E12339 First Edition April 2017 E-Manual
COPYRIGHT AND WARRANTY INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents About this manual.............................................................................................. 5 Conventions used in this manual................................................................ 6 Typography.......................................................................................................... 6 Multi-language versions................................................................................. 6 Safety precautions.....................................
Chapter 3: Using the LED projector Downloading the companion apps...........................................................32 Using the companion app.............................................................................33 Settings .............................................................................................................33 Projection..............................................................................................................33 Brightness............................
About this manual This manual provides information about the hardware and software features of your LED projector through the following chapters: Chapter 1: Knowing your LED Projector This chapter details the parts of your LED projector and its accompanying remote control. Chapter 2: Setting up This chapter shows you how to set up your LED projector and use its parts for input device connection.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing tasks and prevent damage to your LED projector's data and components.
Safety precautions Using your LED projector • Refer to the manual and take note of the safety instructions before operating your LED projector. • Follow the notes and warnings stated in the user manual. • DO NOT place your LED projector on uneven or unstable surfaces. • DO NOT use your LED projector in smoky environments. Smoke residue may cause build-up on critical parts and damage the LED projector or decrease its performance.
Caring for your LED projector • Switch off then unplug the LED projector from the power outlet before cleaning it. • When cleaning the LED projector’s housing, use a clean soft cloth dampened with water or a mix of water and neutral detergent. Wipe it dry using a soft dry cloth. • Ensure that the lens is cool before cleaning it. Gently wipe the lens using a lens cleaning paper. DO NOT touch the lens with your hands. • DO NOT use liquid or aerosole cleaners, benzene, or thinners on your LED projector.
Chapter 1: Knowing your LED projector Chapter 1: Knowing your LED projector LED projector E-Manual 9
Features Top view Focus ring The focus ring allows you to adjust the image focus of your LED projector.
Power indicator and battery status indicator This LED indicator indicates the following scenarios for your LED projector: • It lights up when the LED projector is powered on. • It lights up as either green or red depending on the battery charge status.
Front view Lens cover The lens cover protects the lens from scratches and possible dirt build-up. IMPORTANT! Remove the lens cover before using your LED projector. Lens The lens projects video or image files onscreen from your input device. WARNING! 12 • DO NOT touch the lens with your hands or any sharp object. • DO NOT look directly into the lens.
Rear view Manual reset hole Insert a straightened paper clip in this hole to restore your LED projector to its default settings. Audio output jack port The audio output jack port allows you to connect your LED projector to amplified speakers or headphones. Micro USB 2.0 port This port also allows you to connect your LED projector to a compatible device to stream media contents. Power output port This power output port provides up to 5V/1A of output voltage and current.
Power (DC) input port Insert the bundled power adapter into this port to charge the battery pack and supply power to your LED projector. IMPORTANT! Use only the bundled power adapter to charge the battery pack and supply power to your LED projector. WARNING! The adapter may become warm to hot while in use. DO NOT cover the adapter and keep it away from your body while it is connected to a power source. Power / Splendid button • Long press this power button to turn on or turn off your LED projector.
Right side Focus ring The focus ring allows you to adjust the image focus of your LED projector. Air vents The air vents allow cool air to enter and warm air to exit the LED projector. WARNING! Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Left side Air vents The air vents allow cool air to enter and warm air to exit the LED projector. WARNING! Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Bottom view Tripod socket Attach the LED projector to a tripod using this socket.
Extended features Your LED projector also have stand-alone features that are launched by pressing the Power / Splendid button while your LED projector is on battery mode. NOTE: • These feature are only available when no power adapter or signal is connected to the LED projector. • To turn off or switch between the flashlight and SOS feature of your LED projector, just press the Power / Splendid button until your preferred lighting feature is disabled or enabled.
2. Open the cover of your LED projector’s lens. 3. Press the Power / Splendid button repeatedly until the LED projector flashes a steady white light. SOS The LED projector flashes a blinking white light when you use this feature. Power / Splendid button To use your LED projector as an emergency light: 1. Disconnect all peripherals from your LED projector then long press the power button to turn it on. 2. Open the cover of your LED projector's lens. 3.
LED projector E-Manual
Chapter 2: Setting up Chapter 2: Setting up LED projector E-Manual 21
Operating your LED projector This portable LED projector allows you to plug and play your devices so you can easily open multimedia files and hear audio straight from its built-in SonicMaster speakers. For your safety and to maintain the quality of this unit, refer to the following steps when operating your LED projector. Connect the LED projector to the power adapter A. Connect the micro USB cable to the power adapter. B. Connect the micro USB connector into your LED projector. C.
IMPORTANT! • Use only the bundled power adapter to charge the battery pack and supply power to your LED projector. • Ensure that your LED projector is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your LED projector on power adapter mode. • The socket outlet must be easily accessible and near your LED projector.
Connect the LED projector to your device Connecting micro USB devices A. Connect one end of the micro USB to micro USB cable into your LED projector. B. Connect the other end of the micro USB to micro USB cable to your device.
Connecting USB Type-C devices A. Connect the micro USB connector of the micro USB cable into your LED projector. B. Connect the other end of the micro USB cable to the USB Type-C male to USB Type-A female adapter. C. Connect the adapter to your device.
Connecting peripherals Audio output Power output (5V/1A) 1s 26 LED projector E-Manual
Press the power button 3s NOTE: The battery pack inside your LED projector stops charging while the LED projector is in use. Refer to the battery indicator for the current charge status of your LED projector. You may also refer to the Top View section in this manual for more details.
Open the lens cover and adjust the focus ring NOTE: Use a still image when adjusting the onscreen display. A. Open the lens cover by moving it to the right. B. Adjust the image focus of the projection onscreen by moving the focus ring up or down.
Screen size and projection distance table Adjust the LED projector’s distance from the screen using the table below. Screen size - 16:9 (inches) (millimeters) Projection distance (meters) 16 394 0.5 32 813 1.0 100 2540 3.1 120 3048 3.
LED projector E-Manual
Chapter 3: Using the LED projector Chapter 3: Using the LED projector LED projector E-Manual 31
Downloading the companion apps Your LED projector requires additional companion apps on your device before you can stream media contents from it. A. Connect your device to the Internet, then log in or sign up for a Google account. B. Scan the QR codes or Launch Play Store and search for the companion apps. C. Install the companion apps.
Using the companion app After you have installed the additional companion apps, you can use the apps to change the settings of your LED projector. Settings Select this menu option to adjust your LED projector settings. Projection Turn this menu option ON to stream media contents from your device.
Brightness Move the slider to adjust the brightness of your projection onscreen. Keystone Auto keystone Select this menu option to automatically adjust the alignment of your image. Correction This option allows you to manually adjust the alignment of your image. You can also move the slider to make quick adjustments. Projection Position This option allows you to change the way your projections are oriented onscreen based from the current location of your LED projector.
Refer to the following information for details on the different modes you can activate via Splendid: • Presentation mode - This mode allows you to optimize the brightness of your LED projector and is suitable for quick presentations of up to ninety (90) minutes. • Standard - This mode fits general display uses of the LED projector. • Theater - This mode is recommended when using the LED projector to display videos.
LED projector E-Manual
Appendices Appendices Appendices LED projector E-Manual 37
FAQs 1. Does my LED projector work with all phones? The E1Z LED projector will work with android 5.0 or above devices that support host storage mode. 2. My LED projector does not project anything. How can I fix this? You can try doing any of the following suggestions: • Ensure that you have installed the companion apps. • If the DisplayLink Presenter app does not pop-up when you connect your android device, try restarting your LED projector and your android device.
5. Audio is stuttering and not playing correctly from my LED projector. USB audio performance may vary across different android devices and manufacturers. If audio performance from your android device is inconsistent, we recommend disabling USB audio routing and use the internal speakers instead. To manually configure the USB audio routing settings, go to Settings > About > Software information > Build number (tap a few times) > Settings > Developer options > Disable USB audio routing.
Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
Specifications for E1Z LED projector Display Projection Lens Video Features Display Technology Light Source Light Source Life (max) True Resolution (native) Light Output (Max. lumens) Contrast Ratio Color Saturation (NTSC) Display Colors Throw Ratio Projection Distance Projection/Screen Size Projection Offset Zoom Ratio R/G/B LED 30,000 hrs WVGA 854 x 480 150 Lumens 3500:1 DCR 100% 16.7 million colors 1.4 (32 in. @ 1 m @ 16:9) 0.5 m to 3.7 m 15 in. to 120 in.
Signal Frequency Power Noise Interface Digital Signal Frequency Power Consumption (Typical) Power Standby mode Internal Battery Battery Life Acoustic Noise Dimension Weight Operating Temperature Operating Humidity <18W <0.5W 6400mAh (1A@5V) 24Wh (up to 5 hours) 30 dB (Standard mode) 28 dB (Theater mode) Signal Input USB (Android 5.0/ Windows) Audio Out Earphone out USB 2.0 Port Mechanical Design 24.7 KHz(H) to 74.
Accessories Two USB Type A to micro USB Type B cables, micro USB to micro USB cable, USB Type C OTG, projector cover, power adapter, AC plug, warranty card, quick start guide Regulation Approvals CB, CE, FCC, VCCI, CU, C-Tick, CCC, PSE, IEC62471, CEC NOTE: 44 • Specifications are subject to change without prior notice. • Product availability may vary by region. • All brand and product names mentioned are trademarks of their respective companies.
