Quick Start Guide

ZenWiFi AC
Wireless AC3000 Tri Band Gigabit Router
Model: CT8
Quick
Start Guide
1
Plug the adapter into the DCIN port, and press the Power On/Off switch.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
ZenWiFi AC Overview
WAN port
Connect your modem to this port
with a network cable.
LAN ports 1-3
Connect your PC to a LAN port with
a network cable.
Before Setup
ASUS Router App
AiMesh Setup Steps
Troubleshooting
1
Find two ZenWiFi AC, and power both on.
2
Use a network cable to connect your modem to the WAN port of either ZenWiFi AC. This
ZenWiFi AC will be the AiMesh router, and the other ZenWiFi AC will be the AiMesh node.
3
The LED turns solid blue to indicate that ZenWiFi AC is ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh Setup Steps
AiMesh routerAiMesh node
Download free ASUS Router APP to set up
and manage your router(s).
AiMesh routerAiMesh node
within
1-3 meters
Prepare
01
Place your AiMesh router and node within 1-3 meters of each
other during the setup process.
AiMesh node
02
Keep your AiMesh node powered on and standby for AiMesh
system settings.
Enable Bluetooth on your phone. Launch ASUS Router APP, and then follow the on-screen in-
structions to finish the AiMesh setup.
Enabling Bluetooth Launching ASUS Router APP
03 04
If your AiMesh router cannot find any AiMesh node nearby or
synchronization fails, please check the following and try again.
a
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is
within 1-3 meters.
b
Your AiMesh node is powered on.
DC Power adapter DC Output: +19V with max 1.75A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
Power On/OffDC-IN port
WAN port
LAN ports 1-3
USB 3.0/2.0 port