v Safety information.......................................................................................... vii Conventions used in this guide..................................................................... viii Where to find more information.................................................................... viii Package contents.....................................
Contents English ASUS AI Manager...................................................................................... 6-10 Nero 9 ...................................................................................................... 6-15 Recovering your system............................................................................ 6-19 Chapter 7 Troubleshooting Troubleshooting...........................................................................................
Notices English REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules.
RF exposure warning English This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Safety information • • • • • • • • • • • • • English Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth. DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
Conventions used in this guide English To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information ������������������������������������������ to prevent injury to yourself when trying to complete a task. CAUTION: Information ������������������������������������������������ to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task.
English Package contents ASUS Essentio Desktop PC Keyboard x1 Mouse x1 Power cord x1 Support DVD x1 Recovery DVD x1 Installation Guide Nero 9 burning software DVD x1 Installation Guide x1 Warranty card x1 • If any of the above items is damaged or missing, contact your retailer. • The illustrated items above are for reference only. Actual product specifications may vary with different models. ix e6196_CG8250_manual1129.
English e6196_CG8250_manual1129.
Chapter 1 Getting started Welcome! Thank you for purchasing the ASUS Essentio CG8250 Desktop PC! The ASUS Essentio CG8250 Desktop PC provides cutting-edge performance, uncompromised reliability, and user-centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system casing. Read the ASUS Warranty Card before setting up your ASUS Desktop PC. Getting to know your computer Illustrations are for reference only.
English 1. Power button. Press this button to turn on your computer. 2. Secure Digital™ / MultiMediaCard slot. Insert a Secure Digital™ card or MultiMediaCard into this slot. 3. CompactFlash® / Microdrive™ card slot. Insert a CompactFlash® / Microdrive™ card into this slot. 4. Memory Stick™ / Memory Stick Pro™ card slot. Insert a Memory Stick™ / Memory Stick Pro™ card into this slot. 5. Memory card reader LED.
Power connector. Plug the power cord to this connector. 2. Power switch. Switch to turn ON/OFF the power supply to your computer. 3. Air vents. These vents allow air ventilation. English 1. DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer. 4. PS/2 Keyboard / Mouse Combo port (purple/green). This port is for a PS/2 keyboard or mouse. 5. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.
English 13. Side Speaker Out port (gray). This port connects to the side speakers in an 8-channel audio configuration. 14. Rear Speaker Out port (black). This port connects to the rear speakers in a 4, 6, and 8-channel audio configuration. 15. Center/Subwoofer port (orange). This port connects to the center/subwoofer speakers. 16. Microphone port (pink). This port connects to a microphone. 17. Line Out port (lime). This port connects to a headphone or speaker.
Setting up your computer English This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord, to your computer. Connecting an external monitor Using the ASUS Graphics Card (on selected models only) Connect your monitor to the display output port on the discrete ASUS Graphics Card. To connect an external monitor using the ASUS Graphics Card: 1. Connect a monitor to a display output port on the ASUS Graphics Card. 2.
Using the onboard display output ports English Connect your monitor to the onboard display output port. To connect an external monitor using the onboard display output ports: 1. Connect a VGA monitor to the VGA port, or a DVI-D monitor to the DVI-D port, or an HDMI monitor to the HDMI port on the rear panel of your computer. 2. Plug the monitor to a power source. • If your computer comes with an ASUS Graphics Card, the graphics card is set as the primary display device in the BIOS.
Connecting a USB keyboard and a USB mouse English Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer. Connecting the power cord Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source. ASUS CG8250 e6196_CG8250_manual1129.
Turning your computer ON/OFF This section describes how to turn on/off your computer after setting up your computer. English Turning your computer ON To turn your computer ON: 1. Turn your monitor ON. 2. Turn the power switch ON, then press the power button on your computer. Power button ON OFF 3. Wait until the operating system loads automatically. Turning your computer OFF To turn your computer OFF: 1. Close all running applications. 2. Click 3. Click on the Windows® desktop.
Chapter 2 Using Windows® 7 Starting for the first time When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows® 7 operating system. To start for the first time: 1. Turn your computer on. Wait for a few minutes until the Set Up Windows screen appears. 2. From dropdown list, select your language. Click Next. 3. From the dropdown lists, select your Country or region, Time and currency, and Keyboard layout. Click Next. 4.
Using Windows® 7 desktop English Click the Start icon > Help and Support to obtain more information about Windows® 7. Start menu Notification area Taskbar Using the Start menu The Start menu gives you access to programs, utilities, and other useful items on your computer. It also provides you with more information about Windows 7 through its Help and Support feature. Launching items from the Start menu To launch items from the Start menu: 1. From the Windows® taskbar, click the Start icon 2.
Using the Getting Started item English The Getting Started item on the Start menu contains information about some basic tasks such as personalizing Windows®, adding new users, and transferring files to help you to familiarize yourself with using Windows® 7. To use the Getting Started item: 1. From the Windows® taskbar, click the Start icon to launch the Start menu. 2. Select Getting Started. The list of available tasks appears. 3. Select the task that you want to do.
Pinning items on the jumplists English When you right-click an icon on the taskbar, a jumplist launches to provide you with quick-access to the program’s or item’s related links.You may pin items on the jumplist such as favorite websites, often-visited folders or drives, or recently played media files. To pin items to the jumplist: 1. From the taskbar, right-click an icon. 2. From the jumplist, right-click the item that you want to pin, then select Pin to this list.
Unpinning programs from the Start menu 1. From the Windows® taskbar, click the Start icon 2. From the Start menu, right-click the program that you want to unpin, then select Remove from this list. English To unpin programs from the Start menu: to launch the Start menu. Unpinning programs from the taskbar To unpin programs from the taskbar: 1. From the taskbar, right-click the program that you want to remove from the taskbar, then select Unpin this program from taskbar.
Customizing icons and notifications English You may choose to display or hide the icons and notifications on the taskbar or on the notification area. To customize icons and notifications: 1. From the notification area, click on the arrow icon 2. Click Customize. 3. From the dropdown list, select the behaviors for the icons or items that you want customize. 2-6 e6196_CG8250_manual1129.indb 6 .
Managing your files and folders Using Windows® Explorer English Windows® Explorer allows you to view, manage, and organize your files and folders. Launching Windows® Explorer To launch Windows Explorer: 1. From the Windows® taskbar, click the Start icon 2. Click Computer to launch Windows Explorer. Breadcrumb bar to launch the Start menu. View icon Toolbar Navigation pane Search bar Preview icon View pane Exploring files and folders To explore files and folders: 1. Launch Windows Explorer. 2.
Customizing the file/folder view English To customize the file/folder view: 1. Launch Windows Explorer. 2. From the navigation pane, select the location of your data. 3. From the toolbar, click the View icon 4. From the View menu, move the slider to select how you want to view the file/folder. . You may also right-click anywhere on the View pane, click View, and select the view type that you want. Arranging your files To arrange your files: 1. Launch Windows Explorer. 2.
Sorting your files 1. Launch Windows Explorer. 2. Right-click anywhere on the View pane. 3. From the menu that appears, select Sort by, then select your preferred sorting type. English To sort your files: Grouping your files To group your files: 1. Launch Windows Explorer. 2. Right-click anywhere on the View pane. 3. From the menu that appears, select Group by, then select your preferred grouping type. Adding a new folder To add a new folder: 1. Launch Windows Explorer. 2.
Backing up your files English Setting up a backup To set up a backup: > All Programs > Maintenance > Backup and Restore. 1. Click 2. Click Set up backup. Click Next. 3. Select your backup destination. Click Next. 4. Select Let Windows choose (recommended) or Let me choose as your backup mode. If you select Let Windows choose, Windows will not back up your programs, FATformatted files, Recycle Bin files, or temporary files that are 1GB or more. 5.
Protecting your computer Using Windows® 7 Action Center English Windows® 7 Action Center provides you with alert notifications, security information, system maintenance information, and the option to automatically troubleshoot and fix some common computer problems. You may customize the notifications. For more details, refer to the previous section Customizing icons and notifications in this chapter. Launching Windows® 7 Action Center To launch Windows® 7 Action Center: 1.
Using Windows® Update English Windows Update allows you to check and install the latest updates to enhance the security and performance of your computer. Launching Windows® Update To launch Windows® Update: 1. From the Windows® taskbar, click the Start icon 2. Select All Programs > Windows Update. 3. From the Windows Update screen, click the task that you want to do. 2-12 e6196_CG8250_manual1129.indb 12 to launch the Start menu.
Setting up a user account and password English You may create user accounts and passwords for people who will use your computer. Setting up a user account To set up a user account: > Getting Started > Add new users. 1. From the Windows® taskbar, click 2. Select Manage another account. 3. Select Create a new account. 4. Key in the name of the new user. 5. Select either Standard user or Administrator as the user type. 6. When done, click Create Account. ASUS CG8250 e6196_CG8250_manual1129.
Setting up a user’s password English To set up a user’s password: 1. Select the user that you would like to set a password. 2. Select Create a password. 3. Key in a password and confirm it. Key in your password’s hint. 4. When done, click Create password. 2-14 e6196_CG8250_manual1129.
Activating the anti-virus software English Trend Micro Internet Security is pre-installed on your computer. It is a third-party anti-virus software protecting your computer from virus attacking. It is purchased separately. You have a 30-day trial period after activating it. To activate Trend Micro Internet Security: 1. Run the Trend Micro Internet Security application. 2. Carefully read the license terms. Click Agree & Activate. 3. Input your e-mail address and select your location. Click Next. 4.
English 2-16 e6196_CG8250_manual1129.
Chapter 3 Connecting devices to your computer Connecting a USB storage device This desktop PC provides USB 2.0/1.1 ports on both the front and rear panels. The USB ports allow you to connect USB devices such as storage devices. To connect a USB storage device: • Insert the USB storage device to your computer. Front panel Rear panel To remove a USB storage device: 1. Click from the Windows notification area on your computer, then click Eject USB2.0 FlashDisk. 2.
Connecting microphone and speakers English This desktop PC comes with microphone ports and speaker ports on both the front and rear panels. The audio I/O ports located on the rear panel allow you to connect 2-channel, 4-channel, 6-channel, and 8-channel stereo speakers. Connecting Headphone and Mic Connecting 2-channel Speakers e6196_CG8250_manual1129.
English Connecting 4-channel Speakers Connecting 6-channel Speakers e6196_CG8250_manual1129.
Connecting 8-channel Speakers English e6196_CG8250_manual1129.
Your desktop PC may come with VGA, HDMI, or DVI ports and allows you to connect multiple external displays. When a graphics card is installed in your computer, connect the monitors on the output ports of the graphics card. English Connecting multiple external displays Setting up multiple displays When using multiple monitors, you are allowed to set display modes. You can use the additional monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop.
English 3. Turn on your computer. 4. Do any of the following to open the Screen Resolution setting screen: • Click > Control Panel > Appearance and Personalization > Display > Change display settings. • Right click anywhere on your Windows desktop. When the pop-up menu appears, click Personalize > Display > Change display settings. 5. Select the display mode from the Multiple displays: drop-down list.
Connecting an HDTV • You need an HDMI cable to connect the HDTV and the computer. The HDMI cable is purchased separately. • To get the best display performance, ensure that your HDMI cable is less than 15 meters. e6196_CG8250_manual1129.indb 7 English Connect a High Definition TV (HDTV) to the HDMI port of your computer.
English e6196_CG8250_manual1129.
Chapter 4 Using your computer Proper posture when using your Desktop PC When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC.
Using the memory card reader English Digital cameras and other digital imaging devices use memory cards to store digital picture or media files. The built-in memory card reader on the front panel of your system allows you to read from and write to different memory card drives. 1 To use the memory card: 1. Insert the memory card into the card slot. • A memory card is keyed so that it fits in only one direction. DO NOT force a card into a slot to avoid damaging the card.
English Using the optical drive 2 1 3 Inserting an optical disc To insert an optical disc: 1. While your system is on, press the eject button below the drive bay cover to open the tray. 2. Place the disc to the optical drive with the label side facing up. 3. Push the tray to close it. 4. Select a program from the AutoPlay window to access your files.
Using the multimedia keyboard (on selected models only) English The keyboard varies with models. The illustrations on this section are for reference only. ASUS SK-2045 keyboard 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 19 ` 20 3 4 21 5 22 Keys 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Description Launches Windows® gadgets. Activates Windows® Flip 3D. Reduces picture size in Windows® Photo Viewer. Increases picture size in Windows® Photo Viewer. Functions with keys F1~F12.
English ASUS-Razer Arctosa Gaming keyboard Keys 1. 2. 3. 4. 5. 6. 7. 8. Description 1 2 3 4 5 6 Plays or pauses playback in a media player. Stops playback in a media player. Goes to the previous track in a media player. 8 7 Goes to the next track in a media player. Decreases the system volume. Increases the system volume. Turns the volume’s mute mode on/off. Switches profiles working with F1 ~ F10 keys. • The special function keys work on Windows® XP / Vista / 7 operating systems.
BTC 6200C keyboard English 1 2 3 4 5 6 7 8 9 10 11 12 13 ` Keys 1. 2. 3. 4. 5. 6. 7. Description Enters into sleep mode. Press any key to wake up your computer and return to the previous working status. Returns to the last page you viewed. Goes to the next page you viewed before. Launches the default homepage in Windows® Internet Explorer. Launches the Favorites folder in Windows® Internet Explorer. Launches your default email application. Keys 8. 9. 10. 11. 12. 13.
English ASUS PRIMAX/KB2621 keyboard Keys 1. 2. 3. 4. 5. 6. Description 1 2 3 5 6 Increases the system volume. Turns the volume’s mute mode on/off. Increases the system volume. Goes to the previous track in a media player. 4 Plays or pauses playback in a media player. Goes to the next track in a media player. The special function keys only work on Windows® Vista / Windows® 7 operating systems. ASUS CG8250 e6196_CG8250_manual1129.
English 4-8 e6196_CG8250_manual1129.
Chapter 5 Connecting to the Internet Wired connection Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN). Connecting via a DSL/cable modem To connect via a DSL/cable modem: 1. Set up your DSL/cable modem. Refer to the documentation that came with your DSL/cable modem. 2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem. Modem RJ-45 cable 3.
Connecting via a local area network (LAN) To connect via a LAN: English 1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN. RJ-45 cable 2. Turn on your computer. 3. Configure the necessary Internet connection settings. LAN Contact your network administrator for details or assistance in setting up your Internet connection. 5-2 e6196_CG8250_manual1129.
Chapter 6 Using the Utilities The Support DVD and Recovery DVD may not be included in the package. You may use the Recovery Partition feature to create the Support DVD and Recovery DVD. For details, refer to Recovering your system in this chapter. ASUS AI Suite II ASUS AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously. Installing AI Suite II To install AI Suite II: 1.
The Tool menu The Tool menu includes the EPU, Probe II, and Sensor Recorder panels. English Launching EPU EPU is an energy-efficient tool that provides you with a total power-saving solution. It detects the current loading and intelligently adjusts the power usage in real-time. When you select the Auto mode, the system changes modes automatically according to the current system status.
Launching and configuring Probe II English Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. To launch Probe II: • Click� Tool > Probe II on the AI Suite II main menu bar.
Launching and configuring Sensor Recorder English Sensor Recorder allows you to monitor the changes in the system voltage, temperature, and fan speed, as well as recording the changes. To launch Sensor Recorder: • Click Tool > Sensor Recorder on the AI Suite II main menu bar. To configure Sensor Recorder: • Click the Voltage/Temperature/Fan Speed tabs and select the sensors that you want to monitor. • The History Record tab allows you to record the changes in the sensors that you enable.
The Monitor menu English The Monitor menu includes the Sensor and CPU Frequency panels. Launching Sensor The Sensor panel ������������������������������������������������������������������������ displays the current value of a system sensor such as fan rotation, CPU temperature, and voltages. To launch Sensor: • Click Monitor > Sensor on the AI Suite II main menu bar.
The Update menu English The Update menu allows you to update the motherboard BIOS and the BIOS boot logo with the ASUS designed update utilities . ASUS Update The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® OS.
Click Yes if you want to change the boot logo, which is the image appearing on screen during the Power‑On Self-Tests (POST).� Otherwise, click No. 5. Follow the onscreen instructions to complete the update process. English 4. Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. From the ASUS Update screen, select Update BIOS from file, then click Next. 2. Locate the BIOS file from the Open window, click Open, and click Next. 3.
The System Information screen English The System Information screen displays the information about the motherboard, CPU, and memory slots. • Click the MB tab to see the details on the motherboard manufacturer, product name, version, and BIOS. • Click the CPU tab to see the details on the processor and the Cache. • Click the SPD tab and then select the memory slot to see the details on the memory module installed on the corresponding slot. 6-8 e6196_CG8250_manual1129.
The Settings screen • Application allows you to select the application that you want to enable. • Bar allows you to modify the bar setting, • Skin allows you to customize the interface’s contrast, brightness, saturation, hue, and gamma. ASUS CG8250 e6196_CG8250_manual1129.indb 9 English The Settings screen allows you to customize the main menu bar settings and the interface’s skin.
ASUS AI Manager English ASUS AI Manager is a utility which gives you quick and easy access to frequently-used applications. Installing AI Manager To install AI Manager: 1. Place the support DVD in the optical drive. If Autorun is enabled, the Drivers installation wizard appears. If Autorun is disabled, double-click the setup.exe file from the ASUS AI Manager folder in the support DVD. 2. Click the Utilities tab, then click ASUS AI Manager. 3.
AI Manager quick bar English The AI Manager quick bar saves the desktop space and allows you to launch the ASUS utilities or display system information easily. Click any of the Main, My Favorites, Support or Information tab to display the menu’s contents. Exit button Switch to main Window Add to ToolBar Main My Favorites Support Information Click the Maximize/restore button to switch between full window and quick bar. Click the Minimize button to keep the AI Manager on the taskbar.
AI Security English AI Security enables you to set a password to secure your devices, such as USB flash disks and CD/DVD disks, from unauthorized access. To lock a device: 1. When using AI Security for the first time, you are asked to set a password. Key in a password with at most 20 alphanumeric characters. 2. Confirm the password. 3. Key in the password hint (recommended). 4. When done, click Ok. 5. Select the device you want to lock, then click Apply. 6.
AI Booting English AI Booting allows you to specify the boot device priority sequence. To specify the boot sequence: 1. Select a device, then click the left/right button to specify the boot sequence. 2. When done, press Apply. My Favorites My Favorites allows you to add applications that you frequently use, saving you from searching for the applications throughout your computer. To add an application: 1. Click Add, then locate the application you want to add to My Favorites. 2.
Support English Click any links on the Support window to go to the ASUS website, technical support website, download support website, or contact information. Information Click the tab on the Information window to see the detailed information about your system, motherboard, CPU, BIOS, installed device(s), and memory. 6-14 e6196_CG8250_manual1129.
Nero 9 English Nero 9 allows you to create, copy, burn, edit, share, and update different kinds of data. Installing Nero 9 To install Nero 9: 1. Insert the Nero 9 DVD into your optical drive. 2. If Autorun is enabled, the main menu appears automatically. If Autorun is disabled, double-click the SeupX.exe file from the main directory of your Nero 9 DVD. 3. From the main menu, click Nero 9 Essentials. ASUS CG8250 e6196_CG8250_manual1129.
Select the language you want to use for Installation Wizard. Click Next. 5. Click Next to continue. 6. Tick I accept the License Conditions. When done, click Next. English 4. 6-16 e6196_CG8250_manual1129.
Select Typical then click Next. 8. Tick Yes, I want to help by sending anonymous application data to Nero then click Next. 9. When done, click Exit. English 7. ASUS CG8250 e6196_CG8250_manual1129.
Burning files To burn files: English 1. From the main menu, click Data Burning > Add. 2. Select the files that you want to burn. When done, click Add. 6-18 e6196_CG8250_manual1129.
After selecting files that you want to burn, click Burn to burn the files to a disc. English 3. For more details about using Nero 9, refer to the Nero website at www.nero.com Recovering your system Using the Recovery Partition The Recovery Partition quickly restores your Desktop PC’s software to its original working state.
3. Select one of the following recovery options. System Recovery: English This feature allows you to restore the system to the factory default settings. System Image Backup: This feature allows you to burn the system image backup in DVD discs, which you can use later to restore the system to its default settings. System DVD Backup: This feature allows you to make a backup copy of the support DVD. 4. Follow the onscreen instructions to complete the recovery process. Visit the ASUS website at www.asus.
Chapter 7 Troubleshooting Troubleshooting This chapter presents some problems you might encounter and the possible solutions. ? ? My computer cannot be powered on and the power LED on the front panel does not light up • Check if your computer is properly connected. • Check if the wall outlet is functioning. • Check if the Power Supply Unit is switched on. Refer to the section Turning your computer ON/OFF in Chapter 1. My computer hangs.
? English ? ? ? No display on the monitor. • Check if the monitor is powered on. • Ensure that your monitor is properly connected to the video output port on your computer. • If your computer comes with a discrete graphics card, ensure that you connect your monitor to a video output port on the discrete graphics card. • Check if any of the pins on the monitor video connector is bent. If you discover bent pins, replace the monitor video connector cable.
The picture on the HDTV is stretched. • It is caused by the different resolutions of your monitor and your HDTV. Adjust the screen resolution to fit your HDTV. To change the screen resolution: 1. English ? Do any of the following to open the Screen Resolution setting screen: • C lick > Control Panel > Appearance and Personalization > Display > Change display settings. • R ight click anywhere on your Windows desktop.
Power English Problem No power (The power indicator is off) Possible Cause Action Incorrect power voltage • S et your computer’s power voltage switch to your area’s power requirements. • Adjust the voltage settings. Ensure that the power cord is unplugged from the power outlet. Your computer is not turned on. Press the power key on the front panel to ensure that your computer is turned on. Your computer’s power cord is not properly connected.
Problem Cannot access the Internet Possible Cause Action LAN cable problems Ensure the LAN LED is on. If not, try another LAN cable. If it still does not work, contact the ASUS service center. The LAN cable is not connected. Your computer is not properly connected to a router or hub. English LAN Connect the LAN cable to your computer. Ensure that your computer is properly connected to a router or hub. Network settings Contact your Internet Service Provider (ISP) for the correct LAN settings.
System English Problem System speed is too slow The system often hangs or freezes. 7-6 e6196_CG8250_manual1129.indb 6 Possible Cause Too many programs are running. Action Close some of the programs. Computer virus attack • U se an anti-virus software to scan for viruses and repair your computer. • Reinstall the operating system. Hard disk drive failure • Send the damaged hard disk drive to ASUS Service Center for servicing. • Replace with a new hard disk drive.
Problem Too noisy right after turning on the computer. Computer is too noisy when in use. English CPU Possible Cause Action Your computer is booting up. It is normal. The fan runs on its full speed when the computer is powering on. The fan slows down after entering the OS. The BIOS settings have been changed. Restore the BIOS to its default settings. Old BIOS version Update the BIOS to the latest version. Visit the ASUS Support site at http://support.asus.com to download the latest BIOS versions.
English 7-8 e6196_CG8250_manual1129.
ASUS Essentio Desktop PC CG8250 Benutzerhandbuch g6001_cg-series_manual_.
G6196 Erste Ausgabe Dezember 2010 Deutsch Copyright © 2010 ASUSTeK Computer Inc. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs, einschließlich der darin beschriebenen Produkte und Software, darf ohne ausdrückliche, schriftliche Genehmigung von ASUSTeK COMPUTER INC. (“ASUS”) in irgendeiner Form, ganz gleich auf welche Weise, vervielfältigt, übertragen, abgeschrieben, in einem Wiedergewinnungssystem gespeichert oder in eine andere Sprache übersetzt werden.
Inhalt Erklärungen.....................................................................................................v Sicherheitsinformationen............................................................................... vii Darstellungssystematik................................................................................. viii Weitere Informationsquellen......................................................................... viii Verpackungsinhalt..................................................
Inhalt Kapitel 6 Verwenden der Hilfsprogramme ASUS AI Suite II........................................................................................... 6-1 ASUS AI Manager...................................................................................... 6-10 Nero 9 6-15 Systemwiederherstellung........................................................................... 6-19 Deutsch Kapitel 7 Problembehandlung Problembehandlung.......................................................................
Erklärungen REACH Die rechtliche Rahmenbedingungen für REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) erfüllend, veröffentlichen wir die chemischen Substanzen in unseren Produkten auf unserer ASUS REACH-Webseite unter http://csr.asus.com/english/index.aspx. Erklärung der Federal Communications Commission • Deutsch Dieses Gerät stimmt mit den FCC-Vorschriften Teil 15 überein.
RF-Aussetzungswarnung Dieses Gerät und die integrierte Antenne dürfen nicht näher als 20 cm an Ihrem Körper oder in der Nähe befindenden Personen installiert und betrieben werden. Dieses Gerät und seine Antenne(n) dürfen nicht zusammen oder in der Nähe mit anderen Antennen oder Sendern betrieben werden. Endnutzer müssen die spezifischen Betriebsanleitungen für eine RFAussetzung innerhalb der anerkannten Bereiche befolgen.
Sicherheitsinformationen Bevor Sie das Gerät reinigen, trennen Sie es von der Stromversorgung. Wischen Sie den Desktop PC mit einem weichen Tuch oder einem Fensterleder ab, das Sie mit einer Lösung aus einem nicht scheuernden Reinigungsmittel und einigen Tropfen warmem Wasser angefeuchtet haben. Wischen Sie verbleibende Feuchtigkeit mit einem trockenen Tuch ab. • • • • • • • • • • • • Nicht auf unebene oder instabile Oberflächen aufstellen. Bei Beschädigung des Gehäuses den Kundendienst aufsuchen.
Darstellungssystematik Um sicherzustellen, dass Sie bestimmte Aufgaben richtig ausführen, beachten Sie bitte die folgenden Symbole und Schriftformate, die in diesem Handbuch verwendet werden. Deutsch GEFAHR/WARNUNG: Informationen zum Vermeiden von Verletzungen beim Ausführen einer Aufgabe. VORSICHT: Informationen zum Vermeiden von Schäden an den Komponenten beim Ausführen einer Aufgabe. WICHTIG: Anweisungen, die Sie beim Ausführen einer Aufgabe befolgen müssen.
Deutsch Verpackungsinhalt ASUS Essentio Desktop-PC 1x Tastatur 1x Maus 1x Stromversorgungskabel 1x Support-DVD 1x Wiederherstellungs-DVD Installation Guide 1x Nero 9 Brennsoftware DVD 1x Installationsanleitung 1x Garantiekarte • Sollten o.g. Artikel beschädigt oder nicht vorhanden sein, wenden Sie sich bitte an Ihren Händler. • Die oberhalb illustrierten Artikel sind nur zur Referenz gedacht. Die tatsächlichen Produktspezifikationen können sich je nach Modell unterscheiden.
Deutsch g6001_cg-series_manual_.
Kapitel 1 Erste Schritte Willkommen! Vielen Dank für den Kauf eines ASUS Essentio CG8250 Desktop PCs! Der ASUS Essentio CG8250 Desktop PC liefert topaktuelle Leistung, unvergleichliche Zuverlässigkeit und benutzerorientierte Anwendungen. All diese Eigenschaften wurden in diesem verblüffend futuristischen und eleganten Systemgehäuse vereint. Lesen Sie die ASUS Gewährleistungskarte sorgfältig durch, bevor Sie Ihren ASUS Desktop PC in Betrieb nehmen.
Deutsch 1. Stromtaste. Drücken Sie diese Taste, um Ihren Computer einzuschalten. 2. Secure Digital™- / MultiMediaCard- / Memory Stick-Kartensteckplatz. Führen Sie eine Secure Digital™-Karte, MultiMedia-Karte, oder Memory Stick-Karte in diesen Steckplatz ein. 3. CompactFlash®- / Microdrive™-Kartensteckplatz. Führen Sie CompactFlash® / Microdrive™-Karten in diesen Steckplatz ein. 4. Memory Stick™ / Memory Stick Pro™-Kartensteckplatz.
1. Stromanschluss. Verbinden Sie das Stromkabel mit diesem Anschluss. 2. Einschalttaste. Schaltet die Stromversorgung für Ihren Computer An/Aus. 3. Lüftungsöffnungen. Diese Öffnungen dienen der Luftzirkulation. 4. PS/2-tastatur / Maus-Kombianschluss (lila/grün). Für den Anschluss einer PS2Maus oder -Tastatur. 5. USB 2.0-Anschlüsse. Diese Universal Serial Bus 2.0 (USB 2.0)-Anschlüsse nehmen USB 2.0-Geräte wie Maus, Drucker, Kamera, PDA und andere Geräte auf. 6. Optischer S/PDIF-Ausgang.
Deutsch 13. Seitenlautsprecherausgang (grau). Dieser Anschluss verbindet in einer 8-KanalAudiokonfiguration mit den Seitenlautsprechern. 14. Hinterer Lautsprecherausgang (schwarz). Dieser Anschluss verbindet in einer 4Kanal-, 6-Kanal- oder 8-Kanal-Audiokonfiguration mit den hinteren Lautsprechern. 15. Mitte/Subwoofer-Anschluss (orange). Dieser Anschluss verbindet mit den Mitte/Subwoofer-Lautsprechern. 16. Mikrofonanschluss (rosa). Dieser Anschluss verbindet mit einem Mikrofon. 17.
Einrichten Ihres Computers Dieser Abschnitt führt Sie durch das Anschließen wesentlicher Hardware-Geräte wie einen externen Monitor, Tastatur, Maus und Stromkabel an Ihren Computer. Anschließen eines externen Monitors ASUS Grafikkarte verwenden (nur bei bestimmten Modellen) Deutsch Verbinden Sie den Monitor mit dem Anzeigeausgang der eingebauten ASUS Grafikkarte. So verbinden Sie einen externen Monitor mit der ASUS Grafikkarte: 1. Verbinden Sie einen Monitor mit dem Anzeigeausgang der ASUS-Grafikkarte.
Onboard-Grafikkartenausgänge verwenden Verbinden Sie den Monitor mit dem Anzeigeausgang der Onboard-Grafikkarte. So verbinden Sie einen externen Monitor mit der Onboard-Grafikkarte: 1. Schließen Sie einen VGA-Monitor am VGA-Anschluss oder einen DVI-D-Monitor am DVI-D-Anschluss oder einen HDMI-Monitor am HDMI-Anschluss an der Rückseite des Computers an. 2. Schließen Sie den Monitor an die Stromversorgung an.
Anschließen einer USB-Tastatur und USB-Maus Deutsch Verbinden Sie eine USB-Tastatur und USB-Maus mit den USB-Anschlüssen auf der Rücktafel (Rückseite) Ihres Computers. Anschließen des Netzkabels Verbinden Sie ein Ende des Netzkabels mit dem Stromanschluss auf der Rücktafel (Rückseite) Ihres Computers und das andere Ende mit der Steckdose. 1-7 g6001_cg-series_manual_.
Ein-/Ausschalten Ihres Computers. Dieser Abschnitt beschreibt, wie Sie den Computer nach der Einrichtung Ein-/Ausschalten können. Computer einschalten So schalten Sie den Computer ein: Schalten Sie den Monitor ein. 2. Kippen Sie den Stromschalter zu EIN und berühren Sie leicht den Einschaltsensor, um Ihren Computer einzuschalten. Deutsch 1. EIN AUS 3. Warten Sie, bis das Betriebssystem automatisch hochlädt. Computer ausschalten So schalten Sie den Computer aus: 1.
Kapitel 2 Verwenden von Windows® 7 Das erste Starten Beim ersten Start Ihres Computers erscheint eine Abfolge von Fenstern, um Sie durch die Konfiguration der Grundeinstellungen Ihres Windows Windows® 7 Betriebssystems zu führen. So führen Sie den Erststart aus: 1. Schalten Sie den Computer ein. Warten Sie einige Minuten, bis das Fenster Windows einrichten (Set Up Windows) erscheint. 2. Wählen Sie in der Dropdownliste Ihre Sprache. Klicken Sie auf Weiter (Next). 3.
Windows® 7 Desktop verwenden Klicken Sie auf das Startsymbol > Hilfe und Support (Help and Support), um weitere Informationen über Windows® 7 zu erhalten. Deutsch Startmenü Taskleiste Infobereich Das Startmenü verwenden Das Startmenü ermöglicht Ihnen den Zugang zu Programmen, Anwendungen und anderen nützlichen Elementen auf Ihrem Computer. Ebenso bietet es Ihnen weitere Informationen über Windows 7 durch die Funktionen von Hilfe und Support (Help and Support).
Das Element Getting Started verwenden Das im Startmenü aufgelistete Element Erste Schritte (Getting Started) enthält Informationen über allgemeine Aufgaben wie die Personalisierung von Windows®, Hinzufügen neuer Benutzer und Dateitransfer, um Sie mit der Benutzeroberfläche von Windows® 7 vertraut zu machen. So verwenden Sie das Element Erste Schritte: 2. 3. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol laden. Deutsch 1. , um das Startmenü zu Wählen Sie Erste Schritte (Getting Started).
Elemente an die Sprunglisten anheften Ein Rechtsklick auf ein Symbol in der Taskleiste ladet die Sprungliste (Jumplist), um Ihnen einen Schnellzugang zu Bezugslinks eines Programms oder Elements zu erleichtern. Sie können Elemente wie Webseiten-Favoriten, oft verwendete Ordner oder Laufwerke sowie kürzlich abgespielte Mediendateien an die Sprungliste (Jumplist) anheften. Deutsch So heften Sie Elemente an die Sprungliste an: 1. Klicken Sie mit der rechten Maustaste ein Symbol in der Taskleiste an. 2.
Programme vom Startmenü lösen So lösen Sie Programme vom Startmenü: 1. 2. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol laden. , um das Startmenü zu Klicken Sie mit der rechten Maustaste auf das gewünschte Programm in der Startmenü und wählen Sie Von dieser Liste lösen (Unpin from this list). Deutsch Programme von der Taskleiste lösen So lösen Sie Programme von der Taskleiste: 1.
Symbole und Benachrichtigungen anpassen Sie können die Symbole und Benachrichtungen in der Taskleiste oder im Infobereich wahlweise ein- oder ausblenden. So passen Sie Symbole und Benachrichtungen an: Deutsch 1. Klicken Sie im Infobreich auf das Pfeilsymbol 2. Klicken Sie auf Anpassen (Customize). 3. Wählen Sie in der Dropdownliste die gewünschte Verhaltensweise von Symbolen oder Elementen, die Sie anpassen möchten. ASUS CG Serie g6001_cg-series_manual_.indb 6 .
Ihre Dateien und Ordner verwalten Windows® Explorer verwenden Mit Windows® Explorer können Sie Ihre Dateien und Ordner ansehen, verwalten und organisieren. Windows® Explorer öffnen So öffnen Sie den Windows Explorer: 2. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol laden. , um das Startmenü zu Deutsch 1. Klicken Sie auf Computer, um den Windows Explorer zu öffnen.
Datei-/Ordneransicht anpassen So passen Sie die Datei-/Ordneransicht an: Öffnen Sie Windows Explorer. 2. Wählen Sie im Navigationsbereich den Ort Ihrer Daten. 3. Klicken Sie in der Symbolleiste auf das Symbol Ansicht . 4. Bewegen Sie den Auswahlregler im Ansichtsmenü, um die Ansicht der Datei oder des Ordners anzupassen. Deutsch 1. Sie können auch mit der rechten Maustaste den Ansichtsbereich irgendwo anklicken, Ansicht (View) wählen und die gewünschte Ansichtsart bestimmen.
Dateien sortieren 1. Öffnen Sie Windows Explorer. 2. Rechtsklicken Sie irgendwo im Ansichtsbereich. 3. Wählen Sie im erschienenen Kontextmenü Sortieren (Sort by) und dann die von Ihnen gewünschte Sortierungsmethode. Deutsch So sortieren Sie Dateien: Dateien gruppieren So gruppieren Sie Dateien: 1. Öffnen Sie Windows Explorer. 2. Rechtsklicken Sie irgendwo im Ansichtsbereich. 3. Wählen Sie im erschienenen Kontextmenü Gruppieren (Group by) und dann die von Ihnen gewünschte Gruppierungsmethode.
Dateien sichern Ein Backup erstellen So erstellen Sie ein Backup: Klicken Sie auf > Alle Programme (All Programs) > Wartung (Maintenance) > Sichern und wiederherstellen (Backup and Restore). 2. Klicken Sie auf Sicherung einrichten (Set up backup). Klicken Sie auf Weiter (Next). 3. Wählen Sie einen Zielort für Ihren Backup. Klicken Sie auf Weiter (Next). 4.
Computer schützen Windows® 7-Wartungscenter verwenden Windows® 7-Wartungscenter hilft Ihnen bei Warnnachrichten und bietet Sicherheitsinformationen, Informationen zur Systemwartung sowie die Möglichkeit einer automatischen Problembehandlung und Behebung häufig auftretender Computerprobleme. Sie könne die Benachrichtungen selbst anpassen. Für weitere Details beziehen Sie sich auf den vorherigen Abschnitt Symbole und Benachrichtigungen anpassen in diesem Kapitel.
Windows® Update verwenden Windows Update erlaubt Ihnen den Abruf und Installation der neuesten Updates, um die Sicherheit und Leistung Ihres Computers zu verbessern. Windows® Update ausführen So führen Sie Windows® Update aus: 1. Deutsch 2. 3. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol laden. , um das Startmenü zu Wählen Sie Alle Programme (All Programs) > Windows Update. Klicken Sie im Windows Update-Fenster auf die Aufgabe, die Sie ausführen möchten.
Benutzerkonto und Kennwort erstellen Sie können für andere Personen, mit Zugriff auf Ihren Computer, weitere Benutzerkonten sowie Kennwörter erstellen. Ein Benutzerkonto erstellen 1. Klicken Sie in der Windows®-Taskleiste auf > Erste Schritte (Getting Started) > Neue Benutzer hinzufügen (Add new users). 2. Wählen Sie Anderes Konto verwalten (Manage another account). 3. Wählen Sie Neues Konto erstellen (Create a new account). 4. Geben Sie den neuen Benutzernamen ein. 5.
Benutzerkennwort erstellen So erstellen Sie ein Benutzerkennwort: Wählen Sie den Benutzer, für den Sie ein Kennwort erstellen möchten. 2. Wählen Sie Kennwort erstellen (Create a password). 3. Geben Sie ein Kennwort ein und bestätigen Sie es. Geben Sie ein Kennworthinweis ein. 4. Zum Fertigstellen klicken Sie auf Kennwort erstellen (Create password). Deutsch 1. ASUS CG Serie g6001_cg-series_manual_.
Antivirus-Software aktivieren Trend Micro Internet Security ist eine auf Ihren Computer vorinstallierte Antivirus-Software. Nach der Aktivierung können Sie es 60 Tage lang Probenutzen und eine lizenzierte Version erwerben, nachdem die Probezeit abgelaufen ist. 1. Führen Sie die Anwendung Trend Micro Internet Security aus. 2. Lesen Sie sorgfältig die Lizenzbedingungen (License terms). Klicken Sie auf Zustimmen & Aktivieren (Agree & Activate). 3. Geben Sie Ihre E-Mail-Adresse und Ihren Standort ein.
Deutsch ASUS CG Serie g6001_cg-series_manual_.
Kapitel 3 Anschließen von Geräten an Ihren Computer Anschließen eines USB-Datenträgers Dieser Desktop PC enthält USB 2.0/1.1-Anschlüsse auf der Vorder- sowie Rückseite. Die USB-Anschlüsse ermöglichen Ihnen das Anschließen von USB-Geräten wie z.B. USBDatenträger. So schließen Sie einen USB-Datenträger an: • Stecken Sie den USB-Datenträger in Ihren Computer ein. Vorderseite Rückseite So entfernen Sie einen USB-Datenträger: 1. Klicken Sie im Windows-Infobereich Ihres Computers auf und dann auf USB2.
Anschließen von Mikrofon und Lautsprechern Dieser Desktop PC enthält Mikrofon- und Lautsprecheranschlüsse auf der Vorder- sowie Rückseite. Die auf der Rückseite gelegenen Audio E/A-Anschlüsse ermöglichen Ihnen den Anschluss von 2-Kanal, 4-Kanal, 6-Kanal, and 8-Kanal Stereolautsprechern. Anschluss von Kopfhörern und Mikrofon Deutsch Anschluss von 2-Kanal Lautsprechern 3-2 g6001_cg-series_manual_.
Deutsch Anschluss von 4-Kanal Lautsprechern Anschluss von 6-Kanal Lautsprechern ASUS CG Serie g6001_cg-series_manual_.
Anschluss von 8-Kanal Lautsprechern Deutsch 3-4 g6001_cg-series_manual_.
Anschließen von mehreren externen Anzeigegeräten Ihr Desktop PC enthält VGA-, HDMI- und DVI-Anschlüsse/Ausgänge und ermöglicht Ihnen das Verbinden von mehreren externen Anzeigegeräten. Wenn eine Grafikkarte auf Ihren Computer installiert wurde, verbinden Sie die Anzeigegeräte mit den Anzeigeausgängen der Grafikkarte. Einrichten mehrerer Anzeigegeräte Deutsch Wenn Sie mehrere Monitore verwenden, können Sie die Anzeigemodi selbst bestimmen.
3. Schalten Sie den Computer ein. 4. Folgen Sei einer nachstehenden Vorgehensweisen, um das Einstellungsfenster Bildschirmauflösung (Screen Resolution) zu öffnen: • Klicken Sie auf > Systemsteuerung (Control Panel) > Darstellung und Anpassung (Appearance and Personalization) > Anzeige (Display) > Anzeigeeinstellungen ändern (Change display settings). Deutsch • Klicken Sie mit der rechten Maustaste irgendwo im Desktop.
Anschließen eines HDTV Verbinden Sie ein High Definition TV (HDTV) -Gerät mit dem HDMI-Anschluss Ihres Computers. • Sie müssen ein HDMI-Kabel verwenden, um das HDTV-gerät mit dem Computer zu verbinden. Das HDMI-Kabel ist NICHT im Lieferumfang enthalten. Deutsch • Um die beste Anzeigeleistung zu erzielen, vergewissern Sie sich, dass Ihr HDMI-Kabel nicht länger als 15 Meter ist. ASUS CG Serie g6001_cg-series_manual_.
Deutsch 3-8 g6001_cg-series_manual_.
Kapitel 4 Computer verwenden Richtige Sitzhaltung beim verwenden des Desktop PCs Beim Verwenden des Desktop PCs ist die Einhaltung der richtigen Sitzhaltung erforderlich, um Verspannungen Ihrer Handgelenke, Hände und anderer Gelenke oder Muskeln zu vermeiden. Dieser Abschnitt bietet Ihnen Tipps zum Vermeiden von physischen Beschwerden und möglichen Verletzungen beim Verwenden und Erfreuen Ihres Desktop PCs.
Speicherkartenleser verwenden Digitale Kameras und andere digitale Aufnahmegeräte verwenden Speicherkarten, um digitale Bilder oder Medien zu speichern. Der auf der Vorderseite Ihres Systems integrierte Speicherkartenleser ermöglicht das Lesen und Schreiben von und zu unterschiedlichen Speicherkarten. Deutsch 1 So verwenden Sie eine Speicherkarte: 1. Heben Sie die Abdeckung der E/A-Fronttafel an. 2. Stecken Sie eine Speicherkarte in den Kartensteckplatz.
Optisches Laufwerk verwenden 2 1 Deutsch 3 Optischen Datenträger einlegen So legen Sie einen optischen Datenträger ein: 1. Drücken Sie beim eingeschalteten System die Auswurftaste, um das Laufwerk zu öffnen. 2. Legen Sie den Datenträger in das Laufwerk, wobei die bedruckte Seite nach oben zeigt. 3. Drücken Sie auf das Laufwerksfach, um es zu schließen. 4. Wählen Sie im Fenster AutoPlay ein Programm, um auf die Dateien zuzugreifen.
Multimedia-Tastatur verwenden • Die Tastatur unterscheidet sich je nach Land. Die nachfolgende Abbildung ist nur zur Referenz gedacht. • Tastatur und Maus werden in manchen Regionen nicht mitgeliefert. ASUS SK-2045-Tastatur 6 7 8 9 10 11 12 13 14 15 16 17 Deutsch 18 1 2 19 ` 20 3 4 21 5 22 Tasten 1. 2. Beschreibung Startet Windows® Minianwendungen (Gadgets). Aktiviert Windows® Flip 3D. Tasten 12. 13. 3. Verkleinert die Bildgröße in Windows® Photo Viewer. 14. 4.
Deutsch ASUS-Razer Arctosa-Spieletastatur Tasten 1. 2. 3. 4. 5. 6. 7. 8. Beschreibung 1 2 3 4 5 6 Wiedergabe oder Pause im MediaPlayer. Stoppt die Wiedergabe im MediaPlayer Springt zum vorherigen Titel im MediaPlayer Springt zum nächsten Titel im MediaPlayer 8 7 Systemlautstärke verringern Systemlautstärke erhöhen Ton aus/ein Schaltet Profile um F1-F10 • Die Sonderfunktionstasten funktionieren nur unter den Windows® Vista / Windows® 7-Betriebssystemen.
BTC 6200C-Tastatur 1 2 3 4 5 6 7 8 9 10 11 12 13 ` Deutsch Tasten 1. 2. 3. 4. 5. 6. 7. Beschreibung In den Schlafmodus versetzen. drücken Sie eine beliebige Taste, um den Computer aufzuwecken und zum vorherigen Betriebsstatus zurückzukehren. Zurück zur vorherigen Seite. Vor zur nächsten Seite. Standard-Homepage im Windows® Internet Explorer öffnen. Favoritenordner im Windows® Internet Explorer öffnen. Standard-E-Mail-Programm starten. Tasten Beschreibung 8. Systemlautstärke erhöhen. 9. 10. 11.
Tasten 1. 2. 3. 4. 5. 6. Beschreibung 1 2 3 5 6 Deutsch ASUS PRIMAX/KB2621-Tastatur Systemlautstärke verringern. Ton aus/ein. Systemlautstärke erhöhen. Zurück zum vorherigen Titel im MediaPlayer. 4 Wiedergabe/Pause im Media-Player. Vor zum nächsten Titel im MediaPlayer. Die Sonderfunktionstasten funktionieren nur unter den Windows® Vista / 7Betriebssystemen. ASUS CG Serie g6001_cg-series_manual_.
Deutsch 4-8 g6001_cg-series_manual_.
Kapitel 5 Einrichten der Internetverbindung Kabelverbindung Für eine Verbindung zwischen Ihrem Computer und DSL-/Kabelmodem oder Lokalem Netzwerk (Local Area Network / LAN), verwenden Sie ein RJ-45-Kabel. Über DSL-/Kabelmodem verbinden So verbinden Sie via ein DSL-/Kabelmodem: 1. Richten Sie das DSL-/Kabelmodem ein. Beziehen Sie sich auf die Dokumentation, die mit Ihrem DSL-/Kabelmodem geliefert wurde. 2.
Über ein lokales Netzwerk (LAN) verbinden So verbinden Sie sich via LAN: 2. Verbinden Sie ein Ende des RJ-45-Kabels mit dem LAN (RJ-45)-Anschluss auf der Rückseite Ihres Computers und das andere Ende mit dem (Internet) LAN. Deutsch RJ-45 cable RJ-45-Kabel LAN LAN 3. Schalten sie den Computer ein. 4. Konfigurieren Sie die nötigen Einstellungen für die Internetverbindung. Für Details und Hilfestellung zur Einrichtung einer Internetverbindung wenden Sie sich an Ihren Internetdienstanbieter (ISP).
Kapitel 6 Verwenden der Hilfsprogramme Die Support-DVD und die Wiederherstellungs-DVD sind möglicherweise nicht im Lieferumfang enthalten. Sie können die Wiederherstellungspartitionsfunktion verwenden, um die Support-DVD und die Wiederherstellungs-DVD zu erstellen. Mehr Details finden Sie in System wiederherstellen in diesem Kapitel.
Tools-Menü Dieses Menü enthält die Panele für EPU, Probe II und Sensoraufzeichnung. Launching EPU Deutsch EPU ist eine energiesparende Anwendung, die verschiedenen Betriebsanforderungen nachkommen kann. Es erkennt die derzeitige Belastung und regelt die Stromversorgung intelligent in Echtzeit. Die Auswahl von Auto mode (Autom. Modus) lässt das System automatisch, dem aktuellen Systemstatus entsprechend, zwischen den Modi schalten.
Starten und konfigurieren von Probe II Das Programm PC Probe II überwacht die wichtigsten Komponenten des Computers und informiert Sie, falls Probleme entdeckt werden. PC Probe II erkennt unter anderem die Lüfterdrehzahlen, die CPU-Temperatur und Systemspannungen. Mit Hilfe dieses Programms werden optimale Betriebsbedingungen für Ihren Computer garantiert. So starten Sie Probe II: Klicken Sie in der AI Suite Hauptmenüleiste auf Tool > Probe II.
Starten und konfigurieren des Sensorschreibers Sensor Recorder (Sensorschreiber) ermöglicht die Überwachung und Aufzeichnung der Änderungen bei Systemspannungen, Temperaturen und Lüftergeschwindigkeiten. So starten Sie Sensor Recorder: • Klicken Sie in der AI Suite II Hauptmenüleiste auf Tool > Sensor Recorder.
Monitor-Menü Die Auswahl Monitor (Überwachung) enthält die Bereiche Sensor und CPU Frequency (CPU-Frequenz). Sensor starten Deutsch Der Bereich Sensor zeigt die aktuellen Werte eines Systemsensors an, einschließlich Lüfterdrehzahlen, CPU-Temperatur und Spannungen. So starten Sie Sensor: • Klicken Sie in der AI Suite II Hauptmenüleiste auf Monitor > Sensor. CPU Frequency starten Der Bereich CPU Frequency (CPU-Frequenz) zeigt die aktuelle CPU-Frequenz und CPUAuslastung an.
Update-Menü Die Auswahl Update (Aktualisierung) ermöglicht Ihnen, mit Hilfe der hauseigenen ASUS-Anwendungen, die Aktualisierung des Motherboard-BIOS und des BIOS-Bootlogos vorzunehmen. ASUS Update Deutsch Das Programm ASUS Update gestattet Ihnen, das Motherboard-BIOS in der Windows®Umgebung zu verwalten, speichern und aktualisieren.
Falls Sie das Boot-Logo, bzw. das während des Power-On-Self-Tests (POST) erscheinende Bild, ändern möchten, klicken Sie auf Yes (Ja). Ansonsten klicken Sie auf No (Nein), um fortzufahren. 5. Folgen Sie den Bildschirmanweisungen, um die Aktualisierung fertig zu stellen. Deutsch 4. BIOS über eine BIOS-Datei aktualisieren: 1. Wählen Sie in der Liste der Optionen Update BIOS from file (BIOS über eine BIOS-Datei aktualisieren) und drücken Sie auf Next (Weiter). 2.
Systeminformation Der Bereich System Information enthält Informationen über das Motherboard, die CPU und die Speichersteckplätze. Klicken Sie auf die Auswahl MB, um weitere Details über den MotherboardHersteller, den Produktnamen, die Version und das BIOS anzuzeigen. • Klicken Sie auf die Auswahl CPU, um weitere Details über den Prozessor und die Cache anzuzeigen.
Einstellungen Der Bereich Einstellungen ermöglicht es Ihnen die Einstellungen der Hauptmenüleiste und der Oberfläche zu konfigurieren. Hier können Sie die Anwendung auswählen, die Sie aktivieren wollen. • Hier können Sie die Leisteneinstellungen konfigurieren, • Hier können Sie das Aussehen der Oberfläche, z.B. Helligkeit, Kontrast, Farbsättigung, Farbton und Gamma einstellen. Deutsch • ASUS CG Serie g6001_cg-series_manual_.
ASUS AI Manager ASUS AI Manager ist ein Hilfsprogramm, welches Ihnen schnellen Zugriff auf oft verwendete Anwendungen ermöglicht. AI Manager installieren So installieren Sie AI Manager: 1. Legen Sie die Support-DVD in das optische Laufwerk. Die DVD zeigt automatisch das Treiber-Menü an, wenn Autorun auf Ihrem Computer aktiviert ist. Deutsch Falls Autorun deaktiviert ist, doppelklicken Sie die Datei setup.exe im Ordner ASUS AI Manager auf der Support-DVD. 2.
AI Manager Schnellstartleiste Die AI Manager Schnellstartleiste hält Ihren Desktopplatz frei und ermöglicht das einfache Starten von Hilfsprogrammen oder das Anzeigen von Systeminfos. Klicken Sie auf die Auswahl Hauptfenster (Main), Meine Favoriten (My Favorites), Support oder Information, um die Inhalte der entsprechenden Menüs anzuzeigen.
AI Security AI Security ermöglicht Ihnen Kennwörter für Geräte, wie z.B. USB-Laufwerk und CD/ DVD-Laufwerk, einzurichten, und sie vor fremdem Zugriff zu sichern. So sperren Sie ein Gerät: 1. Wenn Sie AI Security zum ersten Mal benutzen, geben Sie ein Kennwort ein, welches nicht mehr als 20 Buchstaben, Zahlen oder Zeichen enthält. Deutsch 2. Bestätigen Sie Ihr Kennwort. 3. Geben Sie einen Kennworthinweis ein (empfohlen). 4. Klicken Sie, wenn soweit, auf OK. 5.
Deutsch AI Booting Mit AI Booting können Sie die Boot-Gerätepriorität festlegen. So legen Sie die Boot-Sequenz fest: 1. Wählen Sie ein Gerät und klicken Sie dann auf die Tasten links/rechts, um die Boot-Reihenfolge festzulegen. 2. Klicken Sie, wenn soweit, auf Übernehmen (Apply). Meine Favoriten My Favorites (Meine Favoriten) ermöglicht Ihnen, Anwendungen die Sie öfter benutzen hinzuzufügen, um diese schneller zu finden. So fügen Sie eine Anwendung hinzu: 1.
Support Klicken Sie auf eine beliebigen Link im Support-Fenster, um zur ASUS-Webseite, der Webseite für technische Unterstützung oder zu den Kontaktinformationen zu gelangen. Deutsch Information Klicken Sie auf den Tab Information, um detaillierte Informationen über Ihr System, das Motherboard, die CPU, das BIOS, die installierten Geräte und den Speicher zu erhalten. 6-14 g6001_cg-series_manual_.
Nero 9 Deutsch Nero 9 ermöglicht Ihnen das Erstellen, Kopieren, Brennen, Bearbeiten, Freigeben und Aktualisieren von Daten verschiedenen Typs. Nero 9 installieren So installieren Sie Nero 9: 1. Legen Sie die Nero 9 DVD in das optisches Laufwerk ein. 2. Falls Autorun aktiviert ist, erscheint automatisch das Hauptmenü. Falls Autorun deaktiviert ist, doppelklicken Sie die Datei SeupX.exe im Hauptverzeichnis Ihrer Nero 9 DVD. 3. Klicken Sie im Hauptmenü auf Nero 9 Essentials.
Wählen Sie die gewünschte Sprache für den Installationsassistenten. Klicken Sie auf Weiter (Next). 5. Klicken Sie auf Weiter (Next), um fortzufahren. 6. Wählen Sie Ich akzeptiere die Lizenzbedingungen (I accept the License Conditions). Wenn soweit, klicken Sie auf Weiter (Next). Deutsch 4. 6-16 g6001_cg-series_manual_.
Wählen Sie Typisch (Typical) und klicken Sie dann auf Weiter (Next). 8. Wählen Sie Ja, ich möchte Anwendungsdaten anonym an Nero senden (Yes, I want to help by sending anonymous application data to Nero) und klicken Sie Weiter (Next). 9. Wenn abgeschlossen, klicken Sie auf Beenden (Exit). Deutsch 7. ASUS CG Serie g6001_cg-series_manual_.
Dateien brennen So brennen Sie Dateien: Klicken Sie im Hauptmenü auf Daten brennen (Data Burning) > Hinzufügen (Add). 2. Wählen Sie die Dateien, die Sie brennen möchten. Wenn soweit, klicken Sie auf Hinzufügen (Add). Deutsch 1. 6-18 g6001_cg-series_manual_.
Nachdem Sie die Dateien zum Brennen ausgewählet haben, klicken Sie auf Brennen (Burn), um die Dateien auf einen Datenträger zu brennen. Deutsch 3. Für weitere Details zur Verwendung von Nero 9, beziehen Sie sich auf die Nero Webseite unter www.nero.com Systemwiederherstellung Verwenden der Wiederherstellungspartition Die Wiederherstellungspartition versetzt die Software Ihres Desktop PCs schnell in ihren originalen Betriebszustand zurück.
3. Wählen Sie eine der folgenden Wiederherstellungsoptionen. Systemwiederherstellung (System Recovery): Diese Funktion stellt die Werkseinstellungen wieder her. Systemabbildsicherung (System Image Backup): Diese Funktion ermöglicht das Brennen von Systemabbildern auf DVDs, um das System später auf seine Standardeinstellungen wiederherzustellen. System DVD-Sicherung (System DVD Backup): Diese Funktion erstellt eine Sicherungskopie der Support-DVD. Deutsch 4.
Kapitel 7 Problembehandlung Problembehandlung Diese Kapitel stellt einige Probleme vor, mit denen Sie konfrontiert werden könnten und bietet einige Lösungsansätze. ? ? Mein Computer kann nicht eingeschaltet werden und die Betriebs-LED auf der Vorderseite leuchtet nicht. • Prüfen Sie, ob Ihr Computer richtig angeschlossen ist. • Prüfen Sie, ob die (Strom)Steckdose betriebsbereit ist. • Prüfen Sie, ob das Netzteil eingeschaltet ist.
? Deutsch ? ? ? Keine Anzeige auf dem Monotor. • Prüfen Sie, ob der Monitor eingeschaltet ist. • Prüfen Sie, ob der Monitor richtig mit dem Videoausgang Ihres Computers verbunden ist. • Falls Ihr Computer eine aufgesetzte Grafikkarte aufweist, sollten Sie den Monitor mit dem Videoausgang der aufgesetzten Karte verbinden. • Prüfen Sie, dass keine Pole am Videostecker verbogen sind. Falls Sie verbogene Pole entdecken, ersetzen Sie das Videoverbindungskabel für den Monitor.
? Das HDTV-Bild ist gestreckt. • Dies wird durch unterschiedliche Auflösungen Ihres Monitors und HDTVs verursacht. Passen Sie die Bildschirmauflösung Ihres HDTVs an. So ändern Sie die Bildschirmauflösung: 1.
Stromversorgung Problem Deutsch Mögliche Ursachen Maßnahmen Falsche Betriebsspannung. • P assen Sie den Betriebsspannungsschalter Ihres Computers je nach den Anforderungen Ihrer Region an. • Passen Sie die Spannungseinstellungen an. Vergessen Sie nicht, den Stromkabel aus der Steckdose zu ziehen. Ihr Computer ist nicht eingeschaltet. Drücken Sie den Einschaltknopf auf der Vorderseite Ihres Computers, um ihn einzuschalten. Das Stromkabel Ihres Computers ist nicht richtig angeschlossen.
Problem Kein Internet Mögliche Ursachen Maßnahmen Das LAN-Kabel ist nicht angeschlossen. Verbinden Sie das LAN-Kabel mit Ihrem Computer. Probleme mit dem LANKabel. Die LAN LED sollte an sein, Andernfalls probieren Sie ein anderes LAN-Kabel. Falls das Problem weiter besteht, kontaktieren Sie den ASUS Kundendienst. Ihr Computer ist nicht sachgemäß mit den Router oder Hup verbunden. Stellen Sie sicher, dass Ihr Computer sachgemäß mit den Router oder Hub verbunden ist.
System Problem Systemgeschwindigkeit zu gering. Maßnahmen Es werden zu viele Programme ausgeführt. Schließen Sie einige Programme. Computervirusattacke • V erwenden Sie ein Antivirusprogramm, um Ihren Computer nach Viren zu prüfen und zu reparieren. • Reinstallieren Sie das Betriebssystem Betriebsausfall des Festplattenlaufwerks. • Senden Sie das beschädigte Festplattenlaufwerk zur reparatur an den ASUS Kundendienst. • Ersetzen Sie es durch ein neues Festplattenlaufwerk.
Problem Hoher Geräuschpegel nach Computerstart. Hoher Geräuschpegel beim Computerbetrieb. Mögliche Ursachen Maßnahmen Ihr Computer wird hochgefahren. Dies ist Normal. Beim Computerstart läuft der Lüfter mit voller Geschwindigkeit. Der Lüfter verlangsamt sich, nachdem das Betriebssystem geladen wurde. Die BIOS-Einstellungen haben sich geändert. Stellen Sie die BIOS-Standardeinstellungen wieder her. Alte BIOS-Version. Aktualisieren Sie das BIOS zur neuesten Version.
Deutsch 7-8 g6001_cg-series_manual_.
Ordinateur de bureau ASUS Essentio CG8250 Manuel de l’utilisateur Book 1.
F6196 Première édition Novembre 2010 Français Copyright © 2009 ASUSTeK COMPUTER INC. Tous droits réservés.
Table des matières Notes ............................................................................................................v Consignes de sécurité................................................................................... vii Conventions utilisées dans ce manuel......................................................... viii Où trouver plus d’informations...................................................................... viii Contenu de la boîte...........................................
Table des matières Chapitre 6 Utiliser les utilitaires ASUS AI Suite II........................................................................................... 6-1 ASUS AI Manager...................................................................................... 6-10 Nero 9 ...................................................................................................... 6-15 Restaurer le système.................................................................................
Notes REACH Conforme avec le Règlement REACH (Enregistrement, Évaluation, Autorisation et Restriction des produits chimiques), nous avons publié la liste des substances chimiques utilisées dans nos produits sur le site Web ASUS REACH à l’adresse http://green.asus.com/english/ REACH.htm. Rapport de la Commission Fédérale des Communications Ce dispositif est conforme à l’alinéa 15 des règles établies par la FCC.
Avertissement concernant l’exposition aux RF Cet équipement doit être installé et opéré conformément aux instructions fournies et l’antenne utilisée par cet émetteur doit être installée de sorte à garantir une distance de séparation d’au moins 20 cm entre l’antenne et l’utilisateur, et ne doit pas être colocalisée ou opérée conjointement avec d’autres antennes ou émetteurs.
Consignes de sécurité Déconnectez le cordon d’alimentation et tous les périphériques avant tout entretien. Nettoyez l’ordinateur portable avec une éponge en cellulose propre ou un chiffon en peau de chamois humide et une solution détergeante non abrasive et quelques gouttes d’eau tiède puis nettoyez les surfaces humides ‘à l’aide d’un chiffon sec. • • • • • • • • • • • • NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé.
Conventions utilisées dans ce manuel Pour être sûr que vous effectuiez certaines tâches correctement, veuillez prendre notes des symboles suivants. DANGER/AVERTISSEMENT: Ces informations vous permettront d’éviter de vous blesser lors de la réalisation d’une tâche. ATTENTION : Informations destinées à éviter d’endommager le matériel lors d’une tâche. IMPORTANT : Instructions que vous devez suivre pour terminer une tâche.
Contenu de la boîte Clavier x1 Souris x1 Cordon d’alimentation x1 DVD de support x1 DVD de restauration x1 Français Ordinateur de bureau ASUS Essentio Installation Guide Logiciel de gravure de DVD Nero 9 x1 Guide d’installation x1 Carte de garantie x1 • Si l’un des éléments est endommagé ou manquant, contactez votre revendeur. • Les illustrations ci-dessus sont données à titre indicatif. Les spécifications du produit peuvent varier en fonction des modèles.
Book 1.
Chapitre�� 1 Démarrer Bienvenue ! Merci pour votre achat d’un ordinateur de bureau ASUS Essentio CG8250 ! Les séries d’ordinateurs de bureau ASUS Essentio CG8250 offrent des performances à la pointe de l’industrie, une fiabilité sans faille et des utilitaires variés et conviviaux. Le tout dans un boîtier au style futuriste et stylisé. Lisez la carte de garantie ASUS avant de configurer votre ordinateur de bureau ASUS.
Français 1. Bouton d’alimentation. Appuyez sur ce bouton pour allumer l’ordinateur. 2. Fente pour carte Secure Digital™ / MultiMediaCard. Insérez une carte mémoire Secure Digital™ ou MultiMediaCard dans cette fente. 3. Fente pour carte CompactFlash® / Microdrive™. Insérez une carte mémoire CompactFlash® / Microdrive™ dans cette fente. 4. Memory Stick™ / Memory Stick Pro™ card slot. Insérez une carte mémoire Memory Stick™ / Memory Stick Pro™ dans cette fente. 5.
1. Connecteur d’alimentation. Branchez le cordon d’alimentation sur ce connecteur. 2. Interrupteur d’alimentation. Déplacez cet interrupteur pour alimenter ou non l’ordinateur en courant électrique. 3. B����������������� ouches d’aération. Ces ouvertures du châssis permettent la ventilation de l’air. NE PAS couvrir les bouches d’aération du châssis afin de garantir la bonne ventilation de votre ordinateur 4. Port 2-en-1 souris + clavier PS/2 (mauve/vert).
13. ������������������������������������������������� Port de sortie pour haut-parleurs latéraux (gris). Ce port permet de connecter les haut-parleurs latéraux d’un système d’enceintes 8 canaux. 14. ������������������������������������������������� Port de sortie pour haut-parleurs arrières (noir). Ce port permet de connecter les haut-parleurs arrières d’un système d’enceintes 4, 6 et 8 canaux. 15.
Configurer votre ordinateur Cette section vous offre des informations sur la connexion des composants principaux de l’ordinateur tels que le moniteur, le clavier, la souris et le cordon d’alimentation. Connecter un moniteur externe Utiliser la carte graphique ASUS (disponible sur une sélection de modèles) Pour connecter un moniteur externe à la carte graphique ASUS : 1. Connectez votre moniteur à l’un des ports d’affichage de la carte graphique ASUS. 2. Connectez le moniteur à une source d’alimentation.
Utiliser les ports d’affichage de la carte mère Pour connecter un moniteur externe à l’un des ports d’affichage de la carte mère : 1. Connectez un moniteur VGA au port VGA, ou un moniteur DVI-D au port DVI-D, ou un moniteur HDMI au port HDMI localisé à l’arrière de votre ordinateur. 2. Connectez le moniteur à une source d’alimentation. Français • Si votre ordinateur est accompagné d’une carte graphique, celle-ci est définie par défaut comme source d’affichage primaire dans le BIOS.
Connecter un clavier et une souris USB Français Connectez un clavier et/ou une souris USB aux ports USB situés à l’arrière de votre ordinateur. Connecter le cordon d’alimentation Connectez une extrémité du cordon d’alimentation au connecteur d’alimentation situé à l’arrière de votre ordinateur et l’autre extrémité à une prise électrique. ASUS Essentio CG8250 Book 1.
Allumer ou éteindre l’ordinateur Cette section décrit comment éteindre ou allumer votre ordinateur. Allumer votre ordinateur Pour allumer votre ordinateur : 1. Allumez le moniteur. 2. Placez l’ordinateur sous tension en mettant l’interrupteur d’alimentation sur la position “I”, puis appuyez sur le bouton d’alimentation pour mettre en route l’ordinateur. Bouton d’alimentation Sous tension Hors tension Français 3. Patientez le temps que le système d’exploitation se charge automatiquement.
Chapitre 2 Utiliser Windows® 7 Démarrer pour la première fois Lorsque vous démarrez votre ordinateur pour la première fois, une série d’écrans apparaissent pour vous guider dans la configuration des paramètres de base du système d’exploitation Windows® 7. Pour démarrer pour la première fois : 1. Allumez votre ordinateur. Patientez quelques minutes jusqu’à ce que l’écran Configurer Windows apparaisse. 2. Dans le menu déroulant, sélectionnez votre langue. Cliquez sur Suivant. 3.
Utiliser le Bureau de Windows® 7 Cliquez sur l’icône Démarrer Windows® 7. > Aide et support pour obtenir plus d’informations sur Menu Démarrer Français Barre des tâches Zone de notification Utiliser le menu Démarrer Le menu Démarrer vous donne accès aux programmes, utilitaires et autres outils utiles pour votre ordinateur. Il permet également d’obtenir plus d’informations sur Windows 7 par le biais de la fonctionnalité Aide et support.
Utiliser l’élément Mise en route La fonctionnalité Mise en route du menu Démarrer contient des informations sur les tâches de base comme la personnalisation de Windows®, l’ajout de nouveaux utilisateurs et le transfert de fichiers pour vous aider à vous familiariser avec Windows® 7. Pour utiliser la fonctionnalité Mise en route : 1. Dans la barre des tâches de Windows®, cliquez sur l’icône Démarrer le menu Démarrer. pour ouvrir 2. Sélectionnez Mise en route. La liste des tâches disponibles apparaît.
Épingler des éléments dans la liste des liens Lorsque vous faites un clic droit sur une icône de la barre des tâches, une liste apparaît pour offrir un accès rapide à certains liens des programmes ou éléments. Vous pouvez épingler divers éléments dans la liste de liens comme la liste de vos sites Web favoris, les dossiers fréquemment utilisés ou vos fichiers multimédia préférés. Pour épingler des éléments à la liste de liens : 1. Dans la barre des tâches, faites un clic droit sur une icône. 2.
Détacher des programmes du menu Démarrer Pour détacher des programmes du menu Démarrer : 1. Dans la barre des tâches de Windows®, cliquez sur l’icône Démarrer menu Démarrer. pour ouvrir le 2. Dans le menu Démarrer, faites un clic droit sur le programme à détacher, puis sélectionnez Supprimer de cette liste.
Personnaliser les icônes et les notifications Vous pouvez choisir d’afficher ou de masquer les icônes et les notifications de la barre des tâches ou de la zone de notification. Pour personnaliser les icônes et les notifications : 1. Dans la zone de notification, cliquez sur l’icône . 2. Cliquez sur Personnaliser. 3. Dans le menu déroulant, sélectionnez le comportement de chaque icône ou élément. Français 2-6 Book 1.
Gérer vos fichiers et vos dossiers Utiliser Windows® Explorer Windows® Explorer vous permet de visualiser, gérer et organiser vos fichiers et dossiers. Lancer Windows® Explorer Pour démarrer Windows Explorer : 1. Dans la barre des tâches de Windows, cliquez sur l’icône Démarrer menu Démarrer. 2. Cliquez sur Ordinateur pour lancer Windows Explorer.
Personnaliser l’affiche des fichiers/dossiers Pour personnaliser l’affichage de vos fichiers/dossiers : 1. Lancez Windows Explorer. 2. Localisez vos données à partir du volet de navigation. 3. Dans la barre d’outils, cliquez sur l’icône Affichage 4. Dans le menu Affichage, déplacez le curseur pour sélectionner le mode d’affichage à utiliser. . Vous pouvez aussi cliquer n’importe où sur le volet d’affichage, cliquer sur Affichage, et sélectionner le type d’affichage désiré.
Trier vos fichiers Pour trier vos fichiers : 1. Lancez Windows Explorer. 2. Faites un clic droit n’importe où sur le volet d’affichage. 3. Dans le menu contextuel apparaissant à l’écran, sélectionnez Trier par, puis sélectionnez la méthode de tri désirée. Grouper vos fichiers 1. Lancez Windows Explorer. 2. Faites un clic droit n’importe où sur le volet d’affichage. 3. Dans le menu contextuel apparaissant à l’écran, sélectionnez Regrouper par, puis sélectionnez la méthode de groupage désirée.
Sauvegarder vos fichiers Configurer une sauvegarde Pour configurer une sauvegarde : > Tous les programmes > Maintenance > Sauvegarder et restaurer. Français 1. Cliquez sur 2. Cliquez sur Configurer la sauvegarde. Cliquez sur Suivant. 3. Sélectionnez l’emplacement de sauvegarde. Cliquez sur Suivant. 4. Sélectionnez Laissez Windows choisir (recommandé) ou Me laisser choisir comme mode de sauvegarde.
Protéger votre ordinateur Utiliser le Centre de maintenance de Windows® 7 Dans le Centre de maintenance de Windows® 7 vous pourrez trouver des messages d’alerte, des informations sur la sécurité et la maintenance du système et la possibilité de dépanner automatiquement certains problèmes ordinaires de l’ordinateur. Vous pouvez personnaliser les notifications. Pour plus de détails, référez-vous à la section Personnaliser les icônes et les notifications de ce chapitre.
Utiliser Windows® Update Windows Update vous permet de vérifier et installer les dernières mises à jour pour améliorer la sécurité et les performances de votre ordinateur. Lancer Windows® Update Pour ouvrir Windows® Update : 1. Dans la barre des tâches de Windows®, cliquez sur l’icône Démarrer menu Démarrer. 2. Sélectionnez Tous les rogrammes > Windows Update. 3. À partir de l’écran de Windows Update, sélectionnez la tâche à effectuer. pour ouvrir le Français 2-12 Book 1.
Configurer un compte d’utilisateur et mot de passe Vous pouvez créer des comptes d’utilisateurs et mot de passe pour les personnes utilisant l’ordinateur. Configurer un compte d’utilisateur Pour configurer un compte d’utilisateur : > Mise en route > Ajouter de Dans la barre des tâches de Windows®, cliquez sur nouveaux utilisateurs à mon ordinateur. 2. Sélectionnez Gérer un autre compte. 3. Sélectionnez Créer un nouveau compte. 4. Spécifiez le nom du nouvel utilisateur. 5.
Définir un mot de passe utilisateur Pour configurer un mot de passe utilisateur : Français 1. Sélectionnez l’utilisateur pour lequel vous souhaitez définir un mot de passe. 2. Sélectionnez Créer un mot de passe. 3. Entrez le mot de passe et confirmez-le. Définissez un indice de mot de passe. 4. Un fois terminé, cliquez sur Créer un mot de passe. 2-14 Book 1.
Activer le logiciel anti-virus Trend Micro Internet Security est un logiciel anti-virus pré-installé sur votre ordinateur. Après l’avoir activé, vous bénéficierez d’une période d’essai de 60 jours avant que le logiciel n’expire. L’achat d’une clé de licence est nécessaire une fois la période d’essai terminée. Pour activer Trend Micro Internet Security : 1. Exécutez l’application Trend Micro Internet Security. 2. Lisez attentivement les termes de la licence. Cliquez sur Agree & Activate. 3.
Français 2-16 Book 1.
Chapitre 3 Connecter des périphériques Connecter un périphérique de stockage USB Cet ordinateur de bureau dispose de ports USB 2.0/1.1 sur les panneaux avant et arrière. Les ports USB vous permettent de connecter des périphériques USB tels que des dispositifs de stockage. Pour connecter un périphérique de stockage USB : • Insérez le périphérique de stockage USB sur l’un des ports USB de votre ordinateur. Panneau avant Panneau arrière Pour retirer le périphérique de stockage USB : 1.
Connecter un microphone ou un système de haut-parleurs Cet ordinateur de bureau intègre un port micro et plusieurs ports audio localisés sur le panneau avant et arrière. Les ports audio situés à l’arrière de l’ordinateur permettent de configurer un système de haut-parleurs à 2, 4; 6 ou 8 canaux. Connecter un casque audio ou un micro Français Connecter un système de haut-parleurs 2.0 3-2 Book 1.
Français Connecter un système de haut-parleurs 4.1 Connecter un système de haut-parleurs 6.1 ASUS Essentio CG8250 Book 1.
Connecter un système de haut-parleurs 8.1 Français 3-4 Book 1.
Connecter plusieurs périphériques d’affichage Votre ordinateur de bureau dispose de ports VGA, HDMI, et DVI vous permettant de connecter plusieurs périphériques d’affichage. Lorsqu’une carte graphique est installée sur votre ordinateur, connectez les moniteurs sur les ports de sortie intégrés à la carte graphique. Configurer plusieurs affichages Lors de l’utilisation de plusieurs moniteurs, vous pouvez définir le mode d’affichage.
3. Allumez votre ordinateur. 4. Suivez l’une des méthodes suivantes pour ouvrir l’écran Résolution d’écran : • Cliquez sur > Panneau de configuration > Apparence et personnalisation > Affichage > Modifier les paramètres d’affichage. • Faites un clic droit n’importe où sur le Bureau de Windows. Dans le menu contextuel, cliquez sur Personnaliser > Affichage > Modifier les paramètres d’affichage. 5. Sélectionnez un mode d’affichage dans le menu déroulant Affichages multiples.
Connecter un téléviseur HD Reliez votre ordinateur à un téléviseur Haute Définition (HDTV) par le biais du port HDMI. • Vous devez faire l’achat d’un câble HDMI pour connecter un téléviseur HD à votre ordinateur. Le câble HDMi est vendu séparément. Français • Pour obtenir une qualité d’image optimale, utilisez un câble HDMI d’une longueur inférieure à 15 mètres. ASUS Essentio CG8250 Book 1.
Français 3-8 Book 1.
Chapitre 4 Utiliser votre ordinateur Posture recommandée lors de l’utilisation de l’ordinateur Lorsque vous utilisez votre ordinateur de bureau, maintenir une posture adéquate est nécessaire afin d’éviter de fatiguer vos poignets, vos mains et autres articulations ou muscles. Cette section offre des astuces permettant d’éviter les éventuelles gênes physiques ou les blessures pouvant résulter de l’utilisation de votre ordinateur de bureau.
Utiliser le lecteur de carte mémoire Les appareils photos numériques et autres équipements d’imagerie numérique utilisent des cartes mémoire pour stocker des photos numériques ou des fichiers multimédia. Le lecteur de carte mémoire intégré en façade de votre ordinateur permet la lecture et l’écriture de données sur une variété de formats de cartes mémoire. 1 Français Pour utiliser une carte mémoire : 1. Soulevez le capot situé en façade. 2.
Utiliser le lecteur optique 2 1 3 Insérer un disque optique 1. Lorsque votre ordinateur est allumé, appuyez sur le bouton d’éjection pour ouvrir le plateau du lecteur optique. 2. Placez le disque sur le plateau avec la face imprimée tournée vers le haut. 3. Poussez légèrement le plateau pour le refermer. 4. Sélectionnez l’action à effectuer lors de l’apparition de la fenêtre d’Exécution automatique pour accéder à vos fichiers.
Utiliser le clavier multimédia (sur une sélection de modèles) Le clavier varie en fonction des pays de commercialisation. Les illustrations ci-dessous sont données à titre indicatif. Clavier ASUS SK-2045 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 19 ` 20 3 4 21 5 22 Français Touches Description Touches 1. 12. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Lance les Gadgets Windows®. Active la Rotation 3D Windows®. Réduit la taille des photos ouvertes avec la Visionneuse de photos Windows®. 13. 14.
Touches 1. 2. 3. 4. 5. 6. 7. 8. Description 1 2 3 4 5 Français Clavier de jeu ASUS-Razer Arctosa 6 Lecture ou pause d’un fichier multimédia Arrêt de la lecture d’un fichier multimédia Piste précédente 8 7 Piste suivante Volume Volume + Active/désactive le son Changement de profil via les touches F1 ~ F10. • Les touches de fonction spéciales ne fonctionnent que sous Windows® XP / Vista / 7. • Installez le pilote du clavier avant de l’utiliser. Visitez le site Web Razer sur www.razersupport.
Clavier BTC 6200C 1 2 3 4 5 6 7 8 9 10 11 12 13 ` Français Touches Description Touches Description 1. 8. 2. 3. 4. 5. 6. 7. Bascule en mode veille. Appuyez sur une touche quelconque pour sortir l’ordinateur du mode veille. Retourne à la page précédente. Retourne à la page suivante. Ouvre la page d’acceuil par défaut de Windows® Internet Explorer. Ouvre le dossier des favoris de Windows® Internet Explorer. Ouvre le client de messagerie électronique par défaut. Volume - 9. 10. 11. 12. 13.
Clavier ASUS PRIMAX/KB2621 1. 2. 3. 4. 5. 6. Description 1 Volume - Active/désactive le son. Français Touches Volume + Piste précédente. 4 Lecture ou pause d’un fichier multimédia. Piste suivante. Les touches de fonction spéciales fonctionnent sous�������� Windows® Vista / Windows® 7. ASUS Essentio CG8250 Book 1.
Français 4-8 Book 1.
Chapitre 5 Se connecter à Internet Connexion filaire Utilisez un câble RJ-45 pour connecter votre ordinateur à un modem câble/ADSL ou à un réseau local. Connexion via un modem câble/ADSL Pour vous connecter via un modem câble/ADSL : 1. Configurer votre modem câble/ADSL. Pour plus de détails, reportez-vous à la documentation accompagnant votre modem câble/ADSL. 2.
Connexion via un réseau local Pour vous connecter à un réseau local : 1. Connectez une extrémité du câble RJ-45 au port réseau (RJ-45) situé à l’arrière de votre ordinateur et l’autre extrémité au hub réseau de votre réseau local. Français Réseau LAN local Câble RJ-45 RJ-45 cable 2. Allumez votre ordinateur. 3. Configurez les paramètres de connexion Internet appropriés. Contactez votre administrateur réseau pour toute assistance ou détails sur la configuration de votre connexion Internet.
Chapitre 6 Utiliser les utilitaires Le DVD de support et le DVD de restauration peuvent ne pas être inclus dans la boîte de votre ordinateur. Vous pouvez utiliser la partition de restauration pour créer un DVD de support et de restauration. Pour plus de détails, référez-vous à la section Restaurer le système de ce chapitre. ASUS AI Suite II ASUS AI Suite II est une interface tout-en-un intégrant divers utilitaires ASUS pouvant être exécutés simultanément.
Menu des utilitaires Le menu Tool (Outils) intègre les fonctions EPU, Probe II, et Sensor Recorder. Lancer EPU EPU est un outil de gestion de l’alimentation efficace répondant à différent besoins. Cet utilitaire propose différents modes permettant de réaliser des économies d’énergie. Sélectionner Auto fait basculer automatiquement le système d’un mode à un autre en fonction de l’état actuel du système.
Lancer et configurer Probe II Probe II est un utilitaire qui contrôle l’activité des composants cruciaux de l’ordinateur ; il détecte et vous avertit de tout problème survenant sur l’un de ces composants. PC Probe II surveille entre autres la vitesse de rotation des ventilateurs, la température du CPU, et les voltages du système. Grâce à cet utilitaire, vous serez assuré que votre ordinateur fonctionne dans des conditions d’opération saines.
Lancer et configurer Sensor Recorder Sensor Recorder ������������������������������������������������������������������������ vous permet de surveiller les changements intervenus dans votre système tels que la température, le voltage et la vitesse de rotation des ventilateurs. Vous pouvez aussi visualiser un historique des évènements. Pour lancer Sensor Recorder : • Cliquez sur� Tool (Outils) > Sensor Recorder à ������������������������������������ partir de la barre des menus d’AI Suite II.
Menu de surveillance Le menu Monitor (Surveillance) permet ���������� de visionner la liste des sondes de surveillance et l’état de la fréquence du CPU. Sensor (Sondes) Le panneau Sensor permet de visionner la liste des sondes surveillant la vitesse de rotation des ventilateurs, la température du CPU et les tensions. Pour ouvrir le panneau de surveillance : • ������������ Cliquez sur Monitor (Surveillance) > Sensor (Sondes) à partir de la barre des menus d’AI Suite II pour afficher ce panneau.
Menu de mise à jour du BIOS Le menu Update (Mise à jour) permet de mettre à jour le BIOS et le logo de démarrage de la carte mère. ASUS Update ASUS Update est un utilitaire vous permettant de gérer, sauvegarder et mettre à jour le BIOS de la carte mère sous Windows®.
4. Cliquez sur Yes (Oui) si vous souhaitez modifier le logo de démarrage du BIOS, soit l’image apparaissant lors du POST (PowerOn Self-Tests). Cliquez sur No (Non) pour continuer. 5. Suivez les instructions apparaissant à l’écran pour compléter la mise à jour. Mise à jour à partir d’un fichier BIOS Dans la liste des options, sélectionnez Update BIOS from file (Mettre à jour le BIOS à partir d’un fichier BIOS) puis cliquez sur Next (Suivant). 2.
Menu d’informations du système Le menu System Information (Infos système) affiche des informations concernant la carte mère, au CPU et aux modules mémoire. • ��������������������� Cliquez sur l’onglet MB (Carte mère) pour afficher les détails sur la fabricant de la carte mère, le nom du produit, la version et le BIOS. Français • ��������������������� Cliquez sur l’onglet CPU pour visualiser les informations relatives au processeur et à la mémoire cache.
Menu des réglages • Application Permet de sélectionner l’application à activer. • Bar (Barre) Permet de modifier les paramètres de la barre. • Skin (Apparence) Permet de personnaliser le contraste, la luminosité, la saturation, la teinte et la correction gamma de l’interface. ASUS Essentio CG8250 Book 1.indb 9 Français Cliquez sur Settings (Paramètres) pour personnaliser les options de la barre des menus.
ASUS AI Manager ASUS AI Manager est un utilitaire offrant un accès rapide et aisé aux applications les plus fréquemment utilisées. Installer AI Manager Pour installer AI Manager : 1. Placez le DVD de support dans votre lecteur optique. Si l'Exécution automatique est activée, l'assistant d'installation des pilotes apparaît. Si l’Exécution automatique est désactivée sur votre ordinateur, localisez le fichier setup.exe contenu dans le dossier ASUS AI Manager du DVD de support. 2.
Barre de lancement rapide La barre de lancement rapide de AI Manager permet de gagner de l’espace à l’écran, lancer les utilitaires ASUS ou afficher les informations système en toute simplicité. Cliquez sur l’onglet Principal, Mes favoris, Support ou Informations pour en afficher le contenu. Fermer Basculer en mode complet Réduire Princicpal Mes favoris Support Informations Cliquez sur le bouton pour basculer entre la barre de lancement rapide et la fenêtre complète.
AI Security AI Security permet de définir un mot de passe destiné à sécuriser vos périphériques (disque flash USB / CD/DVD) et ainsi empêcher les accès non autorisés. Pour verrouiller un périphérique : ������������������������������������������������������������������������������������ 1. Lors de la première utilisation de AI Security, la saisie d’un mot de passe est demandée. Entrez un mot de passe composé d’un maximum de 20 caractères alphanumériques. Confirmez le mot de passe. 3.
AI Booting AI Booting permet de spécifier la séquence de démarrage de vos périphériques. 1. Sélectionnez un périphérique, puis cliquez sur les boutons gauche/droite pour spécifier la séquence de démarrage. 2. Une fois terminé, appuyez sur Appliquer. Français Pour spécifier la séquence de démarrage : Mes favoris Mes favoris vous permet d’ajouter à la liste de vos favoris les applications que vous utilisez le plus fréquemment afin d’en faciliter l’accès. Pour ajouter une application: 1.
Support Cliquez sur l’un des liens de la fenêtre Support pour accéder à l’un des sites Web d’ASUS (site Web international, site Web d’assistance en ligne, site de téléchargement, et informations de contact). Français Informations Cliquez sur l’un des onglets de la fenêtre Informations pour afficher des informations détaillées sur votre ordinateur (système, carte mère, CPU, BIOS, périphériques installés, et modules mémoire). 6-14 Book 1.
Nero 9 Nero 9 vous permet de créer, copier, graver, éditer, partager et mettre à jour différents types de données. Français Installer Nero 9 Pour installer Nero 9 : 1. Insérez le DVD de Nero 9 DVD dans votre lecteur optique. 2. Si l’Exécution automatique est activée, le menu principal apparaît automatiquement à l’écran. Si l’Exécution automatique est désactivée sur votre ordinateur, localisez le fichier SeupX.exe contenu dans le répertoire principal du DVD de Nero 9. 3.
Sélectionnez la langue de l’assistant d’installation. Cliquez sur Suivant. 5. Cliquez sur Suivant pour continuer. 6. Cochez la case J’accepte les conditions du contrat de licence. Une fois terminé, cliquez sur Suivant. Français 4. 6-16 Book 1.
Sélectionnez Normale puis cliquez sur Suivant. 8. Cochez la case Oui, je veux aider en envoyant des données d’applications anonymes à Nero puis cliquez sur Suivant. 9. Une fois terminé, cliquez sur Quitter. Français 7. ASUS Essentio CG8250 Book 1.
Graver des fichiers Pour graver des fichiers : Français 1. À partir du menu principal, cliquez sur Gravure de données > Ajouter. 2. Sélectionnez les fichiers à graver. Une fois terminé, cliquez sur Ajouter. 6-18 Book 1.
3. Après avoir sélectionné les fichiers à graver, cliquez sur Graver pour lancer la gravure des fichiers sur un disque. Français Pour plus de détails sur l’utilisation de Nero 9, référez-vous au site Web de Nero sur www.nero.com Restaurer le système Utiliser la partition de restauration La partition de restauration permet de restaurer les logiciels de votre ordinateur à leur état de fonctionnement initiale.
3. Sélectionnez l’une des méthodes de restauration suivantes. System Recovery: Cette option permet de restaurer le système dans sa configuration d’usine. System Image Backup: Cette option vous permet de graver une image du système d’exploitation sur un DVD, pour une restauration future du système dans sa configuration d’usine. System DVD Backup: Cette option permet de créer une copie de sauvegarde du DVD de support. 4. Suivez les instructions à l’écran pour terminer la procédure de restauration.
Chapitre 7 Dépannage Dépannage Ce chapitre présente les problèmes éventuels et leurs solutions que vous serez peut être amené à rencontrer lors de l’utilisation de votre ordinateur. ? ? Mon ordinateur ne s’allume pas et le voyant LED d’alimentation du panneau avant reste éteint • Vérifiez que tous les câbles de l’ordinateur sont correctement connectés. • Vérifiez que votre prise électrique murale fonctionne correctement.
? ? Français ? ? Aucun contenu affiché sur le moniteur. • Vérifiez que le moniteur est bien allumé. • Assurez-vous que votre moniteur est correctement connecté au port de sortie vidéo de votre ordinateur. • Si votre ordinateur intègre une carte graphique, assurez-vous que votre moniteur est correctement connecté au port de sortie vidéo de la carte. • Vérifiez que les broches du connecteur vidéo du moniteur ne sont pas pliées. Si c’est le cas, remplacez le câble vidéo du moniteur.
? L’image sur mon téléviseur HD déborde de l’écran. • Ce problème est causé par les différentes résolutions prises en charge par votre moniteur et votre téléviseur HD. Ajustez le résolution d’écran de sorte à ce que la totalité du contenu s’affiche correctement. Pour modifier la résolution de votre écran : 1.
Alimentation Problème Pas d’alimentation (l’indicateur d’alimentation est éteint) Raison possible Action Voltage incorrect • P lacez l’interrupteur d’alimentation sur le type de voltage supporté dans votre pays/région. • Ajustez les paramètres de voltage. Assurez-vous que le cordon d’alimentation n’est pas raccordé à une prise électrique. L’ordinateur n’est pas allumé Appuyez sur le bouton de mise en route situé à l’avant du châssis.
Réseau Impossible d’accéder à Internet Raison possible Action Problème de câble réseau Assurez-vous que le voyant réseau est allumé. Si ce n’est pas le cas, utilisez un autre câble. Si le problème persiste, contactez le service après vente d’ASUS. L’ordinateur n’est pas correctement connecté à un routeur ou hub réseau Assurez-vous que votre ordinateur est correctement raccordé à un routeur ou un hub réseau.
Système Problème Le système est trop lent Français Le système se bloque fréquemment Raison possible Trop de programmes en cours d’exécution Book 1.indb 6 Fermez les programmes non utilisés. Attaque de virus informatique • U tilisez un logiciel anti-virus pour localiser et éliminer les virus informatiques présents sur votre ordinateur. • Réinstallez le système d’exploitation. Dysfonctionnement du disque dur • Envoyez le disque dur endommagé au service après-vente d’ASUS.
Problème Système trop bruyant lors de la mise en route de l’ordinateur Système trop bruyant lors de son utilisation Raison possible Action Votre ordinateur est en cours de démarrage Ceci est normal. Le ventilateur fonctionne à sa vitesse maximale lors de la mise en route du système. La vitesse du ventilateur diminuera lors de l’accès au système d’exploitation. Les paramètres du BIOS ont été modifiés Restaurez les paramètres par défaut du BIOS.
Français Chapter 7: Troubleshooting Book 1.