CPX20 Series Zero Client BOX User Guide
Table of contents Notices.......................................................................................................... iv Safety information........................................................................................ v Care and cleaning........................................................................................ vi ii 1.1 Welcome........................................................................................ 1-1 1.2 Package contents...........................
Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Use only the AC/DC adapter model: AD891M21010ALF&AD891M21210ALF • Before setting up the box, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the zero client to rain or moisture. • Never try to open the zero client cabinet. The dangerous high voltages inside the zero client may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself.
Care and cleaning • Before you lift or reposition your zero client , it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the zero client . When lifting or carrying the zero client , grasp the edges of the zero client . Do not lift the zero client by the stand or the cord. • Cleaning. Turn your zero client off and unplug the power cord. Clean the zero client surface with a lint-free, non-abrasive cloth.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
1.1 Welcome Thank you for purchasing the ASUS® zero client box . The latest zero client box from ASUS delivers you a seamless desktop and viewing experiences. Please enjoy the convenient and delightful experience that the zero client brings to you! 1.2 Package contents Check your package for the following items: Box set Wall mount Base and screw Quick start guide Warranty card Adapter DVI Cable • 1-1 If any of the above items is damaged or missing, contact your retailer immediately..
1.3 1. • Assembling the zero client box Use Base Assembly Attach the base to the box and fix with the screw to join them tightly. You can easily tighten the screw by screw driver. 1 2. 2 Use Wall mount Assembly • Attach the wall mount to the back of display and fix with the screw to join them the tightly. • Snap the box into the wall mount (You can use 100x100mm or 75x75mm two modes to lock it).
1 2 3 4 or 1-3 Chapter 1: Product Introduction
1.4 Zero client introduction 1.4.1 Front of the box 1 1. 3 4 5 Power Indicator: • 2. 2 The color of power indicator is as below. Client Link LED Indicator: • The color of client link LED lndicator is as below. Status description LED1 White Client power on LED1 Orange Power Off and Wake On Lan/ Wake On USB LED2 Green Link to virtual desktop 3. USB connector 4. Earphone-out 5.
1.4.2 Rear of the box 1 1-5 1. Kensington lock 2. Power-in jack 3. DVI-I 4. DVI-D 5. RJ45 6.
1.4.3 Key Power Link(LED2) 1.4.
2.1 Client setting 1. Turn on power 2. Login Client widget, click “[Options]“ on top left corner. Options 3. Select “[Options]” --> “[Configuration]”.
4. Enter “[Configuration]” --> [Network],and select “Enable DHCP”. Configuration Network IPv6 SCEP Label Discovery Session Language Power Display Access Audio Reset Change the network settings for the device Enable DHCP: IP Address: 192 . 168 . 100 . 51 Subnet Mask: 255 . 255 . 255 . 0 Gateway: 192 . 168 . 100 . 1 Primary DNS Server: 192 . 168 . 100 . 2 Secondary DNS Server: 0 . 0 .0 .0 Domain Name: FQDN: Auto Ethernet Mode: Enable 802.
6. Select [Language] sheet ,and choice requisite language, then click “Apply” to execute. Configuration Network IPv6 SCEP Label Discovery Session Language Power Display Access Audio Reset Select language for the user interface Language: Keyboard Layout: English US OK Cancel Apply 7. Select [OK] to finish [Configuration]. 8. Return to main manual, select [Options] on top left corner and go to [User settings].
9. Select [Certificate] sheet, choice item and setting, then click [OK]. User Settings Certificate Mouse Keyboard Image Display Topology Touch Screen vmware Horizon View Client TM Certificate Checking Mode: This mode determines how the client proceeds when it cannot verify that your connection to the server is secure. It is not recommended that you change this setting unless instructed to do so by your system administrator.
11. Enter “User name” and “password”, then click [Login]. https://192.168.100.252 Enter your user name and password User name: Password: Server: 192.168.100.252 Login Cancel 12. Click [Connect]. Log on to desktop win7 Connect Reser VM Cancel 13. Enter client interface.
14. Select desktop “Start”, choice “Logout” to exit client.
3.1 Specifications Model Max. Resolution CPX20 Single 1920 x 1200/60 Dual 2560 x 1600/60 Power ON Consumption Mic phone ON Mode: <20 W Yes Earphone Yes Power off < 0.8 W Power off and wake on LAN < 2.5 W Power off and wake on USB < 1.0 W Mounting Interface Phys. Dimension (WxHxD) Box Dimension (WxHxD) Net Weight (Esti.) Gross Weight (Esti.) Voltage Rating ASUS LCD Monitor CPX20 Series 100mm x 100mm & 75mm x 75mm 135 x 204.8 x 84 mm 195.6 x 31.2 x 130.5 mm 0.6 kg 1.
3.2 Trouble shooting (FAQ) Problem Power LED is not ON 3-2 Possible Solution • Press the button to check if the box is in the ON mode. • Check if the power cord is properly connected to the box and the power outlet.
3.
