Motherboard E3 PRO GAMING V5
E11146 First Edition (V1) November 2015 Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information....................................................................................... iv About this guide.......................................................................................... iv Package contents........................................................................................ vi E3 PRO GAMING V5 specifications summary.......................................... vi Chapter 1: Product introduction 1.1 Before you proceed.................................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. 2. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Package contents Check your motherboard package for the following items. Motherboard ASUS Gaming Motherboard – E3 PRO GAMING V5 Cables 4 x Serial ATA 6.0 Gb/s cables Accessories 1 x I/O Shield 1 x PRO GAMING cable labels 1 x M.2 screw package 1 x pack of cable tie Application DVD Support DVD Documentation User Guide If any of the above items is damaged or missing, contact your retailer.
E3 PRO GAMING V5 specifications summary SupremeFX 8-Channel High Definition Audio CODEC - Supports Jack-detection, Multi-streaming, and Front Panel MIC Jack-retasking - High quality 115dB SNR stereo playback output Audio Audio Features: - SupremeFX Shielding™ Technology - Headphone AMP - Optical S/PDIF out port at back panel - Sonic Radar II Storage Intel® C232 Express Chipset with RAID 0, 1, 5, 10 and Intel Rapid Storage Technology Enterprise support - 6 x SATA 6.0 Gb/s connectors - 1 x M.
E3 PRO GAMING V5 specifications summary 1 x PS/2 keyboard port (purple) 1 x PS/2 mouse port (green) 1 x Optical S/PDIF out Rear Panel I/O ports 1 x LAN (RJ-45) port 2 x USB 3.1 ports (1 Type-A, red; 1 Type-C, black) 4 x USB 3.0 / 2.0 ports 2 x USB 2.0 ports 8-channel audio I/O ports 1 x 19-pin USB 3.0 / 2.0 connector support additional 2 USB 3.0 / 2.0 ports 2 x USB 2.0 / 1.1 connectors support additional 4 USB 2.0 / 1.
Product introduction 1.1 Before you proceed 1 Take note of the following precautions before you install motherboard components or change any motherboard settings. 1.2 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
Place this side towards the rear of the chassis 1.2.3 Motherboard layout 1 2 3 2 4 24.4cm(9.6in) KBMS EATX12V DIGI +VRM CPU_FAN W_PUMP USB78 BOOT_DEVICE_LED 5 CHA_FAN1 AUDIO 1 USB3_12 LANGuard CPU_LED 30.5cm(12.0in) LAN_USB3_34 DRAM_LED EATXPWR ASM 1142 USB3.1_EC1 DDR4 DIMM_B2 (64bit, 288-pin module) LGA1151 DDR4 DIMM_B1 (64bit, 288-pin module) USB3.
1.2.4 Layout contents Connectors/Jumpers/Slots/LED 1. ATX power connectors (24-pin EATXPWR, 8-pin ATX12V) 2. CPU, water pump, and chassis fan connectors (4-pin CPU_FAN, 4-pin W_ PUMP, 4-pin CHA_FAN1~3) 3. Intel® LGA1151 CPU socket 4. DDR4 DIMM slots 5. Q LEDs (BOOT_DEVICE_LED, VGA_LED, DRAM_LED, CPU_LED) 6. USB 3.0 connector (20-1 pin USB3_12) 7. Intel® C232 Serial ATA 6.0 Gb/s connector (7-pin SATA6G_1~6) 8. M.2 Socket 3 9. CPU Over Voltage jumper (3-pin CPU_OV) 10.
Unplug all power cables before installing the CPU. 1.3.1 • Ensure that you install the correct CPU designed for the LGA1151 socket only. DO NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets on the LGA1151 socket. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
4 5 C A B 1.3.2 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
To install the CPU heatsink and fan assembly 1 2 A B B A 3 4 To uninstall the CPU heatsink and fan assembly 1 2 A B B A 1-6 Chapter 1: Product introduction
1.4 System memory 1.4.1 Overview This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) sockets. DIMM_B1 DIMM_B2 DIMM_A1 DIMM_A2 A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Channel Channel A Channel B Sockets DIMM_A1 & DIMM_A2 DIMM_B1 & DIMM_B2 E3 PRO GAMING V5 288-pin DDR4 DIMM sockets 1.4.
• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • According to Intel® CPU spec, DIMM voltage below 1.35V is recommended to protect the CPU.
DDR4 2800 MHz (O.C.) capability DIMM socket support Voltage (Optional) 1 DIMM 2 DIMMs 4 DIMMs N/A Heat-Sink Package 16-18-18-36 1.2V • • • N/A Heat-Sink Package 1.35V • • • N/A Heat-Sink Package 16-16-16-36 1.2V • • N/A Heat-Sink Package 16-18-18-36 1.2V • • • SK HYNIX H5AN4G8NMFR 16-16-16-36 1.2V • • N/A Heat-Sink Package 16-18-18-36 1.25V • • • N/A Heat-Sink Package 16-16-16-36-52 1.2V • • • N/A Heat-Sink Package 14-15-15-39-63 1.35V • • • Vendors Part No. Size SS/DS Chip Brand CORSAIR G.SKILL G.
DDR4 2133 MHz capability Vendors Part No. Size SS/ DS Chip Brand Chip NO. Timing SAMSUNG SAMSUNG G.SKILL G.
1.4.
1.5 Expansion slots In the future, you may need to install expansion cards. The following sub‑sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.5.1 Installing an expansion card To install an expansion card: 1.
VGA configuration PCI Express operating mode PCIe 3.0 x16_1 PCIe 3.0 x16_2 Single VGA/PCIe card x16 (Recommended for single VGA card) N/A Dual VGA/PCIe cards x16 x4 • In single VGA card mode, use the PCIe 3.0 x16_1 slot for a PCI Express x16 graphics card to get better performance. • We recommend that you provide sufficient power when running CrossFireX™ mode. See page 1-23 for details.
1.6 1. Jumpers Clear RTC RAM (2-pin CLRTC) This header allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. +3V_BAT GND CLRTC PIN 1 E3 PRO GAMING V5 Clear RTC RAM To erase the RTC RAM: 1-14 1. Turn OFF the computer and unplug the power cord. 2.
2. CPU Over Voltage jumper (3-pin CPU_OV) The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2. 1 2 CPU_OV Disable (default setting) 2 3 Enable E3 PRO GAMING V5 CPU_OV setting 1.7 Connectors 1.7.1 Rear panel connectors 2 1 13 12 9 11 10 9 3 4 5 6 8 7 1.
LAN port LED indications Activity/Link LED Status Off Orange Orange (Blinking) Orange (Blinking then steady) Description No link Linked Data activity Speed LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection Activity Link Speed LED LED LAN port Ready to wake up from S5 mode 3. Center / Subwoofer port (orange). This port connects the center/subwoofer speakers. 4. Rear Speaker Out port (black). This port connects the rear speakers in a 4.1 channel, 5.
10. USB 3.1 Type A port. This 9-pin Universal Serial Bus (USB) Type A port is for USB 3.1 devices. 11. USB 3.1 Type C port. This Universal Serial Bus (USB) Type C port is for USB 3.1 mobile or peripheral devices. 12. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 13. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. 1.7.2 1. Internal connectors Serial port connector (10-1 pin COM) This connector is for a serial (COM) port.
2. M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module. M.2(SOCKET3) 22110 2280 2260 2242 E3 PRO GAMING V5 M.2(SOCKET3) • This socket supports M Key and 2242/2260/2280/22110 storage devices. • When the M.2 Socket 3 is operating in SATA mode, SATA port 1 will be disabled. • When using Intel® Desktop Responsiveness technologies with PCIe M.2 device, ensure to set up the Windows® UEFI operating system under RAID mode. The M.2 (NGFF) SSD module is purchased separately 3.
4. CPU, water pump, and chassis fan connectors (4-pin CPU_FAN; 4-pin W_PUMP; 4-pin CHA_FAN1~3) A B C CPU_FAN W_PUMP CHA_FAN1 PUMP PWM PUMP IN PUMP PWR CHA FAN PWM CHA FAN IN CHA FAN PWR GND Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
5. ATX power connectors (24-pin EATXPWR, 8-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
7. Front panel audio connector (10-1 pin AAFP) NC AGND NC NC SENSE2_RETUR AGND NC SENSE1_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP HD-audio-compliant pin definition MIC2 MICPWR Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L PIN 1 Legacy AC’97 compliant definition E3 PRO GAMING V5 Front panel audio connector 8.
9. USB 3.0 connector (20-1 pin USB3_12) This connector allows you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of USB 3.0 including faster data transfer speeds of up to 5 Gbps, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0.
10. Intel® C232 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~6) This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.
11. System panel connector (20-5 pin PANEL) This connector supports several chassis-mounted functions. PANEL +HDD_LED- RESET PLED- HDD_LED+ HDD_LEDGND RSTCON# NC PLED+ PIN 1 SPEAKER +5V GND GND Speaker PWR_SW PLED+ PLEDPWRBTN# GND +PWR_LED- +PWR_LED- * Requires an ATX power supply E3 PRO GAMING V5 System panel connector • System power LED (4-pin +PWR_LED-) This 4-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
1.8 1. Onboard LED Standby Power LED (SB_PWR) The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. SB_PWR ON Standby Power OFF Powered Off E3 PRO GAMING V5 Standby power LED 2.
3. SupremeFX LED The SupremeFX LED lights up in the following three ways to bring you an ultimate lighting effect. This LED also outlines the separation of the audio components from the rest of your motherboard. SupremeFX LED E3 PRO GAMING V5 SupremeFX LED Lighting Lit mode Breathing mode Flowing mode Still mode Description The LED blinks intermittently. The LED lights up and dims like flowing water. The LED becomes solid red. You can turn off the SupremeFX LED or change the lit modes from the BIOS.
1.9 1.9.1 Software support Installing an operating system This motherboard supports Windows® 7 (32-bit / 64-bit), Windows® 8.1 (64-bit) and Windows® 10 (64-bit) Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. Motherboard settings and hardware options vary. Refer to your OS documentation for detailed information. 1.9.
1-28 Chapter 1: Product introduction
BIOS information 2.1 Managing and updating your BIOS 2 Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility. 2.1.1 EZ Update EZ Update is a utility that allows you to automatically update your motherboard’s softwares, drivers and the BIOS version easily. With this utlity, you can also manually update the saved BIOS and select a boot logo when the system goes into POST.
2.1.2 ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS‑based utility. • Ensure that you load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 2.10 Exit Menu for details. • Check your Internet connection before updating the BIOS via the Internet. To update the BIOS using EZ Flash 3: 1. Enter the Advanced Mode of the BIOS setup program.
2.1.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the updated BIOS file. • Before using this utility, rename the BIOS file in the removable device into E3PG5.CAP. • The BIOS file in the support DVD may not be the latest version.
Booting the system in DOS environment To boot the system in DOS: 1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. 2. Boot your computer then press to launch the select boot device screen. 3. When the select boot device screen appears, insert the Support DVD into the optical drive then select the optical drive as the boot device.
ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: E3 PRO GAMING V5 VER: 0209 (H :00 B :00) DATE: 11/18/2015 PATH: Drives panel Update ROM BOARD: Unknown VER: Unknown DATE: Unknown C:\ C: D: FORMAN~1 E3PG5.CAP
16779264 2015-11-18 21:14:34 Files panel Note [Enter] Select or Load [Up/Down/Home/End] Move [Tab] Switch [Esc] Exit [V] Drive Info 3.2.2 BIOS setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: Press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: Press ++ simultaneously.
2.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode, fan profile and boot device priority. To access the Advanced Mode, click Advanced Mode(F7) or press . The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section 2.8 Boot menu for details.
2.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the EZ Mode, click EzMode(F7) or press .
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings Boot For changing the system boot configuration Tool For configuring options for special functions Exit F
Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes. Hot keys This button above the menu bar contains the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings.
2.2.3 QFan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Click to manually configure your fans To configure your fans: 2-12 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
2.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items. Adding items to My Favorites To add BIOS items: 1. Press on your keyboard or click Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen.
3. Select an item from main menu panel, then click the submenu that you want to save as favorite from the submenu panel and click . You cannot add the following items to My Favorite items: • User-managed items such as language and boot order 4. Click Exit (ESC) or press key to close Setup Tree Map screen. 5. Go to My Favorites menu to view the saved BIOS items. 2.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program.
Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. From the Confirm New Password box, key in your password again to confirm the password, then click OK. To change an administrator password: 1.
2.5 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. 2.5.
3-Core Ratio Limit [Auto] Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 3-Core Limit value that must be higher than or equal to the 4-Core Ratio Limit. If you assign a value for 3-Core Ratio Limit, do not set the 1-Core Ratio Limit and 2-Core Ratio Limit to [Auto]. 4-Core Ratio Limit [Auto] Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 4-Core Limit value that must be lower than or equal to the 3-Core Ratio Limit.
2.5.6 CPU SVID Support [Auto] Disabling SVID Support stops the processor from communicating with the external voltage regulator. Configuration options: [Auto] [Disabled] [Enabled] 2.5.7 DRAM Timing Control The subitems in this menu allow you to set the DRAM timing control features. Use the <+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the key.
CPU Power Duty Control [T.Probe] DIGI + VRM Duty control adjusts the current and thermal conditions of every component’s phase. [T. Probe] Select to maintain the VRM thermal balance. [Extreme] Select to maintain the current VRM balance. CPU Power Phase Control [Auto] This item allows you to set the power phase control of the CPU. Configuration options: [Auto] [Standard] [Optimized] [Extreme] DO NOT remove the thermal module when setting this item to [Extreme]. The thermal conditions should be monitored.
2.5.10 CPU Core/Cache Current Limit Max. [Auto] Allows you to set a higher current limit to prevent a frequency or power throttling when overclocking. Use the <+> or <-> keys to adjust the value. The values range from 0.00A to 255.50A with a 0.25A interval. 2.5.11 Min. CPU Cache Ratio [Auto] Allows you to set the minimum possible CPU cache ratio. Use the <+> or <-> keys to adjust the value. The values range from 8 to 34 with a 1 interval. 2.5.12 Max.
2.5.16 CPU System Agent Voltage [Auto] This item allows you to set the voltage for the CPU System Agent. Use the <+> and <-> keys to adjust the value. The values range from 0.700V to 1.635V with a 0.005V interval. 2.5.17 PCH Core Voltage [Auto] This item allows you to set the PCH core voltage. Use the <+> and <-> keys to adjust the value. The values range from 0.800V to 1.635V with a 0.005V interval. 2.5.18 CPU Standby Voltage [Auto] This item allows you to set the voltage for the CPU Standby.
2.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 2.6.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in submenu may be different due to the CPU you installed.
CPU Power Managerment Configuration This item allows you to manage and configure the CPU’s power. Intel® SpeedStepTM [Auto] This item allows the operating system to dynamically adjust the processor voltage and cores frequency, resulting to a decreased average power consumption and decreased average heat production.
The following item appears only when you set the PCI Express Native Power Management to [Enabled]. Native ASPM [Disabled] [Enabled] Windows® Vista OS controls the ASPM (active state power management) support for devices. [Disabled] BIOS controls the ASPM support for the device. PCH - PCI Express options DMI Link ASPM Control [Disabled] This item allows you to control the Active State Power Management on both NB (NorthBridge) side and SB (SouthBridge) side of the DMI Link.
Memory Configuration Allows you to configure the memory configuration parameters. Memory Remap [Enabled] Set this item to [Enabled] to support DRAM address remapping for 64-bit operating systems. Configuration options: [Enabled] [Disabled] 2.6.4 PCH Configuration This item allows you to configure the PCI Express configuration settings. PCI Express Configuration PCIe Speed [Auto] Allows you to configure the PCIe speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] 2.6.
SATA6G_1~6(Gray) [Enabled] Allow you to enable/disable the SATA6G_1~6 port. Configuration options: [Disabled] [Enabled] Hot Plug [Disabled] These items allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 2.6.6 USB Configuration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None.
Front Panel Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports. [HD] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97. Depop [Enabled] Configuration options: [Enabled] [Disabled] SupremeFX LED Lighting [Breathing Mode] Allows you to set the behavior of the audio LED.
Intel PXE Option ROM [Off] This item appears only when you set the previous item to [On] and allows you to enable or disable the PXE OptionRom of the Intel LAN controller. Configuration options: [On] [Off] USB Type C Power Switch [Auto] [Auto] Turns off power to the Type C port when the device is not supported. [Enabled] Turns on power to the Type C port. Serial Port Configuration The sub-items in this menu allow you to set the serial port configuration.
Power On By RTC [Disabled] This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] 2.6.9 Network Stack Configuration Network Stack [Disabled] This item allows user to disable or enable the UEFI network stack.
2.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. 2.7.1 CPU/ MotherBoard Temperature, VRM Temperature, PCH Temperature, T_Sensor Temperature [xxxºC/ xxxºF]/ [Ignore] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select [Ignore] if you do not wish to display the detected temperatures. 2.7.
CPU Q-Fan Control [Auto] [Auto] Enables the CPU Q-Fan control for 4-pin CPU fan. [Disabled] Disables the CPU Q-Fan control feature. [PWM Mode] Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan. [DC Mode] Enable the CPU Q-Fan control in DC mode for 3-pin CPU fan. CPU Fan Speed Lower Limit [300 RPM] This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set the CPU fan warning speed.
2.7.5 Chassis Fan 1/2/3 Q-Fan Control [DC Mode] [PWM mode] Enables the chassis Q-Fan control in PWM mode for 4-pin chassis fan. [DC mode] Enables the chassis Q-Fan control in DC mode for 3-pin chassis fan. [Disabled] Disables the chassis Q-Fan control feature. The following items appear only when you set the Chassis Fan 1/2/3 Q-Fan Control to [PWM Mode] or [DC Mode]. Chassis Fan 1/2/3 Q-Fan Source [CPU] This item controls the assigned fan according to the selected temperature source.
Water Pump Control [Disabled] [Disabled] Disable the Water Pump control feature. [DC mode] Enable the Water Pump control in DC mode for 3-pin chassis fan. [PWM mode] Enable the Water Pump control in PWM mode for 4-pin chassis fan. The following items appear only when you set the Water Pump Control to [DC mode] or [PWM mode]. Water Pump Upper Temperature [70] Use the <+> or <-> keys to adjust the upper limit of the Water Pump temperature. The values range from 25 to 75. Water Pump Max.
2.8 Boot menu The Boot menu items allow you to change the system boot options. Scroll down to display the other BIOS items. 2.8.1 Fast Boot [Enabled] [Enabled] Select to accelerate the boot speed. [Disabled] Select to go back to normal boot speed. Next Boot after AC Power Loss [Normal Boot] [Normal Boot] Returns to normal boot on the next boot after AC power loss. [Fast Boot] Accelerates the boot speed on the next boot after AC power loss. 2.8.
2.8.4 Wait for ‘F1’ If Error [Enabled] When this item is set to [Enabled], the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] 2.8.5 Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be displayed during POST. [Keep Current] Disables the ROM messages and displays only the ASUS logo during POST. 2.8.6 Interrupt 19 Capture [Disabled] This item allows you to trap Interrupt 19 by the option ROMs.
2.8.9 Secure Boot Allows you to configure the Windows® Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST. OS Type [Windows UEFI mode] Allows you to select your installed operating system. [Windows UEFI mode] This item allows you to select your installed operating system. Execute the Microsoft® Secure Boot check. Only select this option when booting on Windows® UEFI mode or other Microsoft® Secure Boot compliant OS.
Delete key Allows you to delete the Key from your system. Configuration options: [Yes] [No] DB Management The db (Authorized Signature database) lists the signers or images of UEFI applications, operating system loaders, and UEFI drivers that you can load on the single computer. Set New Key Allows you to load the downloaded db from a USB storage device. Append Key Allows you to load the additional KEK from a storage device for an additional db and dbx loaded management.
2.9 Tool menu The Tool menu items allow you to configure options for special functions. Select an item then press to display the submenu. 2.9.1 ASUS EZ Flash 3 Utility Allows you to run ASUS EZ Flash 3. Press [Enter] to launch the ASUS EZ Flash 3 screen. For more details, see section 2.1.2 ASUS EZ Flash 3. 2.9.2 Secure Erase SSD speeds may lower over time as with any storage medium due to data processing.
Status definition: 2.9.3 • Frozen. The frozen state is the result of a BIOS protective measure. The BIOS guards drives that do not have password protection by freezing them prior to booting. If the drive is frozen, a power off or hard reset of your PC must be performed to proceed with the Secure Erase. • Locked. SSDs might be locked if the Secure Erase process is either incomplete or was stopped. This may be due to a third party software that uses a different password defined by ASUS.
2.9.6 Graphics Card Information This item displays the information about the graphics card installed in your system. GPU Post This item displays the information and recommended configuration for the PCIE slots that the graphics card is installed in your system. 2.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items.
2.11 Installing an operating system Motherboard settings and hardware options vary. The setup procedures presented in this chapter are for reference only. Refer to Windows® operating system documentation for detailed information. 2.11.1 Windows® 7 and USB 3.0 driver for E3 PRO GAMING V5 Based on the chipset specification, the E3 PRO GAMING V5 requires USB 3.0 drivers to be preloaded in order to use USB keyboard/mouse during Windows® 7 installation. This section is a guide on preloading USB 3.
5. Select the USB ODD or USB storage device as the boot device. 6. The USB 3.0 driver will be loaded automatically during installation startup. The “Setup is starting...” screen will show up if the USB 3.0 driver is loaded correctly. 7. 2-42 Follow the onscreen instructions to complete the Windows® 7 installation.
Method 2: Using a modified Windows® 7 ISO Load USB 3.0 drivers and install Windows® 7 using a modified Windows® 7 installation DVD. Requirement: • 1 x ASUS support DVD • 1 x Windows® 7 installation source • 1 x Working system (PC or notebook) • 1 x SATA ODD 1. On your working system, create an ISO image file of the Windows® 7 installation source using a third-party ISO software. 2. Copy both “Auto_Unattend.
Method 3: Using ASUS EZ Installer Use the ASUS EZ Installer to create a modified Windows® 7 installation source. Requirement: • 1 x ASUS support DVD • 1 x Windows® 7 installation DVD • 1 x Working system (PC or notebook) • 1 x SATA ODD • 1 x USB storage device (8 GB or more) 1. Insert the Windows® 7 installation DVD. 2. Launch the ASUS EZ Installer located on the ASUS support DVD. 3.
- Select the source of the Windows® 7 installation disk then click Next. - Select the USB storage device and click next. Click the refresh icon if the USB storage device is not displayed. - Click Yes to clear the contents on the USB storage device and create a bootable USB device. Make sure to backup contents on the USB storage device, as it will be formatted. - Once completed, click OK to finish.
• Windows® 7 OS disk to ISO file - Select Windows 7 OS disk to ISO file then click Next. - Check I agree and then click Next. - Select the source of the Windows® 7 installation disk then click Next.
- Select the folder to save the modified Windows® 7 installation ISO file and click Next. - Once completed, click OK to finish. - Burn this ISO file onto an empty DVD to create a modified Windows® 7 installation DVD. 4. Insert the modified Windows® 7 installation DVD into an ODD or connect the USB storage device with modified Windows® 7 installation files onto your platform. 5. Power on your system and press F8 during POST (Power-On Self Test) to enter the boot screen. 6.
2-48 Chapter 2: Getting started
Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. VCCI: Japan Compliance Statement VCCI Class B Statement This is a Class B product based on the standard of the VCCI Council.
English AsusTek Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of CE Directives. Please see the CE Declaration of Conformity for more details. Română Prin prezenta, AsusTek Inc. declară faptul că acest dispozitiv respectă cerinţele esenţiale şi alte prevederi relevante ale directivelor CE. Pentru mai multe detalii, consultaţi declaraţia de conformitate CE. Français AsusTek Inc.
ASUS contact information ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site http://www.asus.com Technical Support Telephone Fax Online support +86-21-3842-9911 +86-21-5866-8722 ext. 9101# http://support.asus.com/techserv/techserv.
ASUS E3 PRO GAMING V5 A-5 (510)739-3777/(510)608-4555 800 Corporate Way, Fremont, CA 94539. Asus Computer International Date : Signature : Representative Person’s Name : Dec. 1, 2015 Steve Chang / President This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
A-6 Appendices
