Motherboard E35M1-M PRO E35M1-M
E6237 First Edition (V1) December 2010 Copyright © 2010 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Contents Notices.......................................................................................................... vi Safety information...................................................................................... vii About this guide......................................................................................... vii E35M1-M Series specifications summary................................................. ix Chapter 1: Product introduction 1.1 Welcome!.............................
Contents 1.13 Software support......................................................................... 1-24 1.13.1 Installing an operating system....................................... 1-24 1.13.2 Support DVD information............................................... 1-24 Chapter 2: 2.1 2.1.1 ASUS Update utility......................................................... 2-1 2.1.2 ASUS EZ Flash 2............................................................. 2-2 2.1.3 ASUS CrashFree BIOS 3 utility...
Contents 2.6 2.5.5 Onboard Devices Configuration..................................... 2-19 2.5.6 APM............................................................................... 2-20 Monitor menu.............................................................................. 2-22 2.6.1 CPU Temperature / MB Temperature . .......................... 2-22 2.6.2 CPU / Chassis Fan Speed............................................. 2-22 2.7 2.8 2.9 2.6.3 CPU Q-Fan Control ............................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • To prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
E35M1-M Series specifications summary APU Chipset System Bus Memory Expansion slots Graphics Storage LAN Audio USB Integrated Dual-Core AMD® Zacate™ 18W processor Supports AMD Cool ‘n’ Quiet™ Supports up to 2 Bobcat cores, DX11 GPU, FT1 BGA AMD® Hudson M1 FCH Up to 2.5GT/s; UMI Link 2 x DIMM, maximum 8GB, DDR3 1066 MHz, non-ECC, un-buffered memory Single-channel memory architecture * Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
E35M1-M Series specifications summary ASUS special features ASUS 2+1 Phase Power Design ASUS EPU ASUS Turbo Key II ASUS AI Suite II ASUS Turbo V ASUS Turbo Key ASUS Low EMI ASUS EFI BIOS ASUS Anti-Surge protection ASUS Fan Xpert ASUS CrashFree BIOS 3 ASUS EZ Flash 2 ASUS MyLogo 2 Rear panel ports 1 x PS/2 Keyboard / Mouse combo port 1 x DVI-D port 1 x HDMI port 1 x D-Sub port 1 x eSATA port (6.0Gb/s ready) 1 x LAN (RJ-45) port 4 x USB 2.0/1.1 ports (for E35M1-M PRO) 2 x USB 3.0/2.
Chapter 1 Product introduction 1.1 Welcome! Thank you for buying an ASUS® E35M1-M Series motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items.
DDR3 1066MHz support The motherboard supports DDR3 memory that features data transfer rates of 1066MHz to meet the higher bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications. The dual-channel DDR3 architecture enlarges the bandwidth of your system memory to boost system performance. True Serial ATA 6Gb/s support The AMD® Hudson M1 chipset natively supports the Serial ATA (SATA) interface, delivering up to 6.0 Gb/s data transfer. ASUS provides extra SATA 6.
1.3.2 Innovative ASUS features ASUS EFI BIOS (EZ Mode) ASUS brand new EFI BIOS offers a user-friendly interface that goes beyond traditional keyboard BIOS input to enable more flexible and convenient mouse controls. You can easily navigate the new EFI BIOS with the same smoothness as their operating system, while the exclusive EZ Mode displays frequently-accessed setup info, while the Advanced Mode is for experienced performance enthusiasts that demand far more intricate system settings.
ASUS MyLogo2™ This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen. ASUS CrashFree BIOS 3 ASUS CrashFree BIOS 3 is an auto-recovery tool that allows you to restore a corrupted BIOS file using the bundled support DVD or USB flash disk that contains the latest BIOS file. ASUS EZ Flash 2 ASUS EZ Flash 2 is a utility that allows you to update the BIOS without using an OS-based utility. 1.
1.5 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Ensure that you unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. ASUS E35M1-M Series motherboards include E35M1-M and E35M1-M PRO two models. The layout varies with models. The layout illustrations in this user guide are for E35M1-M PRO only. 1.5.
1.5.3 Motherboard layout 1 2 3 2 4 5 18.3cm(7.2in) 6 02LED2 CPU_FAN KB_USB56 TURBO_KEY_II ATX12V AMD Hudson M1 LAN1_USB12 Asmedia 1042 1 SATA6G_1 SATA6G_3 SATA6G_2 SATA6G_4 ® ICS 9LRPS483 AUDIO CHA_FAN Super I/O Asmedia ASM1083 VIA VT6308P PCI1 32Mb BIOS Lithium Cell CMOS Power E35M1-M PRO 9 SB_PWR PCI2 ALC 887 SPDIF_OUT IE1394_1 LPT COM1 1.5.4 1-6 10 USB1314 USB1112 USB910 USB78 AAFP 16 8 CLRTC PCIEX1_1 7 SATA6G_5 PCIEX16 RTL 8111E 24.4cm(9.
1.6 Central Processing Unit (CPU) The motherboard comes with an onboard Dual-Core AMD® Zacate™ 18W processor and a specially designed CPU heatsink. Integrated dual-core AMD® Zacate™ 18W processor E35M1-M PRO E35M1-M PRO AMD Zacate™ 18W processor 1.6.1 Installing the CPU fan (for E35M1-M PRO only) To install the CPU fan: 1. Place the CPU fan on top of the CPU heatsink. 2. Secure the fan on the heatsink with the four screws. 3.
1.6.2 Uninstalling the CPU fan (for E35M1-M PRO only) To uninstall the CPU fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Remove the four screws from the CPU fan. 3. Remove the CPU fan from the CPU heatsink. 1.7 System memory 1.7.1 Overview DIMM_A1 DIMM_A2 The motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets.
1.7.2 Memory configurations You may install 512MB, 1GB, 2GB, and 4GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets. • We recommend that you install the memory modules from the blue slots for better overclocking capability. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.
DDR3-1333 MHz capability SS/ DS Chip Brand Chip NO. Timing Voltage 6GB(3x2GB) 1GB DS SS ELPIDA J1108EDSE-DJ-F 7-7-7-24 - 2GB DS ELPIDA J1108EDSE-DJ-F 1.65V 1.35V(low voltage) 1.35V(low voltage) 1.5~1.6V 1.5~1.6V 1.5-1.6V XMP 1.35V 1.5~1.6V 1.5V 1.5V 1.5V 1.5V 1.5V 1.3V(low voltage) 1.5V 1.35V(low voltage) 1.35V(low voltage) 1.5V 1.5V 1.5V 1.5V 1.65V XMP 1.25V 1.5V 1.65V 1.7V 1.7V 1.65V 1.65V 1.65V 1.65V 1.60V 1.65V 1.65V 1.5V 1.5V 1.5V Vendor Part No. Size Crucial ELPIDA BL25664BN1337.
DDR3-1066 MHz capability Chip Brand Chip NO. SS DS DS Micron Micron ELPIDA 9GF22D9KPT 9HF22D9KPT J1108EDSE-DJ-F SS DS DS SS DS DS KTC ELPIDA Hynix Micron Micron Micron D1288JPNDPLD9U J1108BDSE-DJ-F H5TQ2G83AFR 9GF22D9KPT 9HF22D9KPT 9BF27D9KPV Vendor Part No. Size SS/DS Crucial Crucial ELPIDA CT12864BA1067.8FF CT25664BA1067.
1.8 Expansion slots In the future, you may need to install expansion cards. The following sub‑sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.8.1 Installing an expansion card To install an expansion card: 1.
1.9 Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. 2 1 2 3 CLRTC E35M1-M PRO Normal (Default) Clear RTC E35M1-M PRO Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2.
1.10 Connectors 1.10.1 Rear panel connectors 1 2 3 14 13 12 4 5 11 6 10 7 8 9 1. PS/2 Keyboard / Mouse Combo port. This port is for a PS/2 keyboard or PS/2 mouse. 2. Optical S/PDIF output port. This port connects to an external audio output device via an optical S/PDIF cable. 3. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 4. IEEE1394a port.
Audio 2, 4, 6, 8-channel configuration Port Headset 2-channel 4-channel 6-channel 8-channel Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center Lime (Front panel) - - - Side Speaker Out To configure an 8-channel audio output: Use a chassis with HD audio module in the front panel to support an 8-channel audio output.
1.10.2 1. Internal connectors ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
2. CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU FAN PWM CPU FAN IN CPU FAN PWR GND CPU_FAN CHA_FAN GND +12V Rotation E35M1-M PRO E35M1-M PRO fan connectors • Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components.
4. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~5) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.
6. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. +5V Ground Ground Speaker SPEAKER PLED- PLED+ PLED PANEL IDE_LED PWRSW Reset Ground PWR Ground IDE_LED+ IDE_LED- PIN 1 RESET E35M1-M PRO * Requires an ATX power supply E35M1-M PRO System panel connector • System power LED (2-pin PLED) • This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
8. IEEE 1394a connector (10-1 pin IE1394_1) This port is for an IEEE1394a port. Connect the IEEE1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis. PIN 1 E35M1-M PRO TPA1+ GND TPB1+ +12V TPA1GND TPB1+12V GND IE1394_1 E35M1-M PRO IEEE 1394a Connector 9. USB 2.0 connector (10-1 pin USB78, USB910, USB1112, USB1314) This connector is for a USB 2.0 port.
10. Serial port connectors (10-1 pin COM1) The connector is for a serial (COM) port. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis. The serial port bracket (COM1) is purchased separately.
1.11 Onboard switches Onboard switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. Turbo Key II switch This switch allows you to auto-tune your CPU to enhance the system performance. To ensure system performance, turn the switch setting to Enable when the system is powered off.
1.12 1. Onboard LEDs Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. SB_PWR E35M1-M PRO ON Standby Power OFF Powered Off E35M1-M PRO Onboard LED 2.
1.13 Software support 1.13.1 Installing an operating system This motherboard supports Windows® XP / Vista / 7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. • Motherboard settings and hardware options vary. Refer to your OS documentation for detailed information.
Chapter 2 BIOS information 2.1 Managing and updating your BIOS Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility. 2.1.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. • ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP).
The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating from a BIOS file 3. a. Select Update BIOS from file, then click Next. b. Locate the BIOS file from the Open window, then click Open. Follow the onscreen instructions to complete the updating process. 2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility.
3. Press to switch to the Drive field. 4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. • This function supports USB flash disks with FAT 32/16 format and single partition only.
2.1.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process. The succeeding utility screens are for reference only. The actual utility screen displays may not be same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. 2.
Backing up the current BIOS To backup the current BIOS file using the BIOS Updater Ensure that the USB flash drive is not write-protected and has at least 1024KB free space to save the file. 1. At the FreeDOS prompt, type bupdater /o[filename] and press . D:\>bupdater /oOLDBIOS1.rom Filename Extension The [filename] is any user-assigned filename with no more than eight alphanumeric characters for the filename and three alphanumeric characters for the extension. 2.
Updating the BIOS file To update the BIOS file using BIOS Updater 1. At the FreeDOS prompt, type bupdater /pc /g and press . D:\>bupdater /pc /g 2. The BIOS Updater screen appears as below. ASUSTek BIOS Updater for DOS V1.18 Current ROM BOARD: E35M1-M PRO VER: 0027 DATE: 11/12/2010 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ E35M1ID.ROM A: Note [Enter] Select or Load [Up/Down/Home/End] Move 3.
2.2 BIOS setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: • Press during the Power-On Self Test (POST). If you do not press , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
BIOS menu screen The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen. EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority.
Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the EZ Mode, click Exit, then select ASUS EZ Mode.
Pop-up window Select a menu item and press to display a pop-up window with the configuration options for that item. Scroll bar A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. Press the Up/Down arrow keys or / keys to display the other items on the screen. Navigation keys At the bottom right corner of the menu screen are the navigation keys for the BIOS setup program.
2.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change an administrator password: 1.
2.4 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.
2.4.1 Ai Overclock Tuner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set overclocking parameters. [X.M.P] If you install memory module(s) supporting the eXtreme Memory Profile (X.M.P.) Technology, this option appears.
2.4.6 [+] [–] CPU Offset Mode Sign [+] To offset the voltage by a positive value. To offset the voltage by a negative value. CPU Voltage [Auto] Allows you to set the CPU Offset voltage. The values range from -0.3V to +0.5V with a 0.00625V interval. Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage may damage the CPU permanently, and setting a low voltage may make the system unstable. 2.4.7 [+] [–] VDDNB Offset Mode Sign [+] To offset the voltage by a positive value.
2.4.12 Load-Line Calibration [Auto] 2.4.13 APU Spread Spectrum [Auto] 2.5 Advanced menu Allows you to enable or disable the Load-Line calibration function. Configuration options: [Auto] [Disabled] [Enabled] [Auto] Automatic configuration. [Disabled] Enhances the PCIE overclocking ability. [Enabled] Sets to [Enabled] for EMI control. The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items.
Cool ‘n’ Quiet [Enabled] Enables or disables the AMD® Cool ‘n’ Quiet technology. Configuration options: [Enabled] [Disabled] NX Mode [Enabled] Enables or disables no-execute page protection function. Configuration options: [Disabled] [Enabled] SVM Mode [Enabled] Enables or disables CPU virtualization. Configuration options: [Disabled] [Enabled] C6 Mode [Enabled] Enables or disables C6 mode. Configuration options: [Enabled] [Disabled] 2.5.
2.5.3 USB Configuration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] [Disabled] [Auto] Enables the support for USB devices on legacy operating systems (OS). The USB devices can be used only for the BIOS setup program. Allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled.
2.5.5 Onboard Devices Configuration HD Audio Device [Enabled] Enables or disables the Azalia High Definition Audio controller. Configuration options: [Disabled] [Enabled] Front Panel Type [HD] Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or highdefinition audio depending on the audio standard that the front panel audio module supports. [HD] Sets the front panel audio connector (AAFP) mode to high definition audio.
Serial Port Configuration The sub-items in this menu allow you to set the serial port configuration. Serial Port [Enabled] Allows you to enable or disable the serial port (COM). Configuration options: [Enabled] [Disabled] Change Settings [IO=3F8h; IRQ=4] Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] Parallel Port Configuration The sub-items in this menu allow you to set the parallel port configuration.
Power On By PME [Disabled] [Disabled] Disables PME wake from sleep states. [Enabled] Enables PME wake from sleep states. Power On By Ring [Disabled] [Disabled] Disables Ring to generate a wake event. [Enabled] Enables Ring to generate a wake event. Power On By RTC [Disabled] [Disabled] [Enabled] Disables RTC to generate a wake event. When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values.
2.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings.
2.6.3 [Disabled] [Enabled] CPU Q-Fan Control [Enabled] Disables the CPU Q-Fan control feature. Enables the CPU Q-Fan control feature. CPU FAN Mode [DC Mode] This item appears only when you enable the CPU Q-Fan Control feature and allows you to select the CPU fan mode. [PWM Mode] Select this option when using a 4-pin CPU fan. [DC Mode] Select this option when using a 3-pin CPU fan.
2.6.4 [Disabled] [Enabled] Chassis Q-Fan Control [Enabled] Disables the Chassis Q-Fan control feature. Enables the Chassis Q-Fan control feature. Chassis Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed.
2.7 Boot menu The Boot menu items allow you to change the system boot options. EFI BIOS Utility - Advanced Mode Ai Tweaker Main Exit Advanced Bootup NumLock State Full Screen Logo Option ROM Messages Monitor On Boot Tool Select the keyboard NumLock state Enabled Force BIOS Setup Mode EZ Mode Boot Option Priorities Boot Override →←: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save ESC: Exit Version 2.00.
2.7.4 Setup Mode [EZ Mode] 2.7.5 Boot Option Priorities [Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup program. [EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program. These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
2.8 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the submenu. EFI BIOS Utility - Advanced Mode Ai Tweaker Main Advanced Exit Monitor Boot Tool Be used to update BIOS > ASUS EZ Flash Utility > ASUS Setup Profile 2.8.1 ASUS EZ Flash Utility Allows you to run ASUS EZ Flash 2. When you press , ASUS EZ Flash 2 screen appears. For more details, refer to section 2.1.2 ASUS EZ Flash 2. 2.8.
2.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Exit Load Optimized Defaults Save Changes & Reset Discard Changes & Exit ASUS EZ Mode Launch EFI Shell from filesystem device Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site Technical Support Telephone Online support 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw +86-21-38429911 support.asus.
(510)739-3777/(510)608-4555 800 Corporate Way, Fremont, CA 94539. Asus Computer International Signature : Date : Representative Person’s Name : Dec. 20, 2010 Steve Chang / President This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
