User Manual

2) Install the inner rail onto the chassis.
1-1) Remove the inner rail.
Click!
outer rail
➊
Rear Bracket
3) Fix the outer rail/bracket assembly to the frame.
Detach Bracket From Rack Post
Click!
inner rail
1-2) Push (a) and slide middle rail back.
Please fasten 1 piece of M5X10 screw on front and rear bracket.
Please refer to Step 1-2 to retract middle rail back.
④
④
➊
Key Hole ① ⑤-
Click!
➋ Screw Hole
⑤
Ⓒ-M4X4L
Ⓒ
Pull tab forward and
take out inner rail.
Push tab to slide the
middle rail .back
Copyright © 2021 King Slide. All Rights Reserved
➍
Detach Inner Rail From Standoff
Pull the latch upward
and remove the
keyhole from standoff.
①
③
⒜
➌
②
Front Bracket
Click!
➋
Rear Bracket
Rear Bracket
Front Bracket
Pull
➌
➍
Rear Bracket Front Bracket
Rear Bracket
①
②
⑥
➊➋
➌
➍
➏
Pull the middle rail fully extended in lock position, ensure ball bearing
retainer is located at the front of the middle rail.
Insert the chassis into middle-outer rails.
When hit a stop, please pull the blue release tab on the inner rails.
➎ Push the chassis back to the rack.
Fasten screw on chassis ear.
4) Insert the chassis to complete the installation.
➊
Click!
➋
Blue
➍
➌
➎
➊
Pull
Pull
②
⑤
➐
Remove the chassis from rack
Pull
White
➎
③
③
①
②
③
④
⑤
Pull
➋
White
➏
①
➏
Electronic File
SCREW SACK
Ⓐ
Ⓑ
Ⓐ
Ⓑ
Ⓐ
Ⓑ
Ⓐ
Ⓑ
ⒶM5X10L(P0.8)
BKT screw
ⒷØ5.1Washer
ⒸM4X4L(P0.7)
Inner rail
ⒹM5x14.5L
Front BKT
BKT screw
R