Desktop PC D340MF/D3401SFF S340MF/S3401SFF User Guide
E18418 Revised Edition v3 July 2021 Copyright © 2021 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Contents Notices ................................................................................................................................................. 4 Safety information............................................................................................................................ 9 Conventions used in this guide.................................................................................................11 Where to find more information..........................................
Notices ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.
Avertissement relatif aux batteries Lithium ATTENTION ! Danger d’explosion si la batterie n’est pas correctement remplacée. Remplacer uniquement avec une batterie de type semblable ou équivalent, recommandée par le fabricant. Jeter les batteries usagées conformément aux instructions du fabricant. Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science, and Economic Development Canada licence exempt RSS standard(s).
This class B digital apparatus complies with Canadian ICES-003. Déclaration du Département Canadien des Communications Cet appareil numérique ne dépasse pas les limites de classe B en terme d’émissions de nuisances sonores, par radio, par des appareils numériques, et ce conformément aux régulations d’interférence par radio établies par le département canadien des communications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
RF Equipment Notices CE: European Community Compliance Statement The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300 GHz). Wireless Radio Use This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band. For the standard EN 300 440 V2.1.1, the device operating in 802.11a/n/ac mode is considered as a receiver category 2.
Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/.
Safety information Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth. • DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. • DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
Package contents OR Desktop PC Desktop PC Keyboard x1 OR D340MF/D3401SFF S340MF/S3401SFF Installation Guide Mouse x1 Power cord x1 Installation Guide x1 Warranty Card x1 • If any of the above items is damaged or missing, contact your retailer. • The illustrated items above are for reference only. Actual product specifications may vary with different models.
ENGLISH Chapter 1 Getting started Welcome! Thank you for purchasing the ASUS Desktop PC! The ASUS Desktop PC provides cutting-edge performance, uncompromised reliability, and usercentric utilities. All these values are encapsulated in a stunningly futuristic and stylish system casing. Read the ASUS Warranty Card before setting up your ASUS Desktop PC. Getting to know your computer Illustrations are for reference only. The ports, their locations and the chassis color vary with different models.
ENGLISH Front a b c d a b c d Power button. Press this button to turn on your computer. Optical disk drive bay (Optional). There is an optical disk drive in this bay. Microphone port. This port connects to a microphone. Headphone port. This port connects to a headphone or speaker. Supported by ASUS Audio Wizard.
ENGLISH Option A: a USB 3.1 Gen 1 Type-A port b USB 3.1 Gen 1 Type-C port (5V/1.5A; for data transfer only) c d USB 2.0 ports Option B: a b USB 3.1 Gen 1 Type-A ports c d USB 2.0 ports Option C: a b c d USB 3.
Rear ENGLISH 115 Power connector. Plug the power cord to this connector. PS/2 Keyboard port. This port is for a PS/2 keyboard. PS/2 Mouse port. This port is for a PS/2 mouse. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others. DVI-D port (optional). This port is for any DVI-D compatible device. DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with DVI-I.
LAN port LED indications Speed LED Status Description Status Description OFF No link OFF 10Mbps connection ORANGE Linked ORANGE 100Mbps connection Orange (Blinking) Data activity GREEN 1Gbps connection Orange (Blinking then steady) Ready to wake up from S5 mode - - ACT/LINK SPEED LED LED ENGLISH Activity/Link LED LAN port Microphone port (pink). This port connects to a microphone. Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1, 5.1and 7.
Serial port (optional). This 9-pin COM port is for pointing devices or other serial devices. ENGLISH ASUS Graphics Cards (on selected models only). The display output ports on these optional ASUS Graphics Cards may vary with different models.
Setting up your computer ENGLISH This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord to your computer. Connecting an external monitor Using the ASUS Graphics Card (on selected models only) Connect your monitor to the display output port on the discrete ASUS Graphics Card. To connect an external monitor using the ASUS Graphics Card: 1. Connect a monitor to a display output port on the ASUS Graphics Card. 2.
Connecting a USB keyboard and a USB mouse 115 ENGLISH Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer. Connecting the power cord Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source.
Turning your computer ON ENGLISH This section describes how to turn on your computer after setting up your computer. Turning your computer ON To turn your computer ON: 1. Turn your monitor ON. 2. Press the power button on your computer. Power button Power button D340MF/D3401SFF 3. S340MF/S3401SFF Wait until the operating system loads automatically.
ENGLISH Chapter 2 Connecting devices to your computer Connecting a USB storage device This desktop PC provides USB 2.0, and USB 3.1 Gen 1 ports on the front and rear panels. The USB ports allow you to connect USB devices such as storage devices. To connect a USB storage device: • Insert the USB storage device to your computer.
Connecting microphone and speakers ENGLISH This desktop PC comes with microphone ports and speaker ports on both the front and rear panels. The audio I/O ports located on the rear panel allow you to connect 2.1-channel, 4.1-channel, 5.1-channel, and 7.1-channel speakers.
ENGLISH Connecting 2.1-channel Speakers Connecting 4.1-channel Speakers Connecting 5.
Connecting 7.
Connecting multiple external displays ENGLISH Your desktop PC may come with VGA, HDMITM, or DVI ports and allows you to connect multiple external displays. Setting up multiple displays When using multiple monitors, you are allowed to set display modes. You can use the additional monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop. To set up multiple displays: 1. Turn off your computer. 2.
Turn on your computer. 4. From the Start menu, click Settings > System > Display. 5. Configure the settings for your displays. ENGLISH 3. For some graphic cards, only the monitor that is set to be the primary display has display during POST. The dual display function works only under Windows. Connecting an HDTV Connect a High Definition TV (HDTV) to the HDMITM port of your computer. • You need an HDMITM cable to connect the HDTV and the computer. The HDMITM cable is purchased separately.
ENGLISH S340MF/S3401SFF 28 Chapter 2: Connecting devices to your computer
ENGLISH Chapter 3 Using your computer Proper posture when using your Desktop PC When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC.
ENGLISH Chapter 4 Connecting to the Internet Wired connection Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN). Connecting via a DSL/cable modem To connect via a DSL/cable modem: 1. Set up your DSL/cable modem. Refer to the documentation that came with your DSL/cable modem. 2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem. 115 Modem RJ-45 cable 3.
Connecting via a local area network (LAN) 1. ENGLISH To connect via a LAN: Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN. 115 RJ-45 cable 2. Turn on your computer. 3. Configure the necessary Internet connection settings. LAN • Contact your network administrator for details or assistance in setting up your Internet connection.
Configuring a dynamic IP/PPPoE network connection To configure a dynamic IP/PPPoE network connection: ENGLISH 1. Launch Network and Sharing Center in either of these two ways: a) From the taskbar, right-click , then click Open Network and Sharing Center. b) From the Start menu, click Settings > Network & Internet > Ethernet > Network and Sharing Center. 2. From the Open Network and Sharing Center screen, click Change Adapter settings. 3. Right-click on your LAN and select Properties. 4.
Return to the Network and Sharing Center and then click Set up a new connection or network. 7. Select Connect to the Internet and click Next. 8. Select Broadband (PPPoE) and click Next. 9. Follow the next onscreen instructions to complete the setup. ENGLISH 6. Configuring a static IP network connection To configure a static IP network connection: 1. Repeat steps 1 to 4 of the previous section. 2 Click Use the following IP address. 3.
Wi-Fi connection (on selected models only) Connect your computer to the Internet through a wireless connection. ENGLISH To establish a wireless connection, you need to connect to a wireless access point (AP). 115 Wireless AP Modem To increase the range and sensitivity of the wireless radio signal, connect the external antennas to the antenna connectors on the ASUS WLAN Card.
ENGLISH Chapter 5 Troubleshooting Troubleshooting This chapter presents some problems you might encounter and the possible solutions. ? ? My computer cannot be powered on and the power LED on the front panel does not light up. • Check if your computer is properly connected. • Check if the wall outlet is functioning. • Check if the Power Supply Unit is switched on. Refer to the section Turning your computer ON in Chapter 1. My computer hangs.
? The arrow keys on the number key pad are not working. ENGLISH Check if the Number Lock LED is off. When the Number Lock LED is on, the keys on the number key pad are used to input numbers only. Press the Number Lock key to turn the LED off if you want to use the arrow keys on the number key pad. ? ? ? 36 No display on the monitor. • Check if the monitor is powered on. • Ensure that your monitor is properly connected to the video output port on your computer.
? ENGLISH I want to restore or undo changes to my computer’s system settings without affecting my personal files or data. You can use Windows® 10 Refresh your PC without affecting your files recovery option to restore or undo changes to your computer’s system settings without affecting your personal data such as documents or photos. To use this recovery option, click Settings > Update & recovery > Recovery from the Start menu, select Refresh your PC without affecting your files, and click Get started.
Power ENGLISH Problem No power (The power indicator is off) Possible Cause Action Incorrect power voltage • S et your computer’s power voltage switch to your area’s power requirements. • Adjust the voltage settings. Ensure that the power cord is unplugged from the power outlet. Your computer is not turned on. Press the power key on the front panel to ensure that your computer is turned on. Your computer’s power cord is not properly connected.
LAN Cannot access the Internet Possible Cause Action The LAN cable is not connected. Connect the LAN cable to your computer. LAN cable problems Ensure the LAN LED is on. If not, try another LAN cable. If it still does not work, contact the ASUS service center. Your computer is not properly connected to a router or hub. Ensure that your computer is properly connected to a router or hub. Network settings Contact your Internet Service Provider (ISP) for the correct LAN settings.
System ENGLISH Problem System speed is too slow The system often hangs or freezes. 40 Possible Cause Action Too many programs are running. Close some of the programs. Computer virus attack • Use an anti-virus software to scan for viruses and repair your computer. • Reinstall the operating system. Hard disk drive failure • Send the damaged hard disk drive to ASUS Service Center for servicing. • Replace with a new hard disk drive.
CPU Too noisy right after turning on the computer. Possible Cause Action Your computer is booting up. It is normal. The fan runs on its full speed when the computer is powering on. The fan slows down after entering the OS. The BIOS settings have been changed. Restore the BIOS to its default settings. Old BIOS version Update the BIOS to the latest version. Visit the ASUS Support site at https:// www.asus.com/support to download the latest BIOS versions. The CPU fan has been replaced.
ENGLISH 42 Chapter 5: Troubleshooting
ASUS Desktop PC Windows® 10 User Manual Appendix Windows® 10 User Manual E10435 First Edition May 2015 Copyright © ASUSTeK Computer Inc.
ENGLISH
Starting for the first time ENGLISH When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows® 10 operating system. To start your Desktop PC for the first time: 1. Press the power button on your Desktop PC. Wait for a few minutes until the setup screen appears. 2. From the setup screen, pick your region and language that you want to use on your desktop PC. 3. Carefully read the License Terms, then tap I Accept. 4.
Using the Windows® 10 UI ENGLISH The Windows® 10 User Interface (UI) includes the favorite Start menu and the tiled-formatted Start screen. It includes the following features you can use while working on your Desktop PC.
Start screen ENGLISH The Start screen , which appears together with the Start menu, helps organize all the apps you need in just one place. The apps on the Start screen are displayed on tiled-format for easy access. Some apps require signing in to your Microsoft account before they are fully launched. Click to restore the Start screen Moving apps on the Start screen You can move apps from the Start screen simply through dragging and dropping the app to your preferred location.
Taskbar ENGLISH Windows® 10 comes with the standard taskbar, which keeps all your currently running apps or items in the background. Unpinning apps from the taskbar 1. From the Start screen or taskbar, right-click the app you want to unpin. 2. Click Unpin from Start or Unpin this program from taskbar to remove the app from the Start screen or taskbar. Using the Task View When you have several running apps, you can click running apps, and click on an app or item to launch it.
Snap feature ENGLISH The Snap feature displays about four apps or more in one screen, allowing you to work or switch among apps. Using Snap Use your Desktop PC’s mouse or keyboard to activate Snap onscreen. Using your mouse a) Launch an app, then drag and release on a screen corner to snap it in place. b) Snap another app to your preferred location on the screen. Using your keyboard a) Launch an app, press snap the app in place.
Keyboard shortcuts ENGLISH Using your keyboard, you can also use the following shortcuts to help you launch apps and navigate Windows® 10.
Launches the magnifier and zooms in your screen. + <+> + ENGLISH Zooms out your screen. + <-> Opens the Narrator Settings. Removing everything and reinstalling Windows® 10 Restoring your PC to its original factory settings can be done using the Remove everything and reinstall options in PC Settings. Refer to the steps below to use this option. Back up all your data before using this option. This process may take a while to complete. 1.